December 2019 - cctbxbb - phenix-online.org

CCTBX documentation questionnaire
by Dorothee Liebschner 14 Jan '20

14 Jan '20

Hi everyone, During this year's ECM computing school, it came up that the CCTBX does not have a lot of documentation. This seems to be a major reason why people don't use it, even if they would like to employ the libraries. We would like to find out which parts of the CCTBX are the most interesting for users. We certainly cannot provide extensive documentation for the entire toolbox, but we can see what we can do once we know the main areas of interest. So if you were in the situation of wanting to use the CCTBX but decided to stay away from it because the documentation was non-existent or obscure, please let us know by filling out the questionnaire below (it's anonymous): questionnaire CCTBX documentation <https://forms.gle/9RawJFfHyEvhCVVP7> Best wishes, Dorothee -- Project Scientist, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory 1 Cyclotron Road, M/S 33R0345 Berkeley, CA 94720 Tel: (510) 486-5709 Fax: (510) 486-5909 Web: https://phenix-online.org

11 40

Re: [cctbxbb] [EXTERNAL] cctbxbb Digest, Vol 129, Issue 6
by Mooers, Blaine H.M. (HSC) 21 Dec '19

21 Dec '19

By following Billy's directions and using new envs, I was able to install cctbx with conda on Mac OS 15.2 with Python 3.6, 3.7, and 3.8. I was able to run some simple scripts. I ran the test that Billy suggested and also got 30 errors. Best regards, Blaine Blaine Mooers, Ph.D. Associate Professor Department of Biochemistry and Molecular Biology College of Medicine University of Oklahoma Health Sciences Center S.L. Young Biomedical Research Center (BRC) Rm. 466 975 NE 10th Street, BRC 466 Oklahoma City, OK 73104-5419 ________________________________________ From: cctbxbb-bounces(a)phenix-online.org [cctbxbb-bounces(a)phenix-online.org] on behalf of cctbxbb-request(a)phenix-online.org [cctbxbb-request(a)phenix-online.org] Sent: Friday, December 20, 2019 2:00 PM To: cctbxbb(a)phenix-online.org Subject: [EXTERNAL] cctbxbb Digest, Vol 129, Issue 6 Send cctbxbb mailing list submissions to cctbxbb(a)phenix-online.org To subscribe or unsubscribe via the World Wide Web, visit https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… or, via email, send a message with subject or body 'help' to cctbxbb-request(a)phenix-online.org You can reach the person managing the list at cctbxbb-owner(a)phenix-online.org When replying, please edit your Subject line so it is more specific than "Re: Contents of cctbxbb digest..." Today's Topics: 1. Re: some thoughts on cctbx and pip (Billy Poon) ---------------------------------------------------------------------- Message: 1 Date: Fri, 20 Dec 2019 11:15:35 -0800 From: Billy Poon <BKPoon(a)lbl.gov> To: cctbx mailing list <cctbxbb(a)phenix-online.org> Subject: Re: [cctbxbb] some thoughts on cctbx and pip Message-ID: <CAHmYUcYdeXspPwWW2fOOBg0p734p9XYKqS-LiXXqyU-ydBu4pw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi everyone, I updated the conda packages on the cctbx-dev channel and there are also now packages for macOS. The old packages have been removed so you can create a new environment with conda create -n test -c cctbx-dev cctbx python=2.7 conda activate test where "test" is the environment name and 2.7 is the python version. For the python version, you can also pick 3.6, 3.7, or 3.8. I think the latest conda will install 3.8 as the default python if the python argument is not provided. Or install into an existing environment (with python already installed) with the same command as before, conda install -c cctbx-dev cctbx Again, your .condarc file should have conda-forge as the first channel so that dependencies can be pulled correctly. The dispatchers should work now and $LIBTBX_BUILD will be set on activation of an environment (and unset on environment deactivation) or after installing into an existing environment, so you can do more interesting things like iotbx.fetch_pdb --all --mtz 1kp8 However, this package does not install databases, so molprobity.molprobity 1kp8.pdb 1kp8.mtz will fail because the database is not available (also probe and reduce are not built). Some known issues in no particular order, 1) You can run "libtbx.run_tests_parallel module=cctbx nproc=Auto" to run tests, but not all the test files were copied, so I got 30 failures here. The final package will probably not have the test files. 2) The other python dispatchers, like "cctbx.python", were not updated, so those will fail. But you can just run "python" in the active environment. 3) Parts of mmtbx still need to be updated for Python 3. 4) The LIBTBX_BUILD variable should be set for sh and csh shells. Let me know if it's not working for your shell (i.e. "echo $LIBTBX_BUILD" should show the same thing as $CONDA_PREFIX). 5) One future step is to enable building other CCTBX-like modules with this conda package. This will require some bookkeeping updates so that modules in the conda environment and the modules being built are tracked properly. Also, making sure that all the necessary headers exist in $PREFIX/include. Gergely, let me know if your scripts are working. Happy holidays! -- Billy K. Poon Research Scientist, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory 1 Cyclotron Road, M/S 33R0345 Berkeley, CA 94720 Tel: (510) 486-5709 Fax: (510) 486-5909 Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… On Wed, Dec 18, 2019 at 11:25 AM Billy Poon <BKPoon(a)lbl.gov> wrote: > Hi Gergely, > > That's the other information that hasn't been updated yet in the conda > package. :) > > For LIBTBX_BUILD, I can set up environment variables sort of how the conda > gcc package sets up environment variables. I have to double check to see if > they're set after installation of the package and after activation of an > environment. The variable will just be a copy of $CONDA_PREFIX. > > The libtbx_env file is a file that exists in $LIBTBX_BUILD that basically > stores configuration information. I'll have to modify the contents to > update the locations of the different modules since the conda package will > not have a "modules" directory. > > -- > Billy K. Poon > Research Scientist, Molecular Biophysics and Integrated Bioimaging > Lawrence Berkeley National Laboratory > 1 Cyclotron Road, M/S 33R0345 > Berkeley, CA 94720 > Tel: (510) 486-5709 > Fax: (510) 486-5909 > Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… > > > On Wed, Dec 