August 2009 - phenixbb - phenix-online.org

Re: [phenixbb] phenix.refine 1.3 vs. 1.4 map quality ?
by William G. Scott 07 Aug '09

07 Aug '09

Hi Paul et al: The yellow map is filled and the blue map is no-fill from the phenix- generated mtz file: http://sage.ucsc.edu/~wgscott/mystuff/filled_vs_unfilled.pdf So I think this is clearly what is going on. Thanks. Bill

1 0

Segmentation Fault
by Waight, Andrew 07 Aug '09

07 Aug '09

Hello All, I've recently solved a membrane protein structure largely with the help of phenix refine. I also have been using the autobuild programs recently for ligand fitting and whatnot. The program during this time has been running flawlessly on my machine (Ubuntu 9.04 E8400 3.0ghz etc etc) However this weekend Autobuild and AutoMR spontaneously started throwing this error. (boost_adaptbx_segmentation_fault_backtrace+0x1f) [0xb7de2e27] Segmentation fault (Python and libc call stacks above) This crash may be due to a problem in any imported Python module, including modules which are not part of the cctbx project. To disable the traps leading to this message, define these environment variables (e.g. assign the value 1): BOOST_ADAPTBX_FPE_DEFAULT BOOST_ADAPTBX_SIGNALS_DEFAULT This will NOT solve the problem, just mask it, but may allow you to proceed in case it is not critical. Memtest 86 says my RAM is good. I have reinstalled phenix and am still getting the same error. I can't seem to find any other information on this error (segmentation faults are tricky I know) and am just wondering if anyone else has seen or solved this type of problem, thanks for your help. Andrew Waight Wang Lab Skirball Institute of Biomolecular Medicine NYU school of medicine </PRE> <html> <body> ------------------------------------------------------------<br /> This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain information that is proprietary, confidential, and exempt from disclosure under applicable law. Any unauthorized review, use, disclosure, or distribution is prohibited. If you have received this email in error please notify the sender by return email and delete the original message. Please note, the recipient should check this email and any attachments for the presence of viruses. The organization accepts no liability for any damage caused by any virus transmitted by this email.<br /> ================================= </body> </html> <PRE>

3 3

Re: [phenixbb] Autobuild error
by youssef ben ammar 06 Aug '09

06 Aug '09

Thanks for your quick reply, I tried again to fix the problem as suggested by Thomas but this did not solve the problem. Actually I have two machines running phenix, one with the old version 1.3, and the other with 1.4-3 version. With the old version I have also coot, ccp4, and arp-warp, and all things are running without any problem in this machine. But in the other computer, I don't have arp-warp in it (ccp4 and coot exist also), and everything was running OK until I updated phenix to 1.4-3. But now even if I downgrade it to 1.3, autobuild does not work. If I compare echo $PATH results from both machines, I can notice that the path in the one with "defected" autobuild is too long. I will review again my path and try to fix it, or see if there are other recently-installed programs that interfere with phenix. Thanks Youssef.

2 1

Autobuild error -
by Gino Cingolani 06 Aug '09

06 Aug '09

Dear Youssef and Tom, I had the same problem. I also emailed the Phenix classified and got a similar response from Tom. In reality, Tom suggestion didn't solve my problem. The funny thing is that in my case PHENIX.Autobuild worked fine for months before suddenly giving the 'Word too long' error. Weird!!! Believe it or not, the only thing I had to do to fix the problem was to uninstall the ARP/wARP package (sorry about that Tassos!). I realized that PHENIX.Autobuilt stopped working properly right when I installed ARP/wARP. I guess there may be a conflict between the two programs (could Phenix read some ARP/wARP library in the wrong directory?), or something like that. I'm not sure. I'm not claiming this is a general solution, but it worked in my case. I hope it will help you! Cheers, Gino ****************************************************************************** Gino Cingolani, Ph.D. Associate Professor Thomas Jefferson University Dept. of Biochemistry & Molecular Biology 233 South 10th Street - Room 826 Philadelphia PA 19107 Office (215) 503 4573 Lab (215) 503 4595 Fax (215) 923 2117 E-mail: gino.cingolani(a)jefferson.edu ****************************************************************************** "Nati non foste per viver come bruti, ma per seguir virtute e conoscenza" ("You were not born to live like brutes, but to follow virtue and knowledge") Dante, The Divine Comedy (Inferno, XXVI, vv. 119-120)

