- phenixbb - phenix-online.org

Rotamer error in real space refinement
by Nikos Pinotsis 23 Feb '24

23 Feb '24

Hi, I am using real space refine with the latest phenix 1.21-5207 for fitting a model into a cryoEM map. During refiment one Trp goes clearly out of density (vertical to the density) although the map is very well defined at this part of the protein. I tried local_grid_search either for every cycle or last, however it didn't fix the problem. I know that this is reported a couple of years ago as fixed (dev-4218), I am wondering if something changed during the last version. Another solution I can think it to keep the side chain of this Trp fixed. How can I do that? thanks Nikos -- ________________________________________ Nikos Pinotsis Associate Professor Biochemistry, Department of Chemistry National and Kapodistrian University of Athens

2 1

Define bond between O3' of a nucleotide to P of 3DR HETATM ligand (abasic nucleotide)
by Mark Saper 23 Feb '24

23 Feb '24

I need to create a phosphodiester bond between O3’ of a DNA nucleotide and P of a 3DR HETATM ligand (a modified nucleotide). I also need to delete O3P of the 3DR nucleotide. How can I create this restraint? Also, how can I get COOT to display this bond? Thanks, Mark _____________________ Mark A. Saper, Ph.D. Dept of Microbiology and Molecular Genetics Hebrew University Faculty of Medicine saper(a)umich.edu <mailto:[email protected]> | +972 52 815-0480

2 1

Tenure track position in Protein Science for Pathogen Defense
by Cygler, Miroslaw 20 Feb '24

20 Feb '24

Dear Colleagues, I am excited to let you know that the Department of Biochemistry, Microbiology and Immunology, College of Medicine, University of Saskatchewan, is searching for an exceptional candidate in the area of Protein Science for Pathogen Defense, to fill a tenure-track Canada Research Chair (CRC) Tier 2 position. The CRC program is the flagship of a national strategy to make Canada one of the world's top countries in research and development. We are looking for an outstanding early career scientist to establish and lead a groundbreaking research program in protein science to understand the mechanisms of bacterial and viral infection in humans or animals, to investigate host-pathogen interactions, or to discover novel mechanisms of defense against known and potential future pathogens. Within this broad scope, specific areas of interest include synthetic antigen design, the molecular basis of immune response to pathogens, mechanisms of antimicrobial resistance, and the prediction-guided design of artificial antibodies. We are interested in hiring a world-class expert in one or more of the following areas: (i) protein structure prediction and structural bioinformatics, (ii) protein design, and (iii) cryo-electron microscopy. A detailed advertisement with instruction how to apply is enclosed and can also be viewed here: <https://usask.csod.com/ux/ats/careersite/14/home/requisition/12015?c=usask&…> Canada Research Chair (CRC) Tier 2 in Protein Science for Pathogen Defense<https://usask.csod.com/ux/ats/careersite/14/home/requisition/12015?c=usask&…> protection.outlook.com<https://usask.csod.com/ux/ats/careersite/14/home/requisition/12015?c=usask&…> [X]<https://usask.csod.com/ux/ats/careersite/14/home/requisition/12015?c=usask&…> . Regards, Mirek ======================================================= Dr. Miroslaw Cygler, FCAHS Professor, Dept. Biochem, Microbiol & Immune, U. of Saskatchewan Canada Research Chair in Molecular Medicine Using Synchrotron Light Health Sciences Building 3D30.6 (Box 9) 107 Wiggins Road, Saskatoon, SK S7N 5E5 Canada Email: miroslaw.cygler(a)usask.ca<mailto:[email protected]> Website: http://research-groups.usask.ca/cyglerlab/ Phone: 306-966-4361, cell: 306-203-2317 =======================================================

1 0

Structural Biology Workshop, June 10-12, 2024, Arlington, VA
by Meilleur, Flora 15 Feb '24