18, 2019 at 2:08 AM Gergely Katona <gkatona(a)gmail.com> wrote: > >> Hi Billy, >> >> Conda install went fine with your instructions after rearranging the >> channels by putting cctbx last. I removed all environmental variables >> and previous build of cctbx. >> >> import sys >> print (sys.path, sys.prefix) >> >> ['/home/gergely/anaconda3/lib/https://urldefense.proofpoint.com/v2/url?u=http-3A__python36.zip&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ST4siK2y7PNpS4anr425eXK4FO6ig7oA-XNHoaHgCpY&e= ', >> '/home/gergely/anaconda3/lib/python3.6', >> '/home/gergely/anaconda3/lib/python3.6/lib-dynload', '', >> '/home/gergely/anaconda3/lib/python3.6/site-packages', >> '/home/gergely/anaconda3/lib/python3.6/site-packages/IPython/extensions', >> '/home/gergely/.ipython'] /home/gergely/anaconda3 >> >> Many imports went fine including pymc3, but I encountered problems >> with these three: >> >> from cctbx import miller >> import iotbx.pdb >> from iotbx import reflection_file_reader, mtz >> >> >> I also got type error when handling space groups. >> >> >> >> >> --------------------------------------------------------------------------- >> KeyError Traceback (most recent call >> last) >> <ipython-input-5-cedbd4f84f3d> in <module> >> 25 from cctbx import uctbx >> 26 from cctbx import sgtbx >> ---> 27 from cctbx import miller >> 28 #from iotbx import reflection_file_reader, mtz >> 29 sns.set_context("poster") >> >> ~/anaconda3/lib/python3.6/site-packages/cctbx/miller/https://urldefense.proofpoint.com/v2/url?u=http-3A__-5F-5Finit-5F-5F.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ou8J8HxatN0TDK1PJ-GUgX9YcOgS5Fayhbs61Wt2f7g&e= in >> <module> >> 11 >> 12 from cctbx import crystal >> ---> 13 from cctbx import maptbx >> 14 from cctbx import sgtbx >> 15 from cctbx.sgtbx import lattice_symmetry >> >> ~/anaconda3/lib/python3.6/site-packages/cctbx/maptbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__-5F-5Finit-5F-5F.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ou8J8HxatN0TDK1PJ-GUgX9YcOgS5Fayhbs61Wt2f7g&e= in >> <module> >> 15 from libtbx import adopt_init_args >> 16 from libtbx.utils import Sorry >> ---> 17 import libtbx.load_env >> 18 import math >> 19 import sys, os >> >> ~/anaconda3/lib/python3.6/site-packages/libtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__load-5Fenv.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=dUMVNgDtesLENoxBTvPr4XX4mczuZIsmZzdOmPlGbtI&e= in <module> >> 3 import libtbx.env_config >> 4 import os >> ----> 5 libtbx.env = libtbx.env_config.unpickle() >> 6 libtbx.env.set_os_environ_all_dist() >> 7 libtbx.env.dispatcher_name = >> os.environ.get("LIBTBX_DISPATCHER_NAME") >> >> ~/anaconda3/lib/python3.6/site-packages/libtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__env-5Fconfig.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=2BeTV_6Dw8q_ulzvyRBt0YhebeaqhUvm-em6GAOEaI4&e= in unpickle() >> 2603 >> 2604 def unpickle(): >> -> 2605 build_path = os.environ["LIBTBX_BUILD"] >> 2606 >> set_preferred_sys_prefix_and_sys_executable(build_path=build_path) >> 2607 libtbx_env = open(op.join(build_path, "libtbx_env"), "rb") >> >> ~/anaconda3/lib/python3.6/https://urldefense.proofpoint.com/v2/url?u=http-3A__os.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=y6dOvVLcNHYw8pJU1uwOEPGTH8lLyIp-mgtyv_X2bFQ&e= in __getitem__(self, key) >> 667 except KeyError: >> 668 # raise KeyError with the original key value >> --> 669 raise KeyError(key) from None >> 670 return self.decodevalue(value) >> 671 >> >> KeyError: 'LIBTBX_BUILD' >> >> >> >> >> --------------------------------------------------------------------------- >> ArgumentError Traceback (most recent call >> last) >> <ipython-input-7-2acd3a9ce26a> in <module> >> 26 return >> ms,msnam,mscent,msacent,msnamacent,msnamcent,msnamacent_dstar >> 27 >> ---> 28 >> ms,msnam,mscent,msacent,msnamacent,msnamcent,msnamacent_dstar=initializecrystal() >> >> <ipython-input-7-2acd3a9ce26a> in initializecrystal() >> 11 uc = uctbx.unit_cell(unit_cell) >> 12 wavelength = 1.54980 >> ---> 13 xtal_symm = crystal.symmetry(unit_cell=unit_cell, >> space_group_symbol="P 43 21 2") >> 14 >> 15 ms = >> miller.build_set(crystal_symmetry=xtal_symm,anomalous_flag=True, >> d_min=1.61) >> >> ~/anaconda3/lib/python3.6/site-packages/cctbx/crystal/https://urldefense.proofpoint.com/v2/url?u=http-3A__-5F-5Finit-5F-5F.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ou8J8HxatN0TDK1PJ-GUgX9YcOgS5Fayhbs61Wt2f7g&e= in >> __init__(self, unit_cell, space_group_symbol, space_group_info, >> space_group, correct_rhombohedral_setting_if_necessary, >> assert_is_compatible_unit_cell, raise_sorry_if_incompatible_unit_cell, >> force_compatible_unit_cell) >> 74 if (space_group_symbol is not None): >> 75 self._space_group_info = sgtbx.space_group_info( >> ---> 76 symbol=space_group_symbol) >> 77 elif (space_group is not None): >> 78 if (isinstance(space_group, sgtbx.space_group)): >> >> ~/anaconda3/lib/python3.6/site-packages/cctbx/sgtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__-5F-5Finit-5F-5F.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ou8J8HxatN0TDK1PJ-GUgX9YcOgS5Fayhbs61Wt2f7g&e= in >> __init__(self, symbol, table_id, group, number, space_group_t_den) >> 100 assert group is None >> 101 if (table_id is None): >> --> 102 symbols = space_group_symbols(symbol) >> 103 else: >> 104 if (isinstance(symbol, int)): symbol = str(symbol) >> >> ArgumentError: Python argument types in >> space_group_symbols.__init__(space_group_symbols, str) >> did not match C++ signature: >> __init__(_object*, int space_group_number) >> __init__(_object*, int space_group_number, >> std::__cxx11::basic_string<char, std::char_traits<char>, >> std::allocator<char> > extension='') >> __init__(_object*, int space_group_number, >> std::__cxx11::basic_string<char, std::char_traits<char>, >> std::allocator<char> > extension='', std::__cxx11::basic_string<char, >> std::char_traits<char>, std::allocator<char> > table_id='') >> __init__(_object*, std::__cxx11::basic_string<char, >> std::char_traits<char>, std::allocator<char> > symbol) >> __init__(_object*, std::__cxx11::basic_string<char, >> std::char_traits<char>, std::allocator<char> > symbol, >> std::__cxx11::basic_string<char, std::char_traits<char>, >> std::allocator<char> > table_id='') >> >> >> When I tried to set LIBTBX_BUILD to /home/gergely/anaconda3 (this is >> sys.prefix on my system), I got other problems when importing. Can >> LIBTBX_BUILD be set in the conda package? >> >> >> >> >> --------------------------------------------------------------------------- >> FileNotFoundError Traceback (most recent call >> last) >> <ipython-input-1-7e2b144826cc> in <module> >> 26 from cctbx import sgtbx >> 27 #from cctbx import miller >> ---> 28 from iotbx import reflection_file_reader, mtz >> 29 sns.set_context("poster") >> 30 plt.rcParams.update({'figure.autolayout': True}) >> >> ~/anaconda3/lib/python3.6/site-packages/iotbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__reflection-5Ffile-5Freader.