3 2

Re: [phenixbb] Autobuild error
by Thomas C. Terwilliger 05 Aug '09

05 Aug '09

Hi Youssef, I'm sorry for the trouble! If you update to a recent "nightly build" such as 1.4-129 then this should go away. If it still doesn't, then have a look at your path: echo $PATH which is probably quite long....and identify a few things (perhaps ccp4 and coot for example) that you don't need while running phenix...and then add the keyword: remove_path_word_list="coot ccp4" All the best, Tom T remove_path_word_list = None .help = "List of words identifying paths to remove from PATH " "These can be used to shorten your PATH. For example..." "cns ccp4 coot would remove all paths containing these " "words except those also containing phenix. Capitalization" "is ignored." ">> Dear all, >> >> Recently I have problem with Autobuild. The process fails with the >> following >> message: >> Failed to carry out AutoBuild_build_cycle: >> child process stderr output: >> command: 'csh /home/phenix/p21/AutoBuild_run_1_/TEMP0/RUN_FILE_1' >> Word too long. >> Even if I set the path only to things related to phenix, the process fails >> with the same error. >> >> Any idea? >> >> Youssef >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://www.phenix-online.org/mailman/listinfo/phenixbb >>

1 0

Autobuild error
by youssef ben ammar 05 Aug '09

05 Aug '09

Dear all, Recently I have problem with Autobuild. The process fails with the following message: Failed to carry out AutoBuild_build_cycle: child process stderr output: command: 'csh /home/phenix/p21/AutoBuild_run_1_/TEMP0/RUN_FILE_1' Word too long. Even if I set the path only to things related to phenix, the process fails with the same error. Any idea? Youssef

1 0

Using phenix.pdbtools to strip multiple conformations out of a PDB file?
by Stephen Graham 04 Aug '09

04 Aug '09

Dear all, Apologies if this is a dumb question, but I couldn't find the answer in the docs or by asking the googlebrain. Is there a simple way in phenix.pdbtools to strip "alternate conformations" of side chains, etc, from an input PDB file? By removing "alternate conformations" I mean I would like to keep the conformation with the highest occupancy (not necessarily denoted 'A' in the altLoc column) unless all conformations have an equal occupancy, in which case I'd arbitrarily keep conformation 'A'. I think it should be possible by a clever atom_selection command, but the correct syntax has thus-far eluded me! Thanks, Stephen -- Dr Stephen Graham Division of Structural Biology Wellcome Trust Centre for Human Genetics Roosevelt Drive Oxford OX3 7BN United Kingdom Phone: +44 1865 287 549

