<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
  <title></title>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Maia,<br>
<br>
just looking at distances is not enough: in addition, one needs to look
at how those residues appear in maps. It's a part of planned
improvements of NCS refinement.<br>
<br>
However, for the moment phenix.refine stops prompting the user to check
the NCS groups and problem residues. I saw a number of cases where this
helped to identify wrong NCS selections due to atom selection syntax
errors.<br>
<br>
Pavel.<br>
<br>
<br>
On 11/21/09 8:56 AM, Maia Cherney wrote:
<blockquote cite="mid:4B081BB2.5080305@ualberta.ca" type="cite">
  <pre wrap="">Hi Pavel,
I would like to make a suggestion about the use of 
excessive_distance_limit. Instead of shutting down the refinement due to 
excessive_distance over the limit why not use it for excluding only 
those residues from NCS refinement and do the ncs refinement for the 
rest of the residues.

Maia



Pavel Afonine wrote:
  </pre>
  <blockquote type="cite">
    <pre wrap="">By the way, it may be worth of repeating that the .geo file contains 
the list of all the geometry restraints used in phenix.refine 
refinement (bonds, angles, planarities, chiralities, dihedrals, 
non-bonded, NCS, custom defined restraints and edits), for each and 
every atom, making it a complete foot-print of geometry restraints 
used to obtain the final refined structure.

Pavel.

On 11/18/09 11:12 AM, Pavel Afonine wrote:
    </pre>
    <blockquote type="cite">
      <pre wrap="">Hi Shya,

inspect the .geo file for something like "EXCESSIVE DISTANCE" (or 
something similar, I don't remember exactly), and that will give you 
an idea by how much you exceed the default 1.5 value.

It might be worth of looking at those atoms in NCS copies that have 
too large deviations between NCS copies, and if you find that it is 
for the reason, then you may want to exclude them from NCS.

Good luck!
Pavel.


On 11/18/09 11:07 AM, <a class="moz-txt-link-abbreviated" href="mailto:sbiswas2@ncsu.edu">sbiswas2@ncsu.edu</a> wrote:
      </pre>
      <blockquote type="cite">
        <pre wrap="">Hi Pavel,

Whenever I run ncs using the default parameters I get the following:
  The current limit is:
    refinement.ncs.excessive_distance_limit=1.5
  The number of distances exceeding this limit is: 364
  Please correct your model or redefine the limit, e.g. with:
    refinement.ncs.excessive_distance_limit=3
  To disable this message completely define:
    refinement.ncs.excessive_distance_limit=None

It runs fine when you put refinement.ncs.excessive_distance_limit=None in
the command line. My question is what would be the best distance for the
program to run without this message.
thanks,
Shya






  
        </pre>
        <blockquote type="cite">
          <pre wrap="">Hi Raja,

here are a few comments:

- if you used TLS previously and then run a refinement without TLS (that
is "strategy=..." does not include "tls"), the previous TLS refinement
gets invalidated, because phenix.refine will automatically convert
ANISOU into isotropic equivalent. It says it somewhere in .log file.

- the "run 1" looks better than the others indeed (judging by the
R-factors and bond/angles RMSDs at this resolution).

- your original concern was the geometry problems, so using H in
refinement, as well as optimizing weights, may help fixing them. So I
would check the geometry too for all the runs below, and not only
R-factors.

- yesterday Kendall suggested a set of good ideas to try out regarding
NCS.

- I did not understand what you mean by "default extension of high
resolution range in PHENIX". phenix.refine uses all reflections that it
finds in your input data files, unless specified otherwise using
high/low resolution cutoffs and sigma cutoffs. phenix.refine does not
collect any additional data for you -:)

- at 2.9A it is very likely that you still ok to refine individual ADPs
and switching to group ADP can increase R-factors. So no surprises here.
I doubt that using bulk-solvent correction and anisotropic scaling
increases the R-factors; probably you tried it in combination with
something else, and that "something else" was the cause of increased
R-values.

- are you using the latest version of PHENIX ?

Pavel.