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=yYMogebnDLYk0-5LYB00qDeyEYddmSEzic2HY01p1-4&e= >> in <module> >> 53 >> 54 from __future__ import absolute_import, division, print_function >> ---> 55 from iotbx import mtz >> 56 from iotbx.scalepack import merge as scalepack_merge >> 57 from iotbx.scalepack import no_merge_original_index as >> scalepack_no_merge >> >> ~/anaconda3/lib/python3.6/site-packages/iotbx/mtz/https://urldefense.proofpoint.com/v2/url?u=http-3A__-5F-5Finit-5F-5F.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=ou8J8HxatN0TDK1PJ-GUgX9YcOgS5Fayhbs61Wt2f7g&e= in <module> >> 9 import iotbx_mtz_ext as ext >> 10 >> ---> 11 from iotbx.mtz import extract_from_symmetry_lib >> 12 from cctbx import xray >> 13 import cctbx.xray.observation_types >> >> >> ~/anaconda3/lib/python3.6/site-packages/iotbx/mtz/https://urldefense.proofpoint.com/v2/url?u=http-3A__extract-5Ffrom-5Fsymmetry-5Flib.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=sdo4JC4HEfj-rC7w_ahWQIcYyaTeKakuavIvEeWWbf8&e= >> in <module> >> 1 from __future__ import absolute_import, division, print_function >> 2 from cctbx import sgtbx >> ----> 3 import libtbx.load_env >> 4 import os.path as op >> 5 from six.moves import range >> >> ~/anaconda3/lib/python3.6/site-packages/libtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__load-5Fenv.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=dUMVNgDtesLENoxBTvPr4XX4mczuZIsmZzdOmPlGbtI&e= in <module> >> 3 import libtbx.env_config >> 4 import os >> ----> 5 libtbx.env = libtbx.env_config.unpickle() >> 6 libtbx.env.set_os_environ_all_dist() >> 7 libtbx.env.dispatcher_name = >> os.environ.get("LIBTBX_DISPATCHER_NAME") >> >> ~/anaconda3/lib/python3.6/site-packages/libtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__env-5Fconfig.py&d=DwICAg&c=VjzId-SM5S6aVB_cCGQ0d3uo9UfKByQ3sI6Audoy6dY&r=k0gMbcsdOcdbPUNV5tW66KQSZfXL0ewVDPVBp7tqbks&m=XYalX3Fy1IGs4p_M1YHMvPXXo6HJximT9mf_zMIckxU&s=2BeTV_6Dw8q_ulzvyRBt0YhebeaqhUvm-em6GAOEaI4&e= in unpickle() >> 2605 build_path = os.environ["LIBTBX_BUILD"] >> 2606 >> set_preferred_sys_prefix_and_sys_executable(build_path=build_path) >> -> 2607 libtbx_env = open(op.join(build_path, "libtbx_env"), "rb") >> 2608 env = pickle.load(libtbx_env) >> 2609 if (env.python_version_major_minor != sys.version_info[:2]): >> >> FileNotFoundError: [Errno 2] No such file or directory: >> '/home/gergely/anaconda3/libtbx_env' >> >> On Wed, Dec 18, 2019 at 9:10 AM Billy Poon <BKPoon(a)lbl.gov> wrote: >> > >> > Hi Gergely, >> > >> > I've uploaded linux packages to a new channel, cctbx-dev, and you can >> install it with >> > >> > conda install -c cctbx-dev cctbx >> > >> > in your current environment. You should set your ~/.condarc file to >> pull the other dependencies from the conda-forge channel first, so put >> conda-forge above cctbx. Mine looks like >> > >> > channels: >> > - conda-forge >> > - defaults >> > - cctbx >> > >> > Do you need dxtbx for your scripts? This package does not build that >> part. I think the plan is to build a separate conda package for dxtbx so >> that it can be updated more frequently. I can rebuild the packages to >> include it for testing, but the one being submitted to conda-forge will not >> have it. >> > >> > Also, your error message is probably due to version of HDF5 that the >> development build installs. The https://urldefense.proofpoint.com/v2/url?u=http-3A__bootstrap.py&d=DwICAg&c… script will install 1.10.4, >> but your other dependency is looking for 1.10.5. Installing this cctbx >> conda package should install 1.10.5, which should fix the issue. Also, I'm >> updating those environments and 1.10.5 will be the new default version. >> > >> > Lastly, the dispatchers will not work in these packages because the old >> paths during the build process are still in them and many of them expect >> some additional information that has not been updated in the packages yet. >> I'm in the process of doing that and will update the cctbx-dev channel when >> that's done. However, by starting python, you can import cctbx modules. So >> you can run commands like >> > >> > from scitbx.array_family import flex >> > a = flex.random_double(1000000) >> > b = flex.min_max_mean_double(a) >> > b.min >> > b.max >> > b.mean >> > >> > Thanks! >> > >> > -- >> > Billy K. Poon >> > Research Scientist, Molecular Biophysics and Integrated Bioimaging >> > Lawrence Berkeley National Laboratory >> > 1 Cyclotron Road, M/S 33R0345 >> > Berkeley, CA 94720 >> > Tel: (510) 486-5709 >> > Fax: (510) 486-5909 >> > Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… >> > >> > >> > On Tue, Dec 17, 2019 at 5:39 AM Gergely Katona <gkatona(a)gmail.com> >> wrote: >> >> >> >> Dear Billy, >> >> >> >> Thank you for the detailed explanation, I look forward to do further >> >> testing! I aim to pool all modules under the same environment, if >> >> there are conflicts then I just try to reshuffle the order of imports. >> >> So far this did not cause problems for me even when I was using system >> >> python, but of course it is not the most prudent thing to do. With >> >> anaconda everything is much more standardized and isolated already and >> >> without being superuser I can have my familiar environment at any >> >> synchrotron based cluster. It is great that cctbx will be an integral >> >> part of this ecosystem and this was also the last thing holding me >> >> back from adopting python3. About hdf5, pymc3 requires it and >> >> importing causes a kernel restart with the following error messages, >> >> curiously if I import h5py first this can be avoided. >> >> >> >> Best wishes, >> >> >> >> Gergely >> >> >> >> import pymc3 as pm >> >> >> >> Warning! ***HDF5 library version mismatched error*** >> >> The HDF5 header files used to compile this application do not match >> >> the version used by the HDF5 library to which this application is >> linked. >> >> Data