2 1

Is the twin refine conflict with order_solvent refine
by shi jiahai 04 Aug '09

04 Aug '09

Hi, Dear all, I am refine a twin dataset with phenix 1.4-3 and CCI (2008_02_08_1610) on a CenOS 5.2 workstation. When I run refine with twin law or order_solvent alone, the refinement is good. Everything goes smoothly. However if I enable refinement on both twin law and order_solvent, the error comes during the order_solvent refinement as below. Start model: number = 55 b_iso_min = 5.52 (limit = 1.00) b_iso_max = 60.32 (limit = 60.00) b_iso_mean = 24.19 anisotropy_min = 1.00 (limit = 0.10) occupancy_min = 1.00 (limit = 0.10) occupancy_max = 1.00 (limit = 1.20) dist_sol_mol_min = 2.13 (limit = 1.80) dist_sol_mol_max = 4.38 (limit = 6.00) Traceback (most recent call last): File "/Application/CCI/cci_apps_sources/phenix/phenix/command_line/refine.py", line 5, in <module> command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/Application/CCI/cci_apps_sources/phenix/phenix/refinement/command_line.py", line 80, in run call_back_after_monitor_collect=call_back_after_monitor_collect) File "/Application/CCI/cci_apps_sources/phenix/phenix/refinement/driver.py", line 1162, in run call_back_after_monitor_collect = call_back_after_monitor_collect) File "/Application/CCI/cci_apps_sources/phenix/phenix/refinement/strategies.py", line 350, in refinement_machine log = log) File "/Application/CCI/cci_apps_sources/mmtbx/mmtbx/solvent/ordered_solvent.py", line 132, in __init__ map_cutoff = self.params.primary_map_cutoff).peaks_mapped() File "/Application/CCI/cci_apps_sources/mmtbx/mmtbx/solvent/ordered_solvent.py", line 324, in find_peaks log = self.log) File "/Application/CCI/cci_apps_sources/mmtbx/mmtbx/find_peaks.py", line 65, in __init__ symmetry_flags = maptbx.use_space_group_symmetry) File "/Application/CCI/cci_apps_sources/mmtbx/mmtbx/twinning/twin_f_model.py", line 2238, in electron_density_map w2 = w2).fft_map( File "/Application/CCI/cci_apps_sources/mmtbx/mmtbx/twinning/twin_f_model.py", line 2126, in map_coefficients "m_gradient" AssertionError Can anybody help me with this? Thanks a lot in advance! Best Regards, Shi Jiahai Department of Biological Sciences, National University of Singapore

2 1

Assertion error while adding water
by Bishal Kumar Singh 03 Aug '09

03 Aug '09

Hi, Following error is showing while adding water. Every command-line is as default except "ordered_solvent = True". I will appreciate your suggestions. "0.7 1.17367178905 0.7 1.2044634853 0.7 1.18455476555 0.7 1.21102571346 0.7 1.20890773595 0.7 1.23028004675 0.7 1.2017635385 0.7 1.2151128962 0.7 1.20672093638 0.7 1.17881942233 0.7 1.21258440895 0.7 1.21100112067 0.7 1.22101928156 0.7 1.20955876073 0.7 1.17722437184 0.7 1.19891104532 0.7 1.18433797592 Traceback (most recent call last): File "/wrkhuge/cci_apps/cci_apps_sources/phenix/phenix/command_line/refine.py", line 16, in <module> command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/wrkhuge/cci_apps/cci_apps_sources/phenix/phenix/refinement/command_line.py", line 89, in run call_back_after_monitor_collect=call_back_after_monitor_collect) File "/wrkhuge/cci_apps/cci_apps_sources/phenix/phenix/refinement/driver.py", line 1121, in run call_back_after_monitor_collect = call_back_after_monitor_collect) File "/wrkhuge/cci_apps/cci_apps_sources/phenix/phenix/refinement/strategies.py", line 394, in refinement_machine log = log) File "/wrkhuge/cci_apps/cci_apps_sources/mmtbx/solvent/ordered_solvent.py", line 159, in __init__ use_kick_map = self.params.use_kick_maps).peaks_mapped() File "/wrkhuge/cci_apps/cci_apps_sources/mmtbx/solvent/ordered_solvent.py", line 334, in find_peaks log = self.log) File "/wrkhuge/cci_apps/cci_apps_sources/mmtbx/find_peaks.py", line 93, in __init__ crystal_gridding_tags = fft_map.tags() File "/wrkhuge/cci_apps/cci_apps_sources/cctbx/maptbx/__init__.py", line 152, in tags return crystal_gridding_tags(self) File "/wrkhuge/cci_apps/cci_apps_sources/cctbx/maptbx/__init__.py", line 158, in __init__ assert gridding.symmetry_flags() is not None" regards, Bishal Singh

3 2