15 Feb '24

Dear All, We would like to bring to your attention the 2024 Neutrons in Structural Biology workshop. This workshop will highlight the need for next-generation instruments and toolsets for structural biology, with a focus on neutrons and other complementary techniques, and the development of integrated experimental and computational frameworks that connect them. Neutrons in Structural Biology - Challenges & Opportunities June 10-12th 2024 Sheraton Pentagon City Hotel, Arlington, VA. For details and registration see: Neutrons in Structural Biology - Challenges & Opportunities<https://conference.sns.gov/event/402/> The workshop will include a 1-day satellite training workshop (June 10, 2024) to educate graduate students and postdoctoral researchers in the application of neutron techniques in structural biology. A limited numbers of travel awards are available to support graduate students and post-doctoral fellows attendance at the workshop. The travel award application deadline is April 12, 2024. Details here<https://conference.sns.gov/event/402/page/2891-travel-awards-deadline-april…>. Flora Meilleur on behalf of the organizing committee: Andrey Kovalevsky Flora Meilleur Dean Myles Hugh O'Neill Flora Meilleur, Ph.D. Neutron Scattering Scientist Neutron Sciences Directorate Oak Ridge National Laboratory Professor Molecular & Structural Biochemistry N C State University Editor, Journal of Applied Crystallography Office: 865-576-2779

1 0

to leave atoms out of ADP restraints
by Jorge Iulek 13 Feb '24

13 Feb '24

Hi, all, The ADP restraints I refer to in this discussion are the ones that would make B-factors of nearby atoms to influence (or more or less resemble) each other. For some very disordered side chains, I would like to test "taking out" the "more disordered" atoms (maybe for high chi angle variability) of these restraints, for them to be more free to skyrocket, but also that they do not influence so much the main chain, in some cases where the flexibility difference between main and side chain seems to be significant. Is there a way to do so? Thanks, Jorge

2 2

helical structure - Real space refinement
by Dmitry Semchonok 01 Feb '24

01 Feb '24

Dear colleagues, Is there any specific procedure for Real space refinement in Phenix, having a map and model when working with helical structure? Many thanks Kind regard, Dmitry

2 1

RealSpaceRefine Nucleic acid SS restraints ?
by CUNIASSE Philippe 01 Feb '24

01 Feb '24

Dear all, I am currently refining a protein-nucleic acid structure obtained by MDFF (NAMD) with a 2.9 Å cryo-EM map. Dues to the poor density of the map at the end of the DNA duplex (likely due to breathing at the ends of the duplex), the structure of the DNA tends to be distorted. I tried to set up a set of nucleic acid restraints (Base pairing and base stacking for the full sequence), however, despite the fact that the syntax was checked and no error message is present in the log file, it seems that the restraints are not taken into account as if the constant restraints were two weak. And indeed when examining the refined structure, the pairing and stacking restraints for the base pairs at the extremities of the DNA duplex are not fulfilled. Have you a suggestion to solve this problem ? Thanks in advance for your help. Best regards. Philippe. ----------------------------------------------- Philippe Cuniasse, PhD/HDR. Institute for Integrative Biology of the Cell (I2BC) UMR 9198 CNRS-CEA-Univ Paris Sud Bat 144 CE-Saclay 91191 Gif-sur-Yvette Cedex, France Tel: (33) 1 69 08 56 35 Fax: (33) 1 69 08 47 12 Email: philippe.cuniasse(a)cea.fr<mailto:[email protected]> Web: http://biodev.cea.fr/rasmot3d/ Web: https://www.i2bc.paris-saclay.fr [signature_2602492259]

4 6

leave residue inside its electron density when neighbor is too close
by Murpholino Peligro 29 Jan '24

29 Jan '24

What is the recommended approach to tell phenix.refine to leave the residue inside its electron density? (crystal neighbors) The green model is the input to phenix.refine, the maps and the yellow model are the output of phenix.refine. As you can see, phenix.refine will move the residue outside the density (to avoid clashes I guess?) I have tried setting the occupancy of OXT to 0.5, but it is not good. (you can see there is a water in a special position, just above the bad residue) Any more ideas?

2 1

phenix.mtriage output model-map
by joe.wilson2023 23 Jan '24

23 Jan '24

Dear Phenix team, I am new to Phenix and using the phenix.mtriage to get the map-model FSC results. It gives the correct results at the same time I also want to produce the mode-map used for the FSC calculation. Is there an option for this? If not how can I reproduce the same model-map with another phenix command? Many thanks, Joe

2 3

ResolveCryoEM problem
by Luca Pellegrini 22 Jan '24

22 Jan '24

Hi, I am trying to run Resolve with two half maps and a sequence file with ncs copies of the sequence. Resolve stops with the message: “Need a symmetry file if ncs_copies > 1 and using models”. But I am not using models. Please advise. Regards, Luca Luca Pellegrini, PhD Department of Biochemistry University of Cambridge Cambridge CB2 1GA UK

2 1