corruption or segmentation faults may occur if the application >> continues. >> >> This can happen when an application was compiled by one version of >> HDF5 but >> >> linked with a different version of static or shared HDF5 library. >> >> You should recompile the application or check your shared library >> related >> >> settings such as 'LD_LIBRARY_PATH'. >> >> You can, at your own risk, disable this warning by setting the >> environment >> >> variable 'HDF5_DISABLE_VERSION_CHECK' to a value of '1'. >> >> Setting it to 2 or higher will suppress the warning messages totally. >> >> Headers are 1.10.4, library is 1.10.5 >> >> SUMMARY OF THE HDF5 CONFIGURATION >> >> ================================= >> >> >> >> General Information: >> >> ------------------- >> >> HDF5 Version: 1.10.5 >> >> Configured on: Tue Oct 22 12:02:13 UTC 2019 >> >> Configured by: conda@16247e67ecd5 >> >> Host system: x86_64-conda_cos6-linux-gnu >> >> Uname information: Linux 16247e67ecd5 4.15.0-1059-azure >> >> #64-Ubuntu SMP Fri Sep 13 17:02:44 UTC 2019 x86_64 x86_64 x86_64 >> >> GNU/Linux >> >> Byte sex: little-endian >> >> Installation point: /home/gergely/anaconda3 >> >> >> >> Compiling Options: >> >> ------------------ >> >> Build Mode: production >> >> Debugging Symbols: no >> >> Asserts: no >> >> Profiling: no >> >> Optimization Level: high >> >> >> >> Linking Options: >> >> ---------------- >> >> Libraries: static, shared >> >> Statically Linked Executables: >> >> LDFLAGS: -Wl,-O2 -Wl,--sort-common >> >> -Wl,--as-needed -Wl,-z,relro -Wl,-z,now -Wl,--disable-new-dtags >> >> -Wl,--gc-sections -Wl,-rpath,/home/gergely/anaconda3/lib >> >> -Wl,-rpath-link,/home/gergely/anaconda3/lib >> >> -L/home/gergely/anaconda3/lib >> >> H5_LDFLAGS: >> >> AM_LDFLAGS: -L/home/gergely/anaconda3/lib >> >> Extra libraries: -lrt -lpthread -lz -ldl -lm >> >> Archiver: >> >> >> /home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/_build_env/bin/x86_64-conda_cos6-linux-gnu-ar >> >> AR_FLAGS: cr >> >> Ranlib: >> >> >> /home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/_build_env/bin/x86_64-conda_cos6-linux-gnu-ranlib >> >> >> >> Languages: >> >> ---------- >> >> C: yes >> >> C Compiler: >> >> >> /home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/_build_env/bin/x86_64-conda_cos6-linux-gnu-cc >> >> CPPFLAGS: -DNDEBUG -D_FORTIFY_SOURCE=2 -O2 >> >> -I/home/gergely/anaconda3/include >> >> H5_CPPFLAGS: -D_GNU_SOURCE >> >> -D_POSIX_C_SOURCE=200809L -DNDEBUG -UH5_DEBUG_API >> >> AM_CPPFLAGS: -I/home/gergely/anaconda3/include >> >> C Flags: -march=nocona -mtune=haswell >> >> -ftree-vectorize -fPIC -fstack-protector-strong -fno-plt -O2 >> >> -ffunction-sections -pipe -I/home/gergely/anaconda3/include >> >> >> -fdebug-prefix-map=/home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/work=/usr/local/src/conda/hdf5_split-1.10.5 >> >> -fdebug-prefix-map=/home/gergely/anaconda3=/usr/local/src/conda-prefix >> >> H5 C Flags: -std=c99 -pedantic -Wall -Wextra >> >> -Wbad-function-cast -Wc++-compat -Wcast-align -Wcast-qual -Wconversion >> >> -Wdeclaration-after-statement -Wdisabled-optimization -Wfloat-equal >> >> -Wformat=2 -Winit-self -Winvalid-pch -Wmissing-declarations >> >> -Wmissing-include-dirs -Wmissing-prototypes -Wnested-externs >> >> -Wold-style-definition -Wpacked -Wpointer-arith -Wredundant-decls >> >> -Wshadow -Wstrict-prototypes -Wswitch-default -Wswitch-enum -Wundef >> >> -Wunused-macros -Wunsafe-loop-optimizations -Wwrite-strings >> >> -finline-functions -s -Wno-inline -Wno-aggregate-return >> >> -Wno-missing-format-attribute -Wno-missing-noreturn -O >> >> AM C Flags: >> >> Shared C Library: yes >> >> Static C Library: yes >> >> >> >> >> >> Fortran: yes >> >> Fortran Compiler: >> >> >> /home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/_build_env/bin/x86_64-conda_cos6-linux-gnu-gfortran >> >> Fortran Flags: >> >> H5 Fortran Flags: -pedantic -Wall -Wextra -Wunderflow >> >> -Wimplicit-interface -Wsurprising -Wno-c-binding-type -s -O2 >> >> AM Fortran Flags: >> >> Shared Fortran Library: yes >> >> Static Fortran Library: yes >> >> >> >> C++: yes >> >> C++ Compiler: >> >> >> /home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/_build_env/bin/x86_64-conda_cos6-linux-gnu-c++ >> >> C++ Flags: -fvisibility-inlines-hidden >> >> -std=c++17 -fmessage-length=0 -march=nocona -mtune=haswell >> >> -ftree-vectorize -fPIC -fstack-protector-strong -fno-plt -O2 >> >> -ffunction-sections -pipe -I/home/gergely/anaconda3/include >> >> >> -fdebug-prefix-map=/home/conda/feedstock_root/build_artifacts/hdf5_split_1571745596770/work=/usr/local/src/conda/hdf5_split-1.10.5 >> >> -fdebug-prefix-map=/home/gergely/anaconda3=/usr/local/src/conda-prefix >> >> H5 C++ Flags: -pedantic -Wall -W -Wundef -Wshadow >> >> -Wpointer-arith -Wcast-qual -Wcast-align -Wwrite-strings -Wconversion >> >> -Wredundant-decls -Winline -Wsign-promo -Woverloaded-virtual >> >> -Wold-style-cast -Weffc++ -Wreorder -Wnon-virtual-dtor >> >> -Wctor-dtor-privacy -Wabi -finline-functions -s -O >> >> AM C++ Flags: >> >> Shared C++ Library: yes >> >> Static C++ Library: yes >> >> >> >> Java: no >> >> >> >> >> >> Features: >> >> --------- >> >> Parallel HDF5: no >> >> Parallel Filtered Dataset Writes: no >> >> Large Parallel I/O: no >> >> High-level library: yes >> >> Threadsafety: yes >> >> Default API mapping: v110 >> >> With deprecated public symbols: yes >> >> I/O filters (external): deflate(zlib) >> >> MPE: no >> >> Direct VFD: no >> >> dmalloc: no >> >> Packages w/ extra debug output: none >> >> API tracing: no >> >> Using memory checker: yes >> >> Memory allocation sanity checks: no >> >> Function stack tracing: no >> >> Strict file format checks: no >> >> Optimization instrumentation: no >> >> >> >> On Tue, Dec 17, 2019 at 8:35 AM Billy Poon <BKPoon(a)lbl.gov> wrote: >> >> > >> >> > Hi Gergely, >> >> > >> >> > Let me build the test package tomorrow. All the gritty details for >> building with conda is being finalized and the official documentation will >> be updated to describe the steps. It would be too confusing to keep >> changing the documentation as the process evolves. You do have the general >> process, though, which is summarized as follows. >> >> > >> >> > 1) Installing dependencies. The cctbx_dependencies metapackage was >> an initial approach for managing the CCTBX dependencies, but after >> contacting the conda-forge folks, they recommended using the --only-deps >> flag. So when the CCTBX conda