- phenixbb - phenix-online.org

Autobuild combine
by Heather L Condurso 03 Dec '13

03 Dec '13

Hi all, I am still having issues with Autobuild giving errors during the combine step. I've downloaded the latest build and hope that will solve the problem, but in the mean time I'm having an issue trying to combine the models. I've been following the script: #!/bin/csh -f #COMBINE_MODELS SCRIPT if (-d PDS || -d AutoBuild_run_1_) then echo "Please run in a directory without PDS or AutoBuild_run_1_" exit 1 endif echo "Setting up combine models with a dummy run. NOTE: multiple_models_group_number must be correct" phenix.autobuild fobs.mtz multiple_models=true seq_file=seq.dat combine_only=true multiple_models_group_number=2 multiple_models_number=1 > dummy_autobuild.log echo "Copying files to AutoBuild_run_1_/MULTIPLE_MODELS" mkdir AutoBuild_run_1_/MULTIPLE_MODELS cp coords1.pdb AutoBuild_run_1_/MULTIPLE_MODELS/initial_model.pdb_1_1 cp coords2.pdb AutoBuild_run_1_/MULTIPLE_MODELS/initial_model.pdb_1_2 cp map_coeffs_1.mtz AutoBuild_run_1_/MULTIPLE_MODELS/initial_model.mtz_1_1 cp map_coeffs_2.mtz AutoBuild_run_1_/MULTIPLE_MODELS/initial_model.mtz_1_2 ls AutoBuild_run_1_/MULTIPLE_MODELS/ echo "Running autobuild to combine files in AutoBuild_run_1_/MULTIPLE_MODELS" phenix.autobuild combine_only=true seq_file=seq.dat carry_on=true run=1 > autobuild_combine.log # END OF COMBINE_MODELS SCRIPT # Here are the two log files. I used the expl_fobs_phases_freeR_flags.mtz as fobs.mtz and changed each overall_best.pdb and overall_best_refine_map_coeffs.mtz as the model and map to combine. Thanks, Heather

2 2

AutoSol/Heavy atom sites/outside the model
by Egor Tchesnokov 03 Dec '13

03 Dec '13

Hello, Level: beginner 1. Data collected at wavelength of 0.9537 2. Ran Xtriage: anomalous data seem to extend to 2.2 A 3. Ran Phaser-MR to get partial model (1 copy in AU) 4. Ran AutoSol using partial model and anomalous data AutoSol finds heavy atom sites (FOM=0.69; Overall score=75.6+/-3.3). Coot displays model/density without heavy atoms Heavy atoms are displayed outside the model (using zoom out). Question: what did I do wrong? Thank you for your time and help. Egor

2 1

Red patches of electron density
by Singh, Bishal 02 Dec '13

02 Dec '13

Hi, I am solving a crystal structure at 1.2 Å with completeness 97.3% in the highest resolution shell. There are few small patches of red electron densities on the main chain of a flexible loop at a contour level of ~3sigma of difference ED map. Refinement parameters were following: XYZ coordinates, individual B-factor, optimize X-ray/stereochemistry weight, optimize X-ray/ADP weight and individual Anisotropic ADP for amino acids excluding hydrogen. Target weights are as default in phenix.refine. I already have observed two alternative conformation for this region in another crystal structure. Therefore I am thinking that these red patches are because of lower occupancy of these residues. Please suggest me what shall I do. I shall be grateful for your words. With regards, Bishal Singh University of Heidelberg, Germany

