January 2015 - phenixbb - phenix-online.org

Old Phenix jobs
by Mark A Saper 27 Jan '15

27 Jan '15

I was looking at some old Phenix GUI jobs run in Sept 2010 with Phenix version 1.6.4. Can these jobs be opened with the current (dev-1932) GUI ? When I try to restore a refinement job opens, a window opens with the parameters used for the job, but no tab with the results. When I try to restore other jobs, I receive an error when trying to open them: “UnicodeDecodeError : ‘utf8’ codec can’t decode byte 0x81 in position 35: invalid start byte”. Another thing I noticed about some of these jobs was that there are *.libtbx_info files in the phenix/tmp subdirectorty that are >100 Mbytes, even one that is 1.2 Gbytes! Can these files be deleted. I only see such large files for one particular structure. Any info about this would be helpful. Mark _______________________________________________ Mark A. Saper, Ph.D. Associate Professor of Biological Chemistry, U-M Medical School 3040 Chemistry Building | saper(a)umich.edu | +1 (734) 764-3353

2 1

R/ R free (overall) and R/Rfree (for highest resolution shell)
by George Devaniranjan 27 Jan '15

27 Jan '15

Hi, I calculated/validated several PDB structures in Phenix.Validation (GUI) The R/R-free (overall) is 0.1271/0.1348 Further down I looked at the R/R-free for the highest resolution shell. Its 0.2538/0.2446 I am curious why the R-free for the *highest resolution shell* seems to be LOWER than R (work). Am I reading the information wrong? PDB: 3QL9 Thank you, George

4 5

Re: [phenixbb] phenixbb Digest, Vol 110, Issue 12
by Kay Diederichs 25 Jan '15

25 Jan '15

Patrick, see my posting at https://www.jiscmail.ac.uk/cgi-bin/webadmin?A2=ccp4bb;f6735c0c.1501 . The "Advanced Search" interface of the RCSB also lets you search for resolution range and many other criteria. "Text search" won't help you much if you are searching specific numeric values, I guess. best, Kay Am 25.01.15 um 09:21 schrieb phenixbb-request(a)phenix-online.org: > Date: Sat, 24 Jan 2015 09:41:36 -0800 > From: Patrick <patrick.cossins(a)inbox.com> > To: PHENIX list <phenixbb(a)phenix-online.org>, ccp4bb(a)jiscmail.ac.uk > Subject: [phenixbb] extracting PHENIX structures > Message-ID: <5D1147D5283.0000050Apatrick.cossins(a)inbox.com> > Content-Type: text/plain; charset=US-ASCII > > Hi, > > not directly related but I wanted to know how to extract from the PDB all the PHENIX/CCP4 refined structures currently deposited. > > Do I use the "text" search in quarry to get the result or do I use the software? > > I tried it for both but seems to give different results (no's). > > I tried for another refinement package (shelx) and same, different no's > > Using software, and looking for contains 320 > > using text search 130 > > Is there another way to get structure of a certain resolution ? > > Patrick

1 0

extracting PHENIX structures
by Patrick 24 Jan '15

24 Jan '15

Hi, not directly related but I wanted to know how to extract from the PDB all the PHENIX/CCP4 refined structures currently deposited. Do I use the "text" search in quarry to get the result or do I use the software? I tried it for both but seems to give different results (no's). I tried for another refinement package (shelx) and same, different no's Using software, and looking for contains 320 using text search 130 Is there another way to get structure of a certain resolution ? Patrick ____________________________________________________________ Can't remember your password? Do you need a strong and secure password? Use Password manager! It stores your passwords & protects your account. Check it out at http://mysecurelogon.com/password-manager

1 0

Crystallography Workshop in South America - CCP4 / Institut Pasteur de Montevideo 2015
by Alejandro Buschiazzo 24 Jan '15