package is available, you'll be able to get a >> set of dependencies with, >> >> > >> >> > conda install -c conda-forge --only-deps cctbx >> >> > >> >> > By default, the https://urldefense.proofpoint.com/v2/url?u=http-3A__bootstrap.py&d=DwICAg&c… file will automatically install a set >> of dependencies in the "conda_base" directory (and a conda installation if >> one is not found). It just uses standard conda environment files located in >> libtbx/auto_build/conda_envs, so you do not need to install >> cctbx_dependencies as a separate step. The environment files avoid channel >> issues by explicitly defining the channel to pull the packages from and the >> cctbx channel just stores copies of packages from conda-forge. There were >> issues earlier where the conda-forge packages would sometimes be moved to a >> different label. The --use-conda flag also accepts a path to $CONDA_PREFIX >> if you want to use a specific environment for testing. >> >> > >> >> > 2) Building. The https://urldefense.proofpoint.com/v2/url?u=http-3A__bootstrap.py&d=DwICAg&c… file handles that with SCons. >> >> > >> >> > 3) Running. After building, there should be a https://urldefense.proofpoint.com/v2/url?u=http-3A__setpaths.sh&d=DwICAg&c=… (and .csh) >> file that adds build/bin to your path. The build/bin directory has our >> dispatchers, which are just scripts that set up the environment variables >> for you. This prevents other programs from loading our libraries, whose >> versions may conflict. You should see that there is a "python" dispatcher, >> which is a convenience for developers. Otherwise, you can use >> libtbx.python, which will be able to import CCTBX modules. >> >> > >> >> > The running part is where the conda package for CCTBX will be >> different than this build. Since our Python files and extensions modules >> will be in the "site-packages" directory for Python, the PYTHONPATH >> variable will not be needed (and conda suggests that that variable not be >> set). The other CCTBX libraries will be in $CONDA_PREFIX/lib, so >> LD_LIBRARY_PATH is not needed. In an active environment, PATH will already >> be modified. And then our LIBTBX_BUILD directory can be set to sys.prefix. >> >> > >> >> > So with the conda package, you would only need to activate your >> conda environment and CCTBX should integrate with other conda packages. >> What is the conflict with hdf5? That's something that should be fixed. >> Thanks! >> >> > >> >> > -- >> >> > Billy K. Poon >> >> > Research Scientist, Molecular Biophysics and Integrated Bioimaging >> >> > Lawrence Berkeley National Laboratory >> >> > 1 Cyclotron Road, M/S 33R0345 >> >> > Berkeley, CA 94720 >> >> > Tel: (510) 486-5709 >> >> > Fax: (510) 486-5909 >> >> > Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… >> >> > >> >> > >> >> > On Mon, Dec 16, 2019 at 2:53 AM Gergely Katona <gkatona(a)gmail.com> >> wrote: >> >> >> >> >> >> Dear Billy, >> >> >> >> >> >> Thank you for this update and for your efforts! I found a solution >> and >> >> >> indeed most things already work in anaconda3. The steps I took (even >> >> >> if these instructions will have short expiry date): >> >> >> >> >> >> Modified .condarc with: >> >> >> channels: >> >> >> - cctbx >> >> >> - conda-forge >> >> >> - defaults >> >> >> >> >> >> run >> >> >> conda conda install cctbx_dependencies python=3.6 >> >> >> >> >> >> I expect this will work without python=3.6 in the near future. >> >> >> >> >> >> Then compiling cctbx with anaconda3 python went without any problem >> >> >> when using these flags: >> >> >> python https://urldefense.proofpoint.com/v2/url?u=http-3A__bootstrap.py&d=DwICAg&c… --use-conda --python3 --nproc=12 >> >> >> >> >> >> Then I probably did the unorthodox thing and sourced these >> directories: >> >> >> >> >> >> setenv LIBTBX_BUILD /home/gergely/cctbx/build >> >> >> setenv PATH ${PATH}:/home/gergely/cctbx/build/bin >> >> >> setenv PYTHONPATH >> >> >> >> /home/gergely/cctbx/modules/cctbx_project:/home/gergely/cctbx/modules:/home/gergely/cctbx/modules/cctbx_project/boost_adaptbx:/home/gergely/cctbx/build/lib:/home/gergely/cctbx/conda_base/lib/python3.6/site-packages:$PYTHONPATH >> >> >> setenv LD_LIBRARY_PATH >> >> >> >> /home/gergely/cctbx/conda_base/lib:/home/gergely/cctbx/build/lib:$LD_LIBRARY_PATH >> >> >> >> >> >> There is probably a better way to put this into conda environment. >> >> >> With these steps I could run one of my scripts depending on cctbx. >> The >> >> >> only problem I found is that hdf5 library had conflict with another >> >> >> package in conda, but I does not find this as a showstopper. >> >> >> >> >> >> Best wishes, >> >> >> >> >> >> Gergely >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> On Fri, Dec 13, 2019 at 7:23 PM Billy Poon <BKPoon(a)lbl.gov> wrote: >> >> >> > >> >> >> > Hi Gergely, >> >> >> > >> >> >> > It's still a work in progress. I'm sorting out some Windows >> issues right now. I can probably build a test package on a separate channel >> for people that want to test it (let's say next week?). I'll provide >> instructions, but basically, the test conda package will be in its own >> separate channel and the dependencies will be pulled from the conda-forge >> channel. I want most things to be working correctly on Python 2.7, 3.6, >> 3.7, and 3.8 on all 3 platforms. >> >> >> > >> >> >> > Thanks! >> >> >> > >> >> >> > -- >> >> >> > Billy K. Poon >> >> >> > Research Scientist, Molecular Biophysics and Integrated Bioimaging >> >> >> > Lawrence Berkeley National Laboratory >> >> >> > 1 Cyclotron Road, M/S 33R0345 >> >> >> > Berkeley, CA 94720 >> >> >> > Tel: (510) 486-5709 >> >> >> > Fax: (510) 486-5909 >> >> >> > Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… >> >> >> > >> >> >> > >> >> >> > On Fri, Dec 13, 2019 at 5:44 AM Gergely Katona <gkatona(a)gmail.com> >> wrote: >> >> >> >> >> >> >> >> Dear Billy, >> >> >> >> >> >> >> >> This sounds very promising and exciting. I am not sure if cctbx >> is >> >> >> >> already functional as a conda package in anaconda3 (Linux) or >> this is >> >> >> >> still work in progress. My technical expertise does not allow me >> to >> >> >> >> tell the difference. What I tried: >> >> >> >> >> >> >> >> Fresh install of anaconda3. Adding - cctbx and - conda-forge to >> >> >> >> .condarc . Installing pyside2 with conda. Running conda install >> >> >> >> conda_dependencies . I get a lot package version conflict, and I >> >> >> >> cannot import cctbx or iotbx