- phenixbb - phenix-online.org

phenix.real_space_refine GUI
by Pavel Afonine 01 Jun '16

01 Jun '16

Hi Phenix users, since I had to answer this very same question off-list three times in past 48 hours, I thought I post this for future reference... Yes, thanks *Billy* there is a GUI for phenix.real_space_refine (tool to refine atomic models against maps, such as cryo-EM maps)! To give it a try, you need: 1) Get the latest nightly build, dev-2427 for instance: http://phenix-online.org/download/nightly_builds.cgi 2) Enable alpha-test programs in Phenix GUI. To do this: -- start Phenix GUI; -- go to Preferences and tick "Enable alpha-test programs and features" box; -- restart the GUI (close down, then start again); -- phenix.real_space_refine will be available in Refinement section on the right (Real-space refinement [alpha]). Note, it has a very handy feature to see/explore/edit secondary-structure restraints graphically. Also note that *this is alpha-test version meaning that glitches are not unexpected*! However your feedback will help to improve it, so please let us know should you encounter problems, have suggestions or found bug(s)! All the best, Pavel

1 0

r-free flag cell constant mismatch
by wtempel 01 Jun '16

01 Jun '16

Dear Phenix experts, our project involves crystals *A* and *B*, which are nearly isomorphous and of a protein’s complexes with two different small molecules, respectively. *A* diffracts better than *B*. The r-free flag from *A* was “attached” to *B*‘s input reflections with the CCP4 cad command and is still associated to *B*‘s slightly different cell dimensions. Would/should this be reason enough for refine to throw an error? The error message suggests changing the refinement.input.symmetry_safety_check setting. Can this setting be changed in the GUI? Thank you. Wolfram Tempel

3 2

Berkeley Server Downtime (6/3/2016)
by Billy Poon 01 Jun '16

01 Jun '16

Dear all, On Friday, June 3, our servers will be shutdown starting at 6:30 am Pacific for scheduled maintenance in our building (7 - 8 am). This will affect, - The Phenix web site (http://phenix-online.org/) - The DIALS West web site (http://dials.lbl.gov/) - The CCI web site (http://cci.lbl.gov/) - The Structural Biology Technology Portal (http://technology.sbkb.org/) We expect that the servers will be available by 8:30 am Pacific at the latest. Bug reports and emails requesting help should be queued and we will receive them once the servers are back online. We apologize for any inconvenience. -- Billy K. Poon Research Scientist, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory 1 Cyclotron Road, M/S 33R0345 Berkeley, CA 94720 Tel: (510) 486-5709 Fax: (510) 486-5909 Web: https://phenix-online.org

1 0

Gordon Research Conference on Diffraction Methods
by Edward Snell 01 Jun '16

01 Jun '16

While not a Phenix posting, we do encourage attendance from the usual suspects! We'd like to remind you to register for the Gordon Research Conference on Diffraction Methods to be held at Bates College in Lewiston, Maine, July 17th-22nd 2016. The conference is themed around "Probing the structure and dynamics of macromolecules" and details of the program are at https://www.grc.org/programs.aspx?id=11655. The closing date for applications is June 19th 2016, about 5 weeks away, however GRC conferences have a limited number of participants and we will close registration early if that number is reached. Please join us in Maine this summer for the 40th anniversary of this meeting. If you are planning on attending, please note the deadline, and the growing potential that registration may close earlier. Thanks, Eddie Snell and Arwen Pearson - Chair and co-chair for 2016. Edward Snell Ph.D. CEO Hauptman-Woodward Medical Research Institute Assistant Prof. Department of Structural Biology, University at Buffalo 700 Ellicott Street, Buffalo, NY 14203-1102 Phone: (716) 898 8631 Fax: (716) 898 8660 Skype: eddie.snell Email: esnell(a)hwi.buffalo.edu Heisenberg was probably here!