24 Jan '15

Dear colleagues, We wish to remind you about the upcoming Workshop: Macromolecular Crystallography School "From data processing to structure refinement and beyond", to be held at the Institut Pasteur de Montevideo (Uruguay). Dates: April 6 - 16, 2015 Invited speakers and tutors: Alejandro Buschiazzo, Montevideo, Uruguay Kay Diederichs, Konstanz, Germany Paul Emsley, Cambridge, UK Richard Garrat, São Carlos, Brazil Ronan Keegan, Oxford, UK Eugene Krissinel, Oxford, UK Victor Lamzin, Hamburg, Germany Andrey Lebedev, Oxford, UK Andrew Leslie, Cambridge, UK Garib Murshudov, Cambridge, UK Rob Nicholls, Cambridge, UK Randy Read, Cambridge, UK William Shepard, Paris, France Pavol Skubak, Leiden, the Netherlands Clemens Vonrhein, Cambridge, UK This edition will count with an optional introductory day. A Scientific Satellite Symposium will take place during the course. Sponsored by the Insttitut Pasteur and the Institut Pasteur International Network, this symposium will gather top research scientists from the Pasteur Network, who will discuss about Structural Biology in the study of infectious diseases: Pedro Alzari and Michael Nilges (Inst Pasteur, Paris), Beatriz Guimaraes (Fiocruz, Parana) and Joo Hwan No (Inst Pasteur, Korea), together with several scientists from Inst Pasteur Montevideo. Please find the program of the Workshop and Satellite Symposium, the application form and further contact information, at www.pasteur.edu.uy/mx2015 <http://www.pasteur.edu.uy/mx2015> The site will be updated regularly, stay tuned. We acknowledge the support from the Reseau International des Instituts Pasteur (RIIP); the Collaborative Computational Project Nº4 (CCP4, UK) & Science and Technology Facilities Council (UK); the International Union of Crystallography (IUCr); and the Institut Pasteur de Montevideo. Applicants: 24 students will be selected, aiming at advanced PhD, postdocs and young researchers. The Course will provide financial support covering registration fees, and for the case of those students coming from abroad, all local expenses (lodging, per diem and local transportation). Look in the www site <http://www.pasteur.edu.uy/mx2015> for details on application procedures. The application deadline is February 16, 2015. The results will be announced by March 6. Please address further inquiries to: mx2015(a)pasteur.edu.uy <mailto:[email protected]> Organizers: Alejandro Buschiazzo, PhD. Institut Pasteur de Montevideo, Uruguay Ronan Keegan, PhD. CCP4, STFC Rutherford Appleton Laboratory, United Kingdom We look forward to welcoming you soon in Montevideo! -- Alejandro Buschiazzo, PhD Research Scientist Unit of Protein Crystallography Institut Pasteur de Montevideo Mataojo 2020 Montevideo 11400 URUGUAY Phone: +598 25220910 int. 120 Fax: +598 25224185 http://www.pasteur.edu.uy/pxf

1 0

Problem during refinement
by Almudena Ponce Salvatierra 24 Jan '15

24 Jan '15

Dear all, I have partially rebuilt my model after autosol and now I would like to submit it for refinement to Phenix refine. However when I do so, even though the R factors go down when I have a look at the result, it just looks awful! All the model is placed out of the electron density map, plus the electron density map doesn't look anymore like a 3 A one, but just like sausages. Why is this happening? The truth is I have no idea... What I do is to provide Phenix refine with overall_best_refine_data.mtz (coming from autosol) as phases, x Ray data and x Ray r free data. Additionally, the starting model and the sequence. Any suggestions are more than welcome. Thanks a lot in advance. Best wishes, Almudena -- Almudena Ponce-Salvatierra Macromolecular crystallography and Nucleic acid chemistry Max Planck Institute for Biophysical Chemistry Am Fassberg 11 37077 Göttingen Germany

2 1

resolve phases/fom
by "Weiergräber, Oliver H." 24 Jan '15

24 Jan '15

Hello, while compiling phasing stats for a manuscript, I came around the following question: Having run autosol (on a SAD dataset) from the command line, where to find the latest density-modified phases (with associated FOMs) _before_ the onset of model building? The PHIM and FOMM columns in the denmod_i.mtz files are obvious candidates - just want to be sure since this particular FOM does not seem to be echoed in the log files, as far as I can see. Best regards Oliver ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------ Forschungszentrum Juelich GmbH 52425 Juelich Sitz der Gesellschaft: Juelich Eingetragen im Handelsregister des Amtsgerichts Dueren Nr. HR B 3498 Vorsitzender des Aufsichtsrats: MinDir Dr. Karl Eugen Huthmacher Geschaeftsfuehrung: Prof. Dr.-Ing. Wolfgang Marquardt (Vorsitzender), Karsten Beneke (stellv. Vorsitzender), Prof. Dr.-Ing. Harald Bolt, Prof. Dr. Sebastian M. Schmidt ------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------

2 1

Reflection file editor. copying Free set from one to other mtz.
by Tarek DawoD 23 Jan '15

23 Jan '15

Unfortunately i did not find a detailed explanation for how to use reflection file editor (GUI) i just want to know if i am right and i have a questions about how it works as well 1- if i have 2 myfile-data.mtz files (for the same structure but 2 different ligands, one of them 1.9 A and the other 1.6 A) and i want to copy free set from one to the other. so i have in the (ALL Input Arrays) 2 intensity and 2 R-free flag. so what i did is to add in the (output array) one of the intensity which belongs to one and one R flag which belong to other. i was not sure how to use the other output options??? what should i check or uncheck in this particular case??? 2- How this works? suppose i have h k l (6 7 21) has flag 1 in the data.mtz file (the one i used to copy the free set to other mtz), if i will copy this to other mtz (which has no R flag of course), the program will look for (6 7 21) h k l in the other mtz to give it also flag 1. Am i right.??? 3- if i am right in number 2, Suppose the other mtz has no (6 7 21) h k l what will happen? if it is just ignoring it or assign flag 1 for other h k l which did not exist in the first data.mtz.this means it is impossible to get 100% free set similar between say the 2 mtz files in this case. thank you in advance thank you Dr Pavel and Dr Georg for your reply to my previous query TK DawoD