to anaconda python. Am I following >> the >> >> >> >> right instructions? Or it is too early to expect that cctbx >> works when >> >> >> >> installed through conda? >> >> >> >> >> >> >> >> Best wishes, >> >> >> >> >> >> >> >> Gergely >> >> >> >> >> >> >> >> On Wed, Nov 27, 2019 at 3:56 PM Billy Poon <BKPoon(a)lbl.gov> >> wrote: >> >> >> >> > >> >> >> >> > Hi all, >> >> >> >> > >> >> >> >> > For a brief update, I have submitted a recipe for cctbxlite to >> conda-forge (https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_conda-2Dfor… ) >> and support for Python 3.7 and 3.8 is being added ( >> https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_cctbx_cctbx… ). With some fixes for >> Windows (https://urldefense.proofpoint.com/v2/url?u=https-3A__github.com_cctbx_cctbx… ), all platforms >> (macOS, linux, and Windows) can build for Python 2.7, 3.6, 3.7, and 3.8. >> Some additional changes will be needed to get Windows to work with Python 3 >> and for tests to pass with Boost 1.70.0. That will enable the conda-forge >> recipe to build for all platforms and for all supported versions of Python. >> >> >> >> > >> >> >> >> > Currently, the conda-forge recipe will install into the conda >> python and cctbx imports can be done without sourcing the environment >> scripts. It looks like a lot of the environment variables being set in the >> dispatchers can be removed since the Python files and C++ extensions are in >> the right places. I'll update the libtbx_env file so that commands that >> load the environment can work correctly. >> >> >> >> > >> >> >> >> > -- >> >> >> >> > Billy K. Poon >> >> >> >> > Research Scientist, Molecular Biophysics and Integrated >> Bioimaging >> >> >> >> > Lawrence Berkeley National Laboratory >> >> >> >> > 1 Cyclotron Road, M/S 33R0345 >> >> >> >> > Berkeley, CA 94720 >> >> >> >> > Tel: (510) 486-5709 >> >> >> >> > Fax: (510) 486-5909 >> >> >> >> > Web: https://urldefense.proofpoint.com/v2/url?u=https-3A__phenix-2Donline.org&d=… >> >> >> >> > >> >> >> >> > >> >> >> >> > On Sun, Aug 25, 2019 at 2:33 PM Tristan Croll <tic20(a)cam.ac.uk> >> wrote: >> >> >> >> >> >> >> >> >> >> Hi Luc, >> >> >> >> >> >> >> >> >> >> That sounds promising. From there, I?d need to work out how >> to make a fully-packaged installer (basically a modified wheel file) for >> the ChimeraX ToolShed - the aim is for the end user to not have to worry >> about any of this. That adds a couple of complications - e.g. $LIBTBX_BUILD >> would need to be set dynamically before first import - but doesn?t seem >> insurmountable. >> >> >> >> >> >> >> >> >> >> Thanks, >> >> >> >> >> >> >> >> >> >> Tristan >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> Tristan Croll >> >> >> >> >> Research Fellow >> >> >> >> >> Cambridge Institute for Medical Research >> >> >> >> >> University of Cambridge CB2 0XY >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> > On 25 Aug 2019, at 18:31, Luc Bourhis < >> luc_j_bourhis(a)mac.com> wrote: >> >> >> >> >> > >> >> >> >> >> > Hi Tristan, >> >> >> >> >> > >> >> >> >> >> > cctbx could be built to use your ChimeraX python, now that >> cctbx is moving to Python 3. The option ?with-python is there for that with >> the bootstrap script. The specific environment setup boil down to setting >> two environment variable LIBTBX_BUILD and either LD_LIBRARY_PATH on Linux, >> PATH on Win32, or DYLIB_LIBRARY_PATH on MacOS. If you work within a >> framework such as ChimeraX, that should not be difficult to ensure those >> two variables are set. >> >> >> >> >> > >> >> >> >> >> > Best wishes, >> >> >> >> >> > >> >> >> >> >> > Luc >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> >> On 23 Aug 2019, at 19:02, Tristan Croll <tic20(a)cam.ac.uk> >> wrote: >> >> >> >> >> >> >> >> >> >> >> >> To add my two cents on this: probably the second-most >> common question I've had about ISOLDE's implementation is, "why didn't you >> use CCTBX?". The honest answer to that is, "I didn't know how." >> >> >> >> >> >> >> >> >> >> >> >> Still don't, really - although the current developments >> are rather promising. The problem I've faced is that CCTBX was designed as >> its own self-contained Python (2.7, until very recently) environment, with >> its own interpreter and a lot of very specific environment setup. Meanwhile >> I'm developing ISOLDE in ChimeraX, which is *also* its own self-contained >> Python (3.7) environment. To plug one into the other in that form... well, >> I don't think I'm a good enough programmer to really know where to start. >> >> >> >> >> >> >> >> >> >> >> >> The move to Conda and a more modular CCTBX architecture >> should make a lot more possible in that direction. Pip would be even better >> for me personally (ChimeraX can install directly from the PyPI, but doesn't >> interact with Conda) - but I understand pretty well the substantial >> challenge that would amount to (not least being that the PyPI imposes a >> limit - around 100MB from memory? - on the size of an individual package). >> >> >> >> >> >> >> >> >> >> >> >> Best regards, >> >> >> >> >> >> >> >> >> >> >> >> Tristan >> >> >> >> >> >> >> >> >> >> >> >>> On 2019-08-23 09:28, Luc Bourhis wrote: >> >> >> >> >> >>> Hi Graeme, >> >> >> >> >> >>> Yes, I know. But ?black" is a program doing a very >> particular task >> >> >> >> >> >>> (code formatting from the top of my head). Requiring to >> use a wrapper >> >> >> >> >> >>> for python itself is another level. But ok, I think I am >> mellowing to >> >> >> >> >> >>> the idea after all! Talking with people around me, and >> extrapolating, >> >> >> >> >> >>> I would bet that, right now, a great majority of people >> interested by >> >> >> >> >> >>> cctbx in pip have already used the cctbx, so they know >> about the >> >> >> >> >> >>> Python wrapper, and they would not be too sanguine about >> that. My >> >> >> >> >> >>> concern is for the future, when pip will be the first >> time some people >> >> >> >> >> >>> use cctbx. Big fat warning notices on PyPI page and a >> better error >> >> >> >> >> >>> message when cctbx fails because LIBTBX_BUILD is not set >> would be >> >> >> >> >> >>> needed but that could be all right. >> >> >> >> >> >>> If we do a pip installer, we should aim at a minimal >> install: cctbx, >> >> >> >> >> >>> iotbx and their dependencies, and that?s it. >> >> >> >> >> >>> Best wishes, >> >> >> >> >> >>> Luc >> >> >> >> >> >>>> On 23 Aug 2019, at 07:17, Graeme.Winter(a)Diamond.ac.uk < >> Graeme.Winter(a)diamond.ac.uk> wrote: >> >> >> >> >> >>>> Without discussing the merits of this or whether we >> _choose_ to make the move to supporting PIP, I am certain it would be >> _possible_ - many other packages make dispatcher scripts when you pip >> install them e.g. >> >> >> >> >> >>>> Silver-Surfer rescale_f2 :) $ which black; cat $(which >> black) >> >> >> >> >> >>>> >> /Library/Frameworks/Python.framework/Versions/3.6/bin/black >> >> >> >> >> >>>> >> #!