January 2018 - phenixbb - phenix-online.org

Calculate F/sigma(F)
by Cygler, Miroslaw 19 Jan '18

19 Jan '18

Hi, I would like to calculate distribution of F/sigma(F) as a function of resolution for reflections in an mtz file. Is it possible to do it Phenix? Thanks, Mirek

2 1

Re: [phenixbb] Fourier_shell_correlation_(FSC)_in_cryo-EM_refinement
by Takanori Nakane 19 Jan '18

19 Jan '18

Hi Oleg, Do you mean FSC between a model and a map? You can calculate it with phenix.model_vs_map. Best regards, Takanori Nakane > I started to do some refinements of cryo-EM structures. But I could not > find FSC (e.g. FSC average) quality metrics in the refinement log. Is it > because of the real space refinement methodology or some features need to > be activated? Please advise > Thanks > Oleg ? > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org

3 4

Local sharpening error
by Ricardo Righetto 18 Jan '18

18 Jan '18

Hi, I am trying to do local sharpening with phenix.auto_sharpen, with the following command: phenix.auto_sharpen map.mrc resolution=4.0 local_sharpening=True Then it runs the global sharpening first as expected, but when it gets to the local sharpening it crashes with the following error: Sorry: Please specify a sequence file with seq_file=myseq.seq Nowhere it says that I would need a .seq file in order to do local sharpening (global sharpening works fine). Any ideas? Thanks, -- Ricardo Diogo Righetto

2 5

Autobuild in to "extra density"
by Tom Terwilliger 18 Jan '18

18 Jan '18

Hi Ben, I think you've done the hard part already by building a poly-ala model into your extra density! If you want to try and sequence it using the density, you can use phenix.replace_side_chains with the keyword "sequence_from_density=True" to do this. See: https://www.phenix-online.org/documentation/ reference/replace_side_chains.html To use autobuild with this, add an extra line to your sequence file with the sequence of the extra piece (separate it from the previous sequence with a blank line or a ">".) I would try rebuild_in_place=True to try and optimize the position of your extra chain. You can specify what residues to work on with something like: rebuild_chain_list=A rebuild_res_start_list=27 rebuild_res_end_list=35 This will rebuild chain A27 through A35. For density modification you might want to use a mask based on your model. For this you would say: mask_from_pdb=my_existing_pdb_file.pdb Let me know if that doesn't do it! All the best, Tom T Date: Tue, 9 Jan 2018 20:50:41 +0000 From: "Flath, Ben" <bef206(a)mail.usask.ca> To: "phenixbb(a)phenix-online.org" <phenixbb(a)phenix-online.org> Subject: [phenixbb] Autobuild in to "extra density" Message-ID: <52cba352941e48869fc9d5223a97ccaf(a)Mail06.usask.ca> Content-Type: text/plain; charset="us-ascii" Hi All I have a structure I am building/refining at 2.6 A resolution, there are three NSC molecules in P321 unit cell. Each monomer contains 150 aa and are at least 95% built. Here is where I need some help. There is extra density. Gel and Mass Spec data suggests that there is a smaller MW weight protein/band contained in the crystals which is most likely a fragment of my target protein. Basically I have 3 NCS copies plus a half a molecule that does not appear to have the same tertiary structure (LSQ & SSM do not align well) as the other 3 molecules. I have been able to build several poly-A helices in to this density and R/Rfree are now 0.25/0.31. My Question is, how do I set up a phenix run (presumably autobuild) So that I can begin to dock my sequence in to these chains and have them extended? Does my sequence input file need to include more than one sequence string? Asking autobuild to find and build 4 NCS groups does not seem to build anything in to this extra density (Also the sigma level for the extra density chains seems to be somewhat less than the well-defined part) I am guessing this is a rebuild_in_place=false job? Can I specify only a certain chain only to be rebuilt? Also are there some special considerations with regard to density modification I should be aware of? Any help would be much appreciated. Regards Benjamin Flath, M.Sc. Research Assistant, Cygler Lab University of Saskatchewan Department of Biochemistry Room 3D40 HSCI Box 27, 107 Wiggins Road Saskatoon, SK S7N 5E5 Phone: 306 220-7355 email: benjamin.f(a)usask.ca<mailto:[email protected]> -- Thomas C Terwilliger Laboratory Fellow, Los Alamos National Laboratory Senior Scientist, New Mexico Consortium 100 Entrada Dr, Los Alamos, NM 87544 Email: tterwilliger(a)newmexicoconsortium.org Tel: 505-431-0033