2 1

Solving installation problems on network volumes in Yosemite
by Chris Richardson 23 Jan '15

23 Jan '15

I thought I’d post this in case anyone has a similar problem in the future. It’s taken me a couple of days of frustration to find the solution; maybe I can save someone else some pain. This problem only occurs when trying to install Phenix on an NFS-mounted volume in OS X 10.x, Yosemite. If this doesn’t apply to you (and I might be the only person doing this), you can happily ignore what follows. The problem: In an effort to save us from malware, OS X now adds a ‘quarantine’ attribute to downloaded files. This includes tar and compressed tar files. For most users the quarantine flag only really comes into play if the downloaded file is an application or installer package. When Yosemite untars an archive with the quarantine attribute, it adds the quarantine attribute to every file it extracts from the archive. This doesn’t present a problem if you’re extracting the archive to a local disk, or an AFP-mounted network volume. If you’re extracting the archive to an NFS-mounted network volume, it can’t store the quarantine flag as a resource fork on the file itself. Instead, it creates a ._<filename> file for each extracted file. The Phenix installer doesn’t like having an install tree full of unexpected ._ files. In some cases, such as where generate_henke_cpp.py tries to generate tables from all the files in a directory, it tries to read ._ files as normal files and dies. The solution: The solution is trivial once you know what the problem is. Remove the quarantine attribute from the tar file before extracting its contents. For example: xattr -d com.apple.quarantine phenix-installer-1.9-1692-mac-intel-osx-x86_64.tar.gz Of course, if the Phenix installer could be modified so that it doesn’t die when it finds unexpected ._ files, that would be lovely. Chris -- Dr Chris Richardson :: Sysadmin, structural biology, icr.ac.uk The Institute of Cancer Research: Royal Cancer Hospital, a charitable Company Limited by Guarantee, Registered in England under Company No. 534147 with its Registered Office at 123 Old Brompton Road, London SW7 3RP. This e-mail message is confidential and for use by the addressee only. If the message is received by anyone other than the addressee, please return the message to the sender by replying to it and then delete the message from your computer and network.

1 0

Rfree % calculation
by Tarek DawoD 22 Jan '15

22 Jan '15

Dear ALL when you start you refinment in phenix with ***.sca file, fraction of reflection in test set will be created. under options (bottom) in phenix refine, you could see that fraction of reflection in test set is 0.1 which means 10 %by looking to the PDB header for completely different structures (below) you will find different percentage but always FREE R VALUE TEST SET COUNT is around 3800. so it always take the same 3800 count regardless the number of reflections. when you look in generated mtz file after the refinment, you see under R-free-flags(+) and R-free-flags(-) either 0 or 1. what does 0 or 1 mean? thank you in advance for explaination. TKDawoD ----------------------------------------------------------------------------------------------------REMARK 3 NUMBER OF REFLECTIONS : 47312 REMARK 3 NUMBER OF REFLECTIONS (NON-ANOMALOUS) : 24389 REMARK 3 REMARK 3 FIT TO DATA USED IN REFINEMENT.REMARK 3 R VALUE (WORKING + TEST SET) : 0.1673REMARK 3 R VALUE (WORKING SET) : 0.1636REMARK 3 FREE R VALUE : 0.2084REMARK 3 FREE R VALUE TEST SET SIZE (%) : 8.21 REMARK 3 FREE R VALUE TEST SET COUNT : 3882------------------------------------------------------------------------------------------------------REMARK 3 NUMBER OF REFLECTIONS : 107005 REMARK 3 NUMBER OF REFLECTIONS (NON-ANOMALOUS) : 56251 REMARK 3 REMARK 3 FIT TO DATA USED IN REFINEMENT.REMARK 3 R VALUE (WORKING + TEST SET) : 0.1457REMARK 3 R VALUE (WORKING SET) : 0.15.34REMARK 3 FREE R VALUE : 0.1997REMARK 3 FREE R VALUE TEST SET SIZE (%) : 3.51 REMARK 3 FREE R VALUE TEST SET COUNT : 3809-----------------------------------------------------------------------------------------------------NUMBER OF REFLECTIONS : 48150 REMARK 3 NUMBER OF REFLECTIONS (NON-ANOMALOUS) : 25296 REMARK 3 REMARK 3 FIT TO DATA USED IN REFINEMENT.REMARK 3 R VALUE (WORKING + TEST SET) : 0.1507REMARK 3 R VALUE (WORKING SET) : 0.1470REMARK 3 FREE R VALUE : 0.1918REMARK 3 FREE R VALUE TEST SET SIZE (%) : 7.98 REMARK 3 FREE R VALUE TEST SET COUNT : 3841

3 3