/Library/Frameworks/Python.framework/Versions/3.6/bin/python3.6 >> >> >> >> >> >>>> # -*- coding: utf-8 -*- >> >> >> >> >> >>>> import re >> >> >> >> >> >>>> import sys >> >> >> >> >> >>>> from black import main >> >> >> >> >> >>>> if __name__ == '__main__': >> >> >> >> >> >>>> sys.argv[0] = re.sub(r'(-script\.pyw?|\.exe)?$', '', >> sys.argv[0]) >> >> >> >> >> >>>> sys.exit(main()) >> >> >> >> >> >>>> So we _could_ work around the absence of LIBTBX_BUILD >> etc. in the system. Whether or not we elect to do the work is a different >> question, and it seems clear that here are very mixed opinions on this. >> >> >> >> >> >>>> Best wishes Graeme >> >> >> >> >> >>>> On 23 Aug 2019, at 01:21, Luc Bourhis < >> luc_j_bourhis(a)mac.com<mailto:[email protected]>> wrote: >> >> >> >> >> >>>> Hi, >> >> >> >> >> >>>> Even if we managed to ship our the boost dynamic >> libraries with pip, it would still not be pip-like, as we would still need >> our python wrappers to set LIBTBX_BUILD and LD_LIBRARY_PATH. Normal pip >> packages work with the standard python exe. LD_LIBRARY_PATH, we could get >> around that by changing the way we compile, using -Wl,-R, which is the >> runtime equivalent of build time -L. That?s a significant change that would >> need to be tested. But there is no way around setting LIBTBX_BUILD right >> now. Leaving that to the user is horrible. Perhaps there is a way to hack >> libtbx/https://urldefense.proofpoint.com/v2/url?u=http-3A__env-5Fconfig.py&… so that we can hardwire LIBTBX_BUILD in there when pip >> installs? >> >> >> >> >> >>>> Best wishes, >> >> >> >> >> >>>> Luc >> >> >> >> >> >>>> On 16 Aug 2019, at 22:47, Luc Bourhis < >> luc_j_bourhis(a)mac.com<mailto:[email protected]>> wrote: >> >> >> >> >> >>>> Hi, >> >> >> >> >> >>>> I did look into that many years ago, and even toyed with >> building a pip installer. What stopped me is the exact conclusion you >> reached too: the user would not have the pip experience he expects. You are >> right that it is a lot of effort but is it worth it? Considering that >> remark, I don?t think so. Now, Conda was created specifically to go beyond >> pip pure-python-only support. Since cctbx has garnered support for Conda, >> the best avenue imho is to go the extra length to have a package on >> https://urldefense.proofpoint.com/v2/url?u=http-3A__Anaconda.org&d=DwICAg&c… <https://urldefense.proofpoint.com/v2/url?u=http-3A__anaconda.org_&d=DwICAg&… >, and then to advertise it hard to >> every potential user out there. >> >> >> >> >> >>>> Best wishes, >> >> >> >> >> >>>> Luc >> >> >> >> >> >>>> On 16 Aug 2019, at 21:45, Aaron Brewster < >> asbrewster(a)lbl.gov<mailto:[email protected]>> wrote: >> >> >> >> >> >>>> Hi, to avoid clouding Dorothee's documentation email >> thread, which I think is a highly useful enterprise, here's some thoughts >> about putting cctbx into pip. Pip doesn't install non-python dependencies >> well. I don't think boost is available as a package on pip (at least the >> package version we use). wxPython4 isn't portable through pip ( >> https://urldefense.proofpoint.com/v2/url?u=https-3A__wiki.wxpython.org_How-… ). >> MPI libraries are system dependent. If cctbx were a pure python package, >> pip would be fine, but cctbx is not. >> >> >> >> >> >>>> All that said, we could build a manylinux1 version of >> cctbx and upload it to PyPi (I'm just learning about this). For a pip >> package to be portable (which is a requirement for cctbx), it needs to >> conform to PEP513, the manylinux1 standard ( >> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.python.org_dev_pep… ). For example, numpy is built >> according to this standard (see https://urldefense.proofpoint.com/v2/url?u=https-3A__pypi.org_project_numpy… , >> where you'll see the manylinux1 wheel). Note, the manylinux1 standard is >> built with Centos 5.11 which we no longer support. >> >> >> >> >> >>>> There is also a manylinux2010 standard, which is based >> on Centos 6 (https://urldefense.proofpoint.com/v2/url?u=https-3A__www.python.org_dev_pep… ). This is likely >> a more attainable target (note though by default C++11 is not supported on >> Centos 6). >> >> >> >> >> >>>> If we built a manylinuxX version of cctbx and uploaded >> it to PyPi, the user would need all the non-python dependencies. There's >> no way to specify these in pip. For example, cctbx requires boost 1.63 or >> better. The user will need to have it in a place their python can find it, >> or we could package it ourselves and supply it, similar to how the pip h5py >> package now comes with an hd5f library, or how the pip numpy package >> includes an openblas library. We'd have to do the same for any packages we >> depend on that aren't on pip using the manylinux standards, such as >> wxPython4. >> >> >> >> >> >>>> Further, we need to think about how dials and other >> cctbx-based packages interact. If pip install cctbx is set up, how does >> pip install dials work, such that any dials shared libraries can find the >> cctbx libraries? Can shared libraries from one pip package link against >> libraries in another pip package? Would each package need to supply its >> own boost? Possibly this is well understood in the pip field, but not by >> me :) >> >> >> >> >> >>>> Finally, there's the option of providing a source pip >> package. This would require the full compiler toolchain for any given >> platform (macOS, linux, windows). These are likely available for >> developers, but not for general users. >> >> >> >> >> >>>> Anyway, these are some of the obstacles. Not saying it >> isn't possible, it's just a lot of effort. >> >> >> >> >> >>>> Thanks, >> >> >> >> >> >>>> -Aaron >> >> >> >> >> >>>> _______________________________________________ >> >> >> >> >> >>>> cctbxbb mailing list >> >> >> >> >> >>>> cctbxbb(a)phenix-online.org<mailto: >> cctbxbb(a)phenix-online.org> >> >> >> >> >> >>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >>>> _______________________________________________ >> >> >> >> >> >>>> cctbxbb mailing list >> >> >> >> >> >>>> cctbxbb(a)phenix-online.org<mailto: >> cctbxbb(a)phenix-online.org> >> >> >> >> >> >>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >>>> _______________________________________________ >> >> >> >> >> >>>> cctbxbb mailing list >> >> >> >> >> >>>> cctbxbb(a)phenix-online.org<mailto: >> cctbxbb(a)phenix-online.org> >> >> >> >> >> >>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >>>> -- >> >> >> >> >> >>>> This e-mail and any attachments may contain >> confidential, copyright and or privileged material, and are for the use of >> the intended addressee only. If you are not the intended addressee or an >> authorised recipient of the addressee please notify us of receipt by >> returning the e-mail and do not use, copy, retain, distribute or disclose >> the information in or attached to the e-mail. >> >> >> >> >> >>>> Any opinions expressed within this e-mail are those of >> the individual and not necessarily of Diamond Light Source Ltd. >> >> >> >> >> >>>> Diamond Light Source Ltd. cannot guarantee that this >> e-mail or any attachments are free from viruses and we cannot accept >> liability for any damage which you may sustain as a result of software >> viruses which may be transmitted in or with the message. >> >> >> >> >> >>>> Diamond Light Source Limited (company no. 4375679). >> Registered in England and Wales with its registered office at Diamond >> House, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 >> 0DE, United Kingdom >> >> >> >> >> >>>> _______________________________________________ >> >> >> >> >> >>>> cctbxbb mailing list >> >> >> >> >> >>>> cctbxbb(a)phenix-online.org >> >> >> >> >> >>>> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >>> _______________________________________________ >> >> >> >> >> >>> cctbxbb mailing list >> >> >> >> >> >>> cctbxbb(a)phenix-online.org >> >> >> >> >> >>> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> >> cctbxbb mailing list >> >> >> >> >> >> cctbxbb(a)phenix-online.org >> >> >> >> >> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> > >> >> >> >> >> > >> >> >> >> >> > _______________________________________________ >> >> >> >> >> > cctbxbb mailing list >> >> >> >> >> > cctbxbb(a)phenix-online.org >> >> >> >> >> > https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> >> cctbxbb mailing list >> >> >> >> >> cctbxbb(a)phenix-online.org >> >> >> >> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> > >> >> >> >> > _______________________________________________ >> >> >> >> > cctbxbb mailing list >> >> >> >> > cctbxbb(a)phenix-online.org >> >> >> >> > https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> >> Gergely Katona, PhD >> >> >> >> Associate Professor >> >> >> >> Department of Chemistry and Molecular Biology, University of >> Gothenburg >> >> >> >> Box 462, 40530 G?teborg, Sweden >> >> >> >> Tel: +46-31-786-3959 / M: +46-70-912-3309 / Fax: +46-31-786-3910 >> >> >> >> Web: https://urldefense.proofpoint.com/v2/url?u=http-3A__katonalab.eu&d=DwICAg&c… , Email: gergely.katona(a)gu.se >> >> >> >> >> >> >> >> _______________________________________________ >> >> >> >> cctbxbb mailing list >> >> >> >> cctbxbb(a)phenix-online.org >> >> >> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> > >> >> >> > _______________________________________________ >> >> >> > cctbxbb mailing list >> >> >> > cctbxbb(a)phenix-online.org >> >> >> > https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >> >> >> >> >> >> >> -- >> >> >> Gergely Katona, PhD >> >> >> Associate Professor >> >> >> Department of Chemistry and Molecular Biology, University of >> Gothenburg >> >> >> Box 462, 40530 G?teborg, Sweden >> >> >> Tel: +46-31-786-3959 / M: +46-70-912-3309 / Fax: +46-31-786-3910 >> >> >> Web: https://urldefense.proofpoint.com/v2/url?u=http-3A__katonalab.eu&d=DwICAg&c… , Email: gergely.katona(a)gu.se >> >> >> >> >> >> _______________________________________________ >> >> >> cctbxbb mailing list >> >> >> cctbxbb(a)phenix-online.org >> >> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> > >> >> > _______________________________________________ >> >> > cctbxbb mailing list >> >> > cctbxbb(a)phenix-online.org >> >> > https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> >> >> >> >> -- >> >> Gergely Katona, PhD >> >> Associate Professor >> >> Department of Chemistry and Molecular Biology, University of Gothenburg >> >> Box 462, 40530 G?teborg, Sweden >> >> Tel: +46-31-786-3959 / M: +46-70-912-3309 / Fax: +46-31-786-3910 >> >> Web: https://urldefense.proofpoint.com/v2/url?u=http-3A__katonalab.eu&d=DwICAg&c… , Email: gergely.katona(a)gu.se >> >> >> >> _______________________________________________ >> >> cctbxbb mailing list >> >> cctbxbb(a)phenix-online.org >> >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> > >> > _______________________________________________ >> > cctbxbb mailing list >> > cctbxbb(a)phenix-online.org >> > https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >> >> >> -- >> Gergely Katona, PhD >> Associate Professor >> Department of Chemistry and Molecular Biology, University of Gothenburg >> Box 462, 40530 G?teborg, Sweden >> Tel: +46-31-786-3959 / M: +46-70-912-3309 / Fax: +46-31-786-3910 >> Web: https://urldefense.proofpoint.com/v2/url?u=http-3A__katonalab.eu&d=DwICAg&c… , Email: gergely.katona(a)gu.se >> >> _______________________________________________ >> cctbxbb mailing list >> cctbxbb(a)phenix-online.org >> https://urldefense.proofpoint.com/v2/url?u=http-3A__phenix-2Donline.org_mai… >> >

1 0

Emergency power test at Berkeley this weekend (12/13-12/16)
by Billy Poon 17 Dec '19

17 Dec '19

Hi everyone, To mitigate disruptions from future power shut offs due to wildfire concerns, we are performing an emergency power test for our web servers. This will affect the phenix-online.org and cci.lbl.gov servers. The websites, mailing lists, and repositories will remain available, but the servers will be running on emergency power instead. The servers will be switched to emergency power at around 2 pm Pacific time on Friday (12/13) and switched back to main power around 10 am Pacific time on Monday (12/16). Please let me know if you experience any issues. Thanks! -- Billy K. Poon Research Scientist, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory 1 Cyclotron Road, M/S 33R0345 Berkeley, CA 94720 Tel: (510) 486-5709 Fax: (510) 486-5909 Web: https://phenix-online.org

3 4