July 2019 - phenixbb - phenix-online.org

Phenix, MolProbity, and Amber
by Eric Williams 30 Jul '19

30 Jul '19

Greetings, all I'm trying to run the MolProbity programs (reduce, ramalyze, etc) in Phenix 1.16-3649, and I get the following warning: "Could not import the compiled Python-sander interface. Make sure you have the Python development libraries installed and that you have sourced amber.sh or amber.csh" I do not recall seeing that in earlier versions. Do I need to worry about it? If so, how do I fix it? Thanks. :) Eric

2 1

General interest
by John R Helliwell 30 Jul '19

30 Jul '19

Dear Colleagues, For your general interest, you can find the lecture slides that I presented at ACA 2019 in the Transactions Symposium on Data via the weblink here:- https://forums.iucr.org/viewtopic.php?f=39&t=421 Best wishes, John Emeritus Professor John R Helliwell DSc Chairman of IUCr CommDat

1 0

ISOLDE dev builds now available
by Tristan Croll 30 Jul '19

30 Jul '19

Hi all, Since the release of ISOLDE 1.0b3 I've begun releasing regular (weekly~fortnightly) development builds of ISOLDE. These are built against the ChimeraX daily build at the time of release - if you download a ChimeraX-daily build and install ISOLDE in the usual way via Tools/More Tools... this is what you'll get. In case you're worried, the dev and official 1.0b3 builds install into different directories, so it's quite straightforward to have both versions running independently on the same machine. The dev builds are *not* compatible with the ChimeraX 0.9 stable release. Some important changes since 1.0b3/ChimeraX 0.9: - the ChimeraX team have fixed some bugs affecting PDB and mmCIF I/O (primarily involving the handling of "imperfect" files) - fixed a bug causing the simulation to crash if the minimiser didn't converge in the first round - added status messages during simulation startup, and clear indications of when a simulation is running/paused - improved simulation startup time, and handling of custom ligands (preparing ligand definition files is a work in progress and will currently need you to do some work outside ISOLDE - feel free to contact me if you have an urgent case) Best regards, Tristan

1 0

modify.remove option in phenix.refine
by wtempel 29 Jul '19

29 Jul '19

Hi, for calculation of an omit map, with the atoms in question fully removed from the model, I experimented with the modify_start_model.modify.remove option and got: ====================== Modifying start model if requested ===================== Size before: 505 size after: 491 Traceback (most recent call last): File "/home/user1/phenix-1.16-3549/build/../modules/phenix/phenix/command_line/refine.py", line 11, in command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/home/user1/phenix-1.16-3549/modules/phenix/phenix/refinement/command_line.py", line 106, in run log=log) File "/home/user1/phenix-1.16-3549/modules/phenix/phenix/refinement/driver.py", line 271, in __init__ self.model.set_xray_structure(modify_model_obj.xray_structure) File "/home/user1/phenix-1.16-3549/modules/cctbx_project/mmtbx/model/model.py", line 693, in set_xray_structure self.set_sites_cart_from_xrs() File "/home/user1/phenix-1.16-3549/modules/cctbx_project/mmtbx/model/model.py", line 1722, in set_sites_cart_from_xrs self._pdb_hierarchy.adopt_xray_structure(self._xray_structure) File "/home/user1/phenix-1.16-3549/modules/cctbx_project/iotbx/pdb/hierarchy.py", line 688, in adopt_xray_structure raise RuntimeError("Incompatible size of hierarchy and scatterers array.") RuntimeError: Incompatible size of hierarchy and scatterers array. I verified that my intended selection indeed comprises 14 atoms. Has anyone used the remove option inside phenix.refine successfully. Thanks. Wolfram Tempel

2 1

cbf to sfrm
by Tim Gruene 28 Jul '19

28 Jul '19

Dear all, recently the conversion from CBF to SFRM frame format with APEX was discussed on the Bruker mailing list ("Synchrotron data with Bruker Software"), including a potential bug that parameters in the frames other than the first frame are not set correctly. The workaround to re-convert from SFRM to SFRM a second time did not help in my case. I therefore updated my program sfrmtools, available at https:// homepage.univie.ac.at/tim.gruene/research/programs/conv/sfrmtools/ With the option '-u',you can provide the first frame of the run, and via '-p' a parameter file that contains the critical parameters (see documentation at above URL) to update the header for all frames in this run. In case you have twinned data and want to benefit from SAINT, this should be possible with this feature. Both 64bit Linux binary and the source code are available. The program has no dependencies and should compile under any platform. I did not debug this new feature very thoroughly, but it worked for me so far. Any bug reports are welcome to this address tim.gruene(a)univie.ac.at I hope this is helpful for one or two users. I acknowledge the thorough documentation of XDS, of SAINT, and of the SFRM header format. Kind regards, Tim cc Bruker mailing list, CCP4BB, phenixBB -- -- Tim Gruene Head of the Centre for X-ray Structure Analysis Faculty of Chemistry University of Vienna Phone: +43-1-4277-70202 GPG Key ID = A46BEE1A