2 1

Iterative build omit map error
by Heather L Condurso 28 Nov '13

28 Nov '13

SO just as my omit map run should have finished, it gave an error instead. I'm running 1.8.4-1496 on a Mac with OSX 10.6.8 and 8GB of memory. Here is the end of the log file: Splitting work into 32 jobs and running with 1 processors using sh background=False in /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0 Final job will be run with sh with background=True Starting job 1...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_1.log Starting job 2...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_2.log Starting job 3...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_3.log Starting job 4...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_4.log Starting job 5...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_5.log Starting job 6...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_6.log Starting job 7...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_7.log Starting job 8...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_8.log Starting job 9...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_9.log Starting job 10...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_10.log Starting job 11...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_11.log Starting job 12...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_12.log Starting job 13...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_13.log Starting job 14...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_14.log Starting job 15...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_15.log Starting job 16...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_16.log Starting job 17...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_17.log Starting job 18...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_18.log Starting job 19...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_19.log Starting job 20...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_20.log Starting job 21...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_21.log Starting job 22...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_22.log Starting job 23...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_23.log Starting job 24...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_24.log Starting job 25...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_25.log Starting job 26...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_26.log Starting job 27...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_27.log Starting job 28...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_28.log Starting job 29...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_29.log Starting job 30...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_30.log Starting job 31...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_31.log Starting job 32...Log will be: /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_32.log ******************************************************************************** Sorry, a subprocess has failed... END OF LOG FILE /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_32.log : /TEMP0/Build_composite_refined_3.pdb R/Rfree=0.32/0.39 Maps from refinement will be filled (2FOFCWT PH2FOFCWT) Set refine map coeffs file pdb_file_refine_map_coeffs to refine_map_coeffs_3.mtz Rebuilding side chains from Build_composite_refined_3.pdb Refining model: edit_model.pdb approx_equal eps: 1e-06 approx_equal multiplier: 10000000000.0 0.0197876048373 approx_equal ERROR 0.0197856373852 approx_equal ERROR Refinement strategy: ['individual_sites', 'individual_adp', 'occupancies'] Moving refinement file AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3_001_f_model.mtz to AutoBuild_run_32_/TEMP0/refine_fmodel.mtz Moving refinement file AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3_001.mtz to AutoBuild_run_32_/TEMP0/refine_map_coeffs_3.mtz Model: AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3.pdb R/Rfree=0.33/0.38 Maps from refinement will be filled (2FOFCWT PH2FOFCWT) Set refine map coeffs file pdb_file_refine_map_coeffs to refine_map_coeffs_3.mtz ******************************************************************************** Failed to carry out AutoBuild_parallel_omit: ******************************************************************************** Sorry, a subprocess has failed... END OF LOG FILE /Users/stevebruner/Desktop/APS_102313/MdnJB/AutoBuild_run_22_/TEMP0/RUN_FILE_32.log : /TEMP0/Build_composite_refined_3.pdb R/Rfree=0.32/0.39 Maps from refinement will be filled (2FOFCWT PH2FOFCWT) Set refine map coeffs file pdb_file_refine_map_coeffs to refine_map_coeffs_3.mtz Rebuilding side chains from Build_composite_refined_3.pdb Refining model: edit_model.pdb approx_equal eps: 1e-06 approx_equal multiplier: 10000000000.0 0.0197876048373 approx_equal ERROR 0.0197856373852 approx_equal ERROR Refinement strategy: ['individual_sites', 'individual_adp', 'occupancies'] Moving refinement file AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3_001_f_model.mtz to AutoBuild_run_32_/TEMP0/refine_fmodel.mtz Moving refinement file AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3_001.mtz to AutoBuild_run_32_/TEMP0/refine_map_coeffs_3.mtz Model: AutoBuild_run_32_/TEMP0/Build_composite_refined_side_3.pdb R/Rfree=0.33/0.38 Maps from refinement will be filled (2FOFCWT PH2FOFCWT) Set refine map coeffs file pdb_file_refine_map_coeffs to refine_map_coeffs_3.mtz ******************************************************************************** Can this be salvaged? It took 5 days to run. I found a section about this in the documentation, but I can't find the maps for each region overall_best_denmod_map_coeffs.mtz_OMIT_REGION_1 etc. I can only find working_best_denmod_map_coeffs.mtz_OMIT_REGION_1 etc. Will these maps work? Can you tell what the error means so that I can avoid this problem in the future? Thanks, Heather

2 1

zero B-factors
by Edna Patricia Matta, Ms 26 Nov '13

26 Nov '13

Hello, Recently I did submit a structure to the PDB but they found that some atoms had zero value for the B-factors. I am new in this filed and I do not know what to do. There have been reports of problems with some versions of phenix about this. I used Phenix 1.8. I repeted the refinement doing restrain NCS-related B-factors but I do not find where to check for the the B-factor values in the the log file. Somebody can help me? Thanks a lot, Edna

7 15

Re: [phenixbb] [ccp4bb] Ligandfit - problem with ligand_start
by Terwilliger, Thomas C 26 Nov '13