1 0

rosetta_refine connecting non-consecutive residues around break in chain
by wtempel 27 May '16

27 May '16

Hello, can one prevent rosetta_refine from connecting two residues that surround a gap? For example, how do I keep near-by residues 108 and 115 apart when 109 through 114 are missing? Thank you. Wolfram Tempel

2 1

Fwd: Re: Scultor model with gaps included
by Gabor Bunkoczi 26 May '16

26 May '16

Apologies, this should have been directed to the mailing list. Gabor -------- Original Message -------- Subject: Re: [phenixbb] Scultor model with gaps included Date: 2016-05-25 14:33 From: Gabor Bunkoczi <gb360(a)cam.ac.uk> To: Joseph Brock <joseph.brock(a)ki.se> Dear Joseph, apologies for the late response, and sorry for the trouble. Please find some answers inlined. On 2016-05-24 15:10, Joseph Brock wrote: > Dear Phenix community, > > I was hoping if someone could help me with using Phaser correctly, > since I can't seem to produce the desired search model. > > The first thing that I was wondering about is that the CLUSTAL > alignment from the log file is quite different to the .aln alignment I > made with phenix --> other tools --> multiple sequence alignment. Why > is a sequence alignment required as input if sculptor performs it's > own internally? Sculptor can perform sequence alignment, but the algorithm is relatively basic, and you can get much better results with an external method (such as HHPRED), and hence alignment input is preferred over the target sequence. The alignment selected is printed into the logfile for reference. On the other hand, Sculptor does align the structure of your model chain to the sequence of your model (this is a surprisingly non-trivial task). However, this alignment should be close to 100% identical, unless a mistake has been made (such as using the wrong alignment file). You should get a warning if the sequence identity is too low. It is normally OK to have a couple of mismatches (such as having SeMet in the model structure with translates to "X" and not as "C"). > > My model sequence aligned to my target sequence in the log file has > several gaps in the alignment . For e.g., > > MASTER ......AASFIMV...... > CHAIN_A ......AKM--MF....... > > I would like to great a search model in which the residues aligned to > gaps in the MASTER chain are included, however the resulting sculptor > .pdb file has these residues removed. Shouldn't they be inserted so > that the rest of the chain is in the correct register? You need to do homology modelling to achieve this, as an insertion can affect the whole structure. Sculptor is designed for quick model improvement, and just renumbers/renames residues. However, the new residues numbers should reflect your sequence, i.e. in your example alignment the two methionines on both sides of the gap will get a non-consecutive number and are displayed as non-bonded in e.g. Coot. > > If anyone can let me know the parameters to allow this, I would > greatly appreciate it. I tried unselecting 'gap' in main-chain > deletion scope and some other variations, but this didn't seem to > help. > > I seem to get the same result even if I change the target index from 1 > to 2 in the associated .aln alignment. Does anyone know why this is? Hmm, this does not sound right. Can you send me the logfile so that I can have a look (please use my direct email address)? Best wishes, Gabor > > Apologies if this is quite obvious, I have been reading the > documentation but can't seem to figure it out. > > All the best, > > Joseph. > > Joseph Brock | PhD > Division of Physiological Chemistry II > Department of Medical Biochemistry and Biophysics > Karolinska Institutet > Scheeles väg 2 > SE-171 77 Stockholm, Sweden > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://phenix-online.org/mailman/listinfo/phenixbb > Unsubscribe: phenixbb-leave(a)phenix-online.org -- ################################################## Dr Gabor Bunkoczi Cambridge Institute for Medical Research Wellcome Trust/MRC Building Addenbrooke's Hospital Hills Road Cambridge CB2 0XY ##################################################

1 0

Appropriate model_vs_data usage over part of a structure
by Andy Watkins 25 May '16

25 May '16

Perhaps necessary preface: I am largely learning as I go, and large parts of Phenix (and the details of refinement data file formats) are still black boxes for me. Suppose I have a model of one chain of a complex and an .mtz describing the entire complex. I have performed some refinement procedure altering the model of that single chain. My aim is to determine how this refinement procedure has affected the fit to the experimental data--or, really, the subset of the experimental data expected to be relevant for my model. For obvious reasons, phenix.model_vs_data chain_A.pdb whole_complex.mtz phenix.model_vs_data chain_A_refined.pdb whole_complex.mtz are undesirable: they evaluate the model of a single chain against the whole complex's data, and there's obviously a lot of unsatisfied electron density. So, while this command *works*, it reports an unrepresentative fit. (In theory, one solution to my problem would be to re-combine each chain's refined version, then run model_vs_data on the recombined, refined complex. I'm interested nonetheless in how it would