On 11/18/09 8:47 AM, Raja Dey wrote:
    
          </pre>
          <blockquote type="cite">
            <pre wrap="">Hi Pavel,
              I finished 4 runs as you suggested. See below:
run1.
phenix.refine 1205A-p21212.mtz nov138_001.pdb ncs_groups.params
main.ncs=true ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
xray_data.high_resolution=2.9 refinement.main.number_of_macro_cycles=5
output.write_maps=true output.prefix=nov17
REMARK Start: r_work = 0.2803 r_free = 0.3036 bonds = 0.012 angles =
1.488
REMARK Final: r_work = 0.2438 r_free = 0.2994 bonds = 0.009 angles =
1.309
b_ave=70.09

run2. with wxc and wxu optimization
phenix.refine 1205A-p21212.mtz nov138_001.pdb ncs_groups.params
main.ncs=true ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
xray_data.high_resolution=2.9 refinement.main.number_of_macro_cycles=5
optimize_wxc=true optimize_wxu=true output.write_maps=true
output.prefix=nov17-opt
REMARK Start: r_work = 0.2803 r_free = 0.3036 bonds = 0.012 angles =
1.488
REMARK Final: r_work = 0.2143 r_free = 0.2961 bonds = 0.032 angles =
3.281
b_ave=64.71

phenix.reduce may21_pdbset.pdb &gt; may21_pdbset_h_added.pdb

run3.  with hydrogen
phenix.refine 1205A-p21212.mtz nov138_001_h_added.pdb ncs_groups.params
main.ncs=true ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
xray_data.high_resolution=2.9 refinement.main.number_of_macro_cycles=5
output.write_maps=true output.prefix=nov17-wh
REMARK Start: r_work = 0.2860 r_free = 0.3123 bonds = 0.085 angles =
1.672
REMARK Final: r_work = 0.2381 r_free = 0.3029 bonds = 0.017 angles =
1.685
b_ave=77.7

run4. with both hydrogen and optimization
phenix.refine 1205A-p21212.mtz nov138_001_h_added.pdb ncs_groups.params
main.ncs=true ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
xray_data.high_resolution=2.9 refinement.main.number_of_macro_cycles=5
optimize_wxc=true optimize_wxu=true output.write_maps=true
output.prefix=nov17-wh-opt
REMARK Start: r_work = 0.2860 r_free = 0.3123 bonds = 0.085 angles =
1.672
REMARK Final: r_work = 0.2447 r_free = 0.3032 bonds = 0.020 angles =
1.922
b_ave=80.75

It looks output from run1 is the best, adding hydrogen and optimizing
wxc and wxu did not help much.
I have had little better Rfree and rmsd at the end of my last run.


You are right. the commands I used at the last stage looks weird. Before
that run I have used
"strategy=rigid_body+individual_sites+group_adp+tls" and also included
bulk_solvent and scaling. The map is pretty good. But, the number of
reflections used in the refinement was more than that in mtz file and
that was the warning in the pdb validation summary letter. I think
that's because default extension of high resolution range in PHENIX. So,
I needed to run 1 macro cycle with a little lower high resolution 2.9A
with the last refined pdb. I found those are the combination of commands
gives the best R, Rfree and rmsd for bonds and angles. As soon as I was
including bulk solven and scaling correction and/or b_group the values
were increasing. Although I don't have clear explanation, but that is
what I found. Any way these are very little differences and might not be
so important.

I fixed the problem in dna. The problem was related with the occupancy
of the 2 alternate conformations of dna. But, I still have 8 amino
acids' (out of 400) phy, psy  out side Ramachandran plot. Probably this
does not mater much if I I deposite this co-ordinate in PDB.
Thanks for all your suggestions though.