26 Nov '13

Hi Danilo, The most likely problem is that the ligand_start file has to have enough atoms in it to define a fixed group in the ligand. The way that ligandfit works is that it breaks a ligand up into rigid groups connected by rotatable bonds. The ligand_start file has to contain one complete rigid group. So probably if you supply a little more of the ligand then it might run. Just to test this, can you try this test of using a ligand_start file: phenix_regression.wizards.test_resolve resolve test_fit_start And then if that gives an "OK", try this: cd test_fit_start phenix.ligandfit ligand=side.pdb ligand_start=start.pdb resolve_map.mtz quick=true Does that run? If you the look at LigandFit_run_1_/TEMP0/resolve_ligand_fit.log Does that say >ligand_start start.pdb Starting configuration of ligand will be read from: start.pdb If all that works, then try adding more atoms to your ligand_start file. Let me know if that doesn't do it! All the best, Tom T Dear all, I am working on a membrane protein covalently bound to a molecular antanna: it is known that this molecule binds to lysine residue but I do not know how many and which lysine residues it binds. 20 diffraction datasets of this protein-ligand complex have been obtained and now, I would quickly localize the ligand using the Fo-Fc map of each data set and using the information on the covalent bound protein-ligand. Ligandfit tool (PHENIX) seems to be indicated to do this; to use the information on the covalent bound, I am using the ligand_start keyword with a pdb containing a ghost atom (however present in ligand model) perfectly superposed to the lysine atom that should bind the ligand. The command used is: phenix.ligandfit data=prot.mtz model=prot.pdb ligand=lig.pdb ligand_start=lig_start.pdb input_labels="FOFCWT PHFOFCWT" \ refine_ligand=True \ nproc=32 \ cif_def_file_list=lig.cif description: - prot.mtz (data) - prot.pdb (protein without ligand) - lig.pdb (ligand containing ghost atom) - lig_start.pdb (ghost atom superpose to NZ of a lysine) - lig.cif (restrain of lig.pdb) Strangely, no ligand is found at the end of the process even reducing ligand_cc_min to 0.01. I have run the same command by using an other protein where an other ligand has been correctly fitted but, also in this case, no ligand has been detected. Conversely, without the use of ligand_start, ligandfit properly localizes the ligand. I'm doing some mistake in the use of ligand_start? Do you know an other tool to perform a ligand fitting in these conditions? Thanks for your answers. Danilo

1 0

Ligandfit - problem with ligand_start
by Danilo Belviso 25 Nov '13

25 Nov '13

Dear all, I am working on a membrane protein bound to a antenna molecule: I know that the molecule binds to lysine residue but I do not know how many and which lysine residues it binds. 20 diffraction datasets of protein-ligand complex have been obtained and now, I would quickly localize the ligand using the Fo-Fc map of each data set and using the information on the covalent bound protein-ligand. Ligandfit tool (PHENIX) seems to be indicated to do this; to use the information on the covalent bound, I have thought to use the ligand_start keyword with a pdb containing a ghost atom (however present in ligand model) perfectly superposed to the lysine atom that should bind the ligand. The command used is: phenix.ligandfit data=prot.mtz model=prot.pdb ligand=lig.pdb ligand_start=lig_start.pdb input_labels="FOFCWT PHFOFCWT" \ refine_ligand=True \ nproc=32 \ cif_def_file_list=lig.cif description: - prot.mtz (data) - prot.pdb (protein without ligand) - lig.pdb (ligand containing ghost atom) - lig_start.pdb (ghost atom superpose to NZ of a lysine) - lig.cif (restrain of lig.pdb) At the end of the processing, ligand is not found. So, I have tryed with ligand_cc_min=0.01, but also in this case ligandfit does not give result. I have thought that no ligand is present. However, to be sure that all was correct, I have run the same command by using an other protein where an other ligand has been correctly fitted. Also in this case, no result has been obtained. Conversely, without the use of ligand_start, ligandfit properly localizes the ligand. I'm doing some mistake in the use of ligand_start? Thanks for your answers. Danilo

1 0

using reference model with polyA chain.
by Francis Reyes 20 Nov '13

20 Nov '13

I'm refining a structure ( at low res ), so I trimmed off all the side chain atoms from my model while my reference model still has these chains. I'm receiving errors like... ----------Correcting rotamer outliers to match reference model---------- ** evaluating rotamers for working model ** A 502 ILE is missing some sidechain atoms, **skipping** A 504 LYS is missing some sidechain atoms, **skipping** A 505 VAL is missing some sidechain atoms, **skipping** I don't care about the side chain atoms, but I'd still like the reference model restraints to provide secondary structure. Does "**skipping**" mean that the reference model is no longer being considered for the particular residue? Or will I still retain my secondary structure from the reference model? Thanks, F --------------------------------------------- Francis E. Reyes PhD 215 UCB University of Colorado at Boulder

2 1

completeness problem in phenix.refine
by Yarrow Madrona 20 Nov '13

20 Nov '13

Hi, I recently merged two data sets, one having a phase and the other Amplitudes. For some reason my completeness is always 50%. I had anomalous data but the completeness is around 100% after processing and when I do an mtz dump. I'm confused why I get a completeness of 50%. Thank you for any help you can provide. -Yarrow -- Yarrow Madrona Graduate Student Molecular Biology and Biochemistry Dept. University of California, Irvine Natural Sciences I, Rm 2403 Irvine, CA 92697

2 2

Error: "Error running main function (INPUT): LLG completion peak selection method not recognized"
by Egor Tchesnokov 19 Nov '13

19 Nov '13

Hello, I am trying to run Phaser/SAD or Phaser/MR_SAD (GUI using defaults), but I get the following error: "Error running main function (INPUT): LLG completion peak selection method not recognized". Thank you for your help Egor

2 1