November 2018 - phenixbb - phenix-online.org

mmCIF for deposition
by Patrick Loll 19 Mar '19

19 Mar '19

Hi all, Following the instructions given here: https://www.phenix-online.org/documentation/overviews/xray-structure-deposi… I’m attempting to use mmtbx.prepare_pdb_deposition to insert sequence information into the mmCIF that contains the model coordinates. Unfortunately, the program fails with an error (shown below). The sequence file is FASTA format, and contains an entry for each of the (4) chains in the AU, i.e. >A MSEQNCE… >B MSEQNCE… etc. Any bright ideas? ============this is what happens (vide infra)==================================== [PJL-iMac:blahblah/PJL_final] loll% mmtbx.prepare_pdb_deposition filename.cif seq_name.fasta Starting mmtbx.prepare_pdb_deposition on Mon Oct 1 11:16:23 2018 by loll =============================================================================== Processing files: ------------------------------------------------------------------------------- Found model, filename.cif Found sequence, seq_name.fasta Processing PHIL parameters: ------------------------------------------------------------------------------- No PHIL parameters found Final processed PHIL parameters: ------------------------------------------------------------------------------- data_manager { model { file = “filename.cif" } default_model = “filename.cif" sequence_files = "seq_name.fasta" default_sequence = "seq_name.fasta" } Starting job =============================================================================== Validating inputs Using model: filename.cif Using sequence: seq_name.fasta Creating mmCIF block for sequence Traceback (most recent call last): File "/Applications/phenix-1.14-3260/build/../modules/cctbx_project/mmtbx/command_line/prepare_pdb_deposition.py", line 9, in <module> run_program(program_class=prepare_pdb_deposition.Program) File "/Applications/phenix-1.14-3260/modules/cctbx_project/iotbx/cli_parser.py", line 71, in run_program task.run() File "/Applications/phenix-1.14-3260/modules/cctbx_project/mmtbx/programs/prepare_pdb_deposition.py", line 98, in run alignment_params=self.params.mmtbx.validation.sequence.sequence_alignment) File "/Applications/phenix-1.14-3260/modules/cctbx_project/iotbx/pdb/hierarchy.py", line 1190, in as_cif_block_with_sequence assert len(chain.residue_groups) + chain.n_missing_start + chain.n_missing_end == len(sequence) AssertionError (gouts of smoke, terrified squealing) The ‘No PHIL parameters found’ message is concerning, but the program clearly seems to be finding the input file names. Suggestions welcome. Thanks, Pat --------------------------------------------------------------------------------------- Patrick J. Loll, Ph. D. Professor of Biochemistry & Molecular Biology Drexel University College of Medicine Room 10-102 New College Building 245 N. 15th St., Mailstop 497 Philadelphia, PA 19102-1192 USA (215) 762-7706 pjloll(a)gmail.com pjl28(a)drexel.edu

3 4

mmCIF in Phenix 1.14-3260
by Dominik Oberthuer 30 Dec '18

30 Dec '18

Dear all, I recently found that phenix.refine in version 1.14-3260 generates coordinate mmCIFs that the PDB deposition system can't handle. After struggling with this for some time I used an installation of Phenix 1.13-2998 I still have on my MacBook and used the mmCIF/PDB-conversion tool from this version and had no more trouble with uploading the mmCIF to the PDB. Maybe it is worthwhile to check which changes from 1.13 to 1.14 might have caused these issues. Thanks! Dominik -- Dr. Dominik Oberthür CFEL - Center for Free-Electron Laser Science - DESY Coherent Imaging Division Notkestrasse 85 22607 Hamburg Germany phone: +49 (0)40 8998 6394 dominik.oberthuer(a)cfel.de

5 11

Re: [phenixbb] Molprobity values on output pdb
by Christopher Williams 30 Nov '18