Regards...
Raja


----- Original Message -----
From: Pavel Afonine <a class="moz-txt-link-rfc2396E" href="mailto:PAfonine@lbl.gov">&lt;PAfonine@lbl.gov&gt;</a>
Date: Tuesday, November 17, 2009 12:20 pm
Subject: Re: [phenixbb] fixing geometry for deposition
To: PHENIX user mailing list <a class="moz-txt-link-rfc2396E" href="mailto:phenixbb@phenix-online.org">&lt;phenixbb@phenix-online.org&gt;</a>


      
            </pre>
            <blockquote type="cite">
              <pre wrap="">Hi Raja,


        
              </pre>
              <blockquote type="cite">
                <pre wrap="">              I used the following commands at the last stage of

          
                </pre>
              </blockquote>
              <pre wrap="">refinement:&gt;

        
              </pre>
              <blockquote type="cite">
                <pre wrap="">phenix.refine 1205A-p21212.mtz nov138_001.pdb

          
                </pre>
              </blockquote>
              <pre wrap="">simulated_annealing=false ncs_groups.params main.ncs=true
ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
main.bulk_solvent_and_scale=false strategy=rigid_body+individual_sites
xray_data.high_resolution=2.9 refinement.main.number_of_macro_cycles=1
output.write_maps=true output.prefix=nov139 --overwrite

        
              </pre>
              <blockquote type="cite">
                <pre wrap="">          
                </pre>
              </blockquote>
              <pre wrap="">The above command seems extremely weird to me for the following
reasons:
1) Bulk-solvent correction and anisotropic scaling always has to be
done
(unless you are experimenting with fake data or these corrections
have
been already applied to Fobs, which is bad ideas anyway). By using
"main.bulk_solvent_and_scale=false" you turn bulk-solvent
correction and
anisotropic scaling off.

2) By default, phenix.refine does 3 refinement macro-cycles, but
often
(depending how far you are from the final model) this is not enough
for
refinement to converge, so increasing it to 5 or so is a good idea.
Doing just one macro-cycle
(refinement.main.number_of_macro_cycles=1)
does not make much sense to me. By the way, you can use shortcuts
like
"main.number_of_m=5".

3) You can drop this off the list since it is the default setting
anyway: "simulated_annealing=false".

4) The refinement strategy: "strategy=rigid_body+individual_sites".
Normally, you do the rigid body refinement at initial stages of
refinement when your model is poor, and not at the final run. This
is
because the rigid-body refinement can be very rude on your model:
bonds
can be broken between rigid groups since no restraints is used, for
example. Also, it's strange that the ADP refinement is turned off -
it's
always good to do, and at 2.8A you can still refined individual
ADPs.
Well, I'm not mention using TLS...

So, I would modify the above command as following:

phenix.refine 1205A-p21212.mtz nov138_001.pdb ncs_groups.params
main.ncs=true ncs.find_automatically=false
refinement.ncs.excessive_distance_limit=None
xray_data.high_resolution=2.9 output.write_maps=true
output.prefix=test
--overwrite

and try running it as is, and with adding keywords
"optimize_wxc=true
optimize_wxu=true", using a model with or w/o H riding H atoms,
etc...
what I wrote in my previous email.


        
              </pre>
              <blockquote type="cite">
                <pre wrap="">Regarding amino acids phy, psy..... I tried real space

          
                </pre>
              </blockquote>
              <pre wrap="">refinement/regularization in coot,

This is not the same as what I suggested to try in my previous
email.
Anyway, I would first try the modified command above and only then
try
other suggested things.

Good luck,
Pavel.

_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>


        
              </pre>
            </blockquote>
            <pre wrap="">_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>

      
            </pre>
          </blockquote>
          <pre wrap="">_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>

    
          </pre>
        </blockquote>
        <pre wrap="">_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>
  
        </pre>
      </blockquote>
      <pre wrap="">------------------------------------------------------------------------

_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>
  
      </pre>
    </blockquote>
    <pre wrap="">------------------------------------------------------------------------

_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>
  
    </pre>
  </blockquote>
  <pre wrap=""><!---->
_______________________________________________
phenixbb mailing list
<a class="moz-txt-link-abbreviated" href="mailto:phenixbb@phenix-online.org">phenixbb@phenix-online.org</a>
<a class="moz-txt-link-freetext" href="http://www.phenix-online.org/mailman/listinfo/phenixbb">http://www.phenix-online.org/mailman/listinfo/phenixbb</a>
  </pre>
</blockquote>
</body>
</html>