2 2

Fourier shell correlation (FSC) in cryo-EM refinement
by oleg＠quantumbioinc.com 18 Jan '18

18 Jan '18

I started to do some refinements of cryo-EM structures. But I could not find FSC (e.g. FSC average) quality metrics in the refinement log. Is it because of the real space refinement methodology or some features need to be activated? Please advise Thanks Oleg

1 0

model statistics
by wtempel 17 Jan '18

17 Jan '18

Pre-1.13, the `model_statistics=True` option of PDBTOOLS produced a listing of average B-Factors, atom counts, etc. Is this functionality provided by another command in the current version of PHENIX? Many thanks. Wolfram Tempel

2 1

keeping ligand rigid in phenix refine
by Vikram Dalal 12 Jan '18

12 Jan '18

Hi all, I want to keep my ligand positions rigids during phenix refine, so that its position wont affected after phenix refine. Thanks & Regards, VIKRAM DALAL Research Scholar

2 1

"standard" monomer restraints
by wtempel 11 Jan '18

11 Jan '18

Hello, how/where (in the PHENIX installation tree?) can one look up target values (effective during restrained refinement in PHENIX) for specific bond lengths and angles of monomers like amino acids or nucleosides? Thanks. Wolfram Tempel

4 7

Autobuild in to "extra density"
by Flath, Ben 09 Jan '18

09 Jan '18

Hi All I have a structure I am building/refining at 2.6 A resolution, there are three NSC molecules in P321 unit cell. Each monomer contains 150 aa and are at least 95% built. Here is where I need some help. There is extra density. Gel and Mass Spec data suggests that there is a smaller MW weight protein/band contained in the crystals which is most likely a fragment of my target protein. Basically I have 3 NCS copies plus a half a molecule that does not appear to have the same tertiary structure (LSQ & SSM do not align well) as the other 3 molecules. I have been able to build several poly-A helices in to this density and R/Rfree are now 0.25/0.31. My Question is, how do I set up a phenix run (presumably autobuild) So that I can begin to dock my sequence in to these chains and have them extended? Does my sequence input file need to include more than one sequence string? Asking autobuild to find and build 4 NCS groups does not seem to build anything in to this extra density (Also the sigma level for the extra density chains seems to be somewhat less than the well-defined part) I am guessing this is a rebuild_in_place=false job? Can I specify only a certain chain only to be rebuilt? Also are there some special considerations with regard to density modification I should be aware of? Any help would be much appreciated. Regards Benjamin Flath, M.Sc. Research Assistant, Cygler Lab University of Saskatchewan Department of Biochemistry Room 3D40 HSCI Box 27, 107 Wiggins Road Saskatoon, SK S7N 5E5 Phone: 306 220-7355 email: benjamin.f(a)usask.ca<mailto:[email protected]>