30 Nov '18

Hi Boaz, Is it possible for you to send me (and just me, not the bulletin board) your file for testing? Thank you, if so. Alternatively, you can try using our alternate site at http:// altmolprobity .biochem.duke.edu, where a bugfix that probably addresses this issue is currently under testing. Thanks and good luck, -Christopher Williams ---Richardson Lab, Duke University On Fri, Nov 30, 2018 at 11:57 AM Boaz Shaanan <bshaanan(a)bgu.ac.il> wrote: > Hi, > > > I noticed small differences between the molprobity > all-atoms clashscore reported in the output pdb file and the results > reported by the molprobity run (build 3318). > > > Cheers, > > > Boaz > > > > > > > > > > > > > *Boaz Shaanan, Ph.D. Dept. of Life > Sciences Ben-Gurion University of the > Negev Beer-Sheva > 84105 > Israel > E-mail: > bshaanan(a)bgu.ac.il <bshaanan(a)bgu.ac.il> Phone: 972-8-647-2220 > Fax: 972-8-647-2992 or 972-8-646-1710 * > > > > > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org

1 0

Validation Completeness Issue
by Antoine Koehl 29 Nov '18

29 Nov '18

Hi, I’m in the process of uploading data to the PDB. While AIMLESS had estimated my completeness at 94% (similar to the XTriage value of 93.2%), the internal PDB validation through EDS estimates my completeness to be closer to 83.5%. This is a rather large difference. Both are using the exact same resolution range (49.57-4.00). Is there something that EDS does differently for estimating completeness? Please advise, Antoine

2 1

Test message
by Billy Poon 28 Nov '18

28 Nov '18

This is just a test. -- Billy K. Poon Research Scientist, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory 1 Cyclotron Road, M/S 33R0345 Berkeley, CA 94720 Tel: (510) 486-5709 Fax: (510) 486-5909 Web: https://phenix-online.org

1 0

Alternate conformer clash problem in phenix.refine
by Aaron Oakley 20 Nov '18

20 Nov '18

Salve! I am refining a protein/ligand complex where the ligand is bound with two conformers. Conformer A is covalently bound to a cysteine residue. Conformer B is free. I have prepared an appropriate cif dictionary for the ligand including info on handling the link. The problem is that during refinement, non-bonded interactions between the two conformers appear to not be switched off and their geometry becomes distorted. Is this diagnosis correct? If so, is there a way to manually switch off interactions? With thanks, a++ Aaron Oakley Associate Professor School of Chemistry and Molecular Bioscience | Molecular Horizons | Faculty of Science, Medicine and Health University of Wollongong NSW 2522 Australia T +61 2 4221 4347 | F +61 2 4221 4287 [cid:[email protected]]

3 2

exclude clashes for non-symmetry contacts
by Edwin Pozharski 17 Nov '18

17 Nov '18

Is there some way to make phenix.refine to ignore clashes for specific pair(s) of chains? I am dealing with a rare case of twinning where same protein molecule exists in two orientations in the same unit cell. I tried just to duplicate the molecule and set initial occupancy to 0.5, but refinement fails (as I expected) saying that there are too many close contacts. Ideally, I would like to proceed with ignoring close contacts between, say, chains A/B. I am aware that one can exclude groups of residues from symmetry clashes, but these two copies are in the same cell. I guess I could try shifting one into the next unit cell and then excluding symmetry clashes, but even assuming that will work it is a rather ugly hack. The alternative is probably to define the second orientation as an alternative conformation. Aside from aesthetic objections, I don't want to lose the ability to restrain NCS - I need two orientations to be identical structures, and I am not sure yet whether I can use NCS groups defined via alternative conformers. Cheers, Ed.

2 4

Normalized B-factor
by Mehmet Sen 16 Nov '18

16 Nov '18

Hello, I used the Structural Comparison tool to obtain normalized B- factor values for a couple of models, each with multiple chains. Is there an efficient way to visualize the normalized B-factor values (by writing over the old B-factor values) for the models, preferably in PyMOL? Thanks, Joyce V.