1 0

Unwanted LINK records
by Luca Pellegrini 27 Jul '19

27 Jul '19

Hello, Phenix.real_space_refine generates a few spurious covalent bonds between protein and ligand in my structure, which distort the local structure, and then adds the corresponding LINK records in the output file. Is there a way to avoid this? I am aware of the anti-link option previously mentioned in the phenixbb: http://www.phenix-online.org/pipermail/phenixbb/2018-January/023677.html, but I was wondering if there was another way of preventing this from happening. I am using Phenix 1.15.2-3472. Best wishes, Luca Luca Pellegrini, PhD Department of Biochemistry University of Cambridge Cambridge CB2 1GA United Kingdom lp212(a)cam.ac.uk tel.: 0044 1223 760469 https://www.bioc.cam.ac.uk/pellegrini-group/pellegrini-group @PellegriniLab

4 5

Symmetry of map vs Symmetry of model
by pramod kumar 27 Jul '19

27 Jul '19

Dear all, I have a query related to symmetry imposition and corresponding tweaking of model. If symmetry (say, C4) was imposed during the reconstruction of a 3D volume, does symmetry also need to be imposed when building the atomic model (say, in Phenix)? Or could this constrain be relaxed? Do we need to tweak the model in Coot for other chains or since it is build on symmetrical partners therefore should only be made in one chain and copied for all without any fitting? Pramod Jaykar, Ph.D.

2 1

Re: [phenixbb] Unwanted LINK records
by Dale Kreitler 26 Jul '19

26 Jul '19

Hi Luca, Try running with the parameter: refinement.pdb_interpretation.automatic_linking.link_ligands=False Check if automatic linking is enabled with the All parameters button in the GUI. Looks like the default might be True? -D On Fri, Jul 26, 2019 at 11:21 AM Luca Pellegrini <lp212(a)cam.ac.uk> wrote: > Hello, > > Phenix.real_space_refine generates a few spurious covalent bonds between > protein and ligand in my structure, which distort the local structure, and > then adds the corresponding LINK records in the output file. Is there a way > to avoid this? > > I am aware of the anti-link option previously mentioned in the phenixbb: > http://www.phenix-online.org/pipermail/phenixbb/2018-January/023677.html, > but I was wondering if there was another way of preventing this from > happening. I am using Phenix 1.15.2-3472. > > Best wishes, > Luca > > Luca Pellegrini, PhD > Department of Biochemistry > University of Cambridge > Cambridge CB2 1GA > United Kingdom > > lp212(a)cam.ac.uk > tel.: 0044 1223 760469 > https://www.bioc.cam.ac.uk/pellegrini-group/pellegrini-group > @PellegriniLab > > > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org > -- Dale Kreitler Graduate Research Assistant Gellman Lab Department of Chemistry University of Wisconsin-Madison

1 0

Symmetry of map Vs Symmetry of model
by pramod kumar 26 Jul '19

26 Jul '19

Dear all, I have a query related to symmetry imposition and corresponding tweaking of model. If symmetry (say, C4) was imposed during the reconstruction of a 3D volume, does symmetry also need to be imposed when building the atomic model (say, in Phenix)? Or could this constrain be relaxed? Do we need to tweak the model in Coot for other chains or since it is build on symmetrical partners therefore should only be made in one chain and copied for all without any fitting? Pramod Jaykar, Ph.D.

1 0

CryoEM specialist positions open at CSIR-CCMB, India
by Rukmini Raju 23 Jul '19

23 Jul '19

Dear All, This is to bring to your kind attention two vacancies for Structural Biologists with CryoEM expertise at the CCMB, Hyderabad, India. CSIR-Centre for Cellular and Molecular Biology, Hyderabad (CSIR-CCMB) is a Premier Research Laboratory under the Council of Scientific & Industrial Research (CSIR), involved in multidisciplinary R&D programmes of both basic and applied nature across scientific disciplines of biological sciences. The link for the application is given below: http://www.ccmb.res.in/index.php?view=notifications&mid=0&id=71&nid=268 Best regards, Sankar -- ****************************************************************************** Dr. Rajan Sankaranarayanan Chief Scientist, Structural Biology Laboratory CSIR-Centre for Cellular and Molecular Biology (CCMB) Uppal Road Hyderabad - 500 007 India. Ph: +91-(0)40 2719 2832 to 2835 (Lab) +91-(0)40 2719 2500 (CCMB Reception) Fax: +91-(0)40 2716 0252, 2716 0591 e-mail: sankar(a)ccmb.res.in sankarfr(a)yahoo.com Web: http://e-portal.ccmb.res.in/e-space/sankar/index.html ******************************************************************************** -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ R. Rukmini Principal Technical Officer Structural Biology, R-100, R&D Building CSIR-Centre for Cellular and Molecular Biology Uppal Road, Hyderabad - 500 007 India Phone# +91-40-27192953(callto:+91-40-27192953) (R-100) +91-40-27192835(callto:+91-40-27192835) (Lab, Main Building) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

1 1