1 0

Phenix version 1.13 released
by Paul Adams 09 Jan '18

09 Jan '18

The Phenix developers are pleased to announce that version 1.13 of Phenix is now available (build 1.13-2998). Binary installers for Linux, Mac OSX, and Windows platforms are available at the download site: http://phenix-online.org/download/ Highlights for this version: - phenix.map_to_model - better symmetry support and improved runtime efficiency - phenix.structure_search - structural library and internal support for mmCIF - phenix.ligand_identification - limit ligand size for search - Phaser 2.8.1 - various bug fixes - Structure Comparison - more/improved validation information (ligands, waters, cis/trans peptides, HIS protonation) - GUI - automatic validation after phenix.real_space_refine; visual improvements in validation - Improved handling of model mmCIF input/output - New Phenix video tutorials - Internal bug fixes and performance improvements - NEW FEATURES - Phenix.map_to_model: - Allows cases where symmetry that is neither point-group nor helical is present - Allows splitting runs into many small independent steps - Set defaults for quick=True to run somewhat more quickly - GUI - Validation information added to phenix.real_space_refine results - phenix.real_space_refine GUI accepts input for reference models - Polygon stand-alone GUI deprecated; rolled into Comprehensive Validation GUI - Old Polygon jobs cannot be restored - Validation GUI - Stoplight colors (green/orange/red) added to validation summary - In rotamer outlier table, uncalculated chi angles now display blank instead of None - Validation table columns adjusted to reduce whitespace - Updated dependencies - Python 2.7.13 -> 2.7.14 - Boost 1.56 -> Boost 1.63 - Numpy 1.8.1 -> 1.8.2 - phenix.structure_search: - Updated to November 2017 RCSB non-redundant library (representatives of 100% sequence-identity clusters.) - Changed to mmcif-based coordinate handling internally. - phenix.ligand_identification: - Added search limit on ligand sizes (Non-H atoms) - Run LigandFit algorithm internally as default. - Phaser-2.8.1 - bugfixes - anisotropy correction of map coefficients after MR - detection of duplicate solutions - correct cell for PDB after refinement of cell for input data - packing places molecules near origin in compact arrangement - Structure Comparison - Updated to include favoured, allowed and outliers for validations tabs such as rotamers - Add featurs such as ligands information & locations; water locations; cis/trans peptides; and histidine protonation - General increase of robustness and flexibility - Greater flexibility for model/data input including directory tree travesal and user defined scripts - Restraints - Added better SF4 restraints - Added mechanism to improve SF4 linking - Various performance enhancements - Better handling of model mmCIF input/output - New Phenix video tutorials: - Cryo-EM tools in Phenix - overview - How to run MolProbity - step by step (web interface and Phenix GUI) - MolProbity: All atom contacts tutorial For a full list of changes see: http://www.phenix-online.org/documentation/CHANGES Please note that this publication should be used to cite use of Phenix: PHENIX: a comprehensive Python-based system for macromolecular structure solution. P. D. Adams, P. V. Afonine, G. Bunkóczi, V. B. Chen, I. W. Davis, N. Echols, J. J. Headd, L.-W. Hung, G. J. Kapral, R. W. Grosse-Kunstleve, A. J. McCoy, N. W. Moriarty, R. Oeffner, R. J. Read, D. C. Richardson, J. S. Richardson, T. C. Terwilliger and P. H. Zwart. Acta Cryst. D66, 213-221 (2010). Full documentation is available here: http://www.phenix-online.org/documentation/ There is a Phenix bulletin board: http://www.phenix-online.org/mailman/listinfo/phenixbb/ Please consult the installer README file or online documentation for installation instructions. Direct questions and problem reports to the bulletin board or: help(a)phenix-online.org and bugs(a)phenix-online.org Commercial users interested in obtaining access to Phenix should visit the Phenix website for information about the Phenix Industrial Consortium. The development of Phenix is principally funded by the National Institute of General Medical Sciences (NIH) under grant P01-GM063210. We also acknowledge the generous support of the members of the Phenix Industrial Consortium. -- Paul Adams Division Director, Molecular Biophysics & Integrated Bioimaging, Lawrence Berkeley Lab Division Deputy for Biosciences, Advanced Light Source, Lawrence Berkeley Lab Adjunct Professor, Department of Bioengineering, U.C. Berkeley Vice President for Technology, the Joint BioEnergy Institute Laboratory Research Manager, ENIGMA Science Focus Area Building 33, Room 347 Building 978, Room 4126 Tel: 1-510-486-4225, Fax: 1-510-486-5909 http://cci.lbl.gov/paul Lawrence Berkeley Laboratory 1 Cyclotron Road BLDG 33R0345 Berkeley, CA 94720, USA. Executive Assistant: Louise Benvenue [ LBenvenue(a)lbl.gov ][ 1-510-495-2506 ] --

1 0