2 1

Protonation of a symmetry-related His in Zn coordination sphere
by Priit Eek 16 Nov '18

16 Nov '18

Hi, I have a structure in which one of the His-residues of a Zn coordination sphere is from a symmetry-related protein chain. I specified the symmetry in an edits file so the coordination sphere is nice and plays well in refinement. I now added hydrogens to the model, but the His from the other chain does not get protonated correctly. I assume reduce doesn’t detect the presence of the symmetry-related Zn. It protonates NE, while that is the atom that interacts with Zn, but ND should be protonated instead. What would be the best way to fix this? And another question on the same matter: is it possible to specify a LINK in PDB between these atoms? Best regards, Priit ——— Priit Eek, PhD Researcher Department of Chemistry and Biotechnology Tallinn University of Technology Tel. +372 620 4387 priit.eek(a)taltech.ee

2 1

Postdoc Position - Berkeley
by Paul Adams 14 Nov '18

14 Nov '18

Lawrence Berkeley Laboratory Postdoctoral Researcher Job ID: 85784 Division: Molecular Biophysics & Integrated Bioimaging (Joint BioEnergy Institute) Date Opened: 11/1/2018 Summary: A postdoctoral position is immediately available to study the structure and function of macromolecular complexes and enzymes using biochemical, X-ray crystallographic and electron cryo-microscopy (cryo-EM) methods. The biological systems to be studied are: - Glycosyl transferases responsible for the synthesis of hemicelluloses in plants - Novel glycosyl hydrolases that are able to breakdown cellulosic material for biofuels production - Enzymes involved in lignin biosynthesis, degradation and valorization - Secondary metabolite and natural product enzymes This position will be part of the Structural Biology group of the Technology Division at the Joint BioEnergy Institute (JBEI) in Emeryville, California. To learn more about JBEI visit: http://www.jbei.org/ Duties: The successful candidate will have experience characterizing enzymes using biochemical techniques, and using crystallographic methods. Familiarity with cryo-EM methods would be helpful, but not essential. Robotic hardware for performing crystallization trials and imaging results are available. Crystals will be characterized and data collected using the beamline resources of the Berkeley Center for Structural Biology at the Advanced Light Source. For appropriate systems cryo-EM data will be obtained using in-house microscopes, the Bay Area Center for Cryo-EM, and other national user facilities. Qualifications: a Ph.D. in biochemistry, molecular biology, structural biology, chemistry or a related field. Demonstrated experience of scientific research using biochemistry techniques including enzymatic assays, and crystallographic methods. Experience with macromolecular crystallization techniques. Experience with cloning methods and protein purification methods would be helpful. Strong problem solving skills. Solid interpersonal skills and the ability to work in a team environment are critical. This is a full time, 2 years, postdoctoral appointment with the possibility of renewal based upon satisfactory job performance, continuing availability of funds and ongoing operational needs. You must have less than 3 years paid postdoctoral experience. Salary for Postdoctoral positions depends on years of experience post-degree. Berkeley Lab (LBNL) addresses the world’s most urgent scientific challenges by advancing sustainable energy, protecting human health, creating new materials, and revealing the origin and fate of the universe. Founded in 1931, Berkeley Lab’s scientific expertise has been recognized with 13 Nobel prizes. The University of California manages Berkeley Lab for the U.S. Department of Energy’s Office of Science. Berkeley Lab is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status. To apply visit https://lbl.taleo.net/careersection/2/jobsearch.ftl?lang=en and search for the job number 85784 or visit: https://lbl.referrals.selectminds.com/jobs/crystallography-postdoctoral-sch… -- Paul Adams Division Director, Molecular Biophysics & Integrated Bioimaging, Lawrence Berkeley Lab Division Deputy for Biosciences, Advanced Light Source, Lawrence Berkeley Lab Adjunct Professor, Department of Bioengineering, U.C. Berkeley Vice President for Technology, the Joint BioEnergy Institute Laboratory Research Manager, ENIGMA Science Focus Area Building 33, Room 347 Building 978, Room 4126 Tel: 1-510-486-4225, Fax: 1-510-486-5909 http://cci.lbl.gov/paul Lawrence Berkeley Laboratory 1 Cyclotron Road BLDG 33R0345 Berkeley, CA 94720, USA. Executive Assistant: Louise Benvenue [ LBenvenue(a)lbl.gov ][ 1-510-495-2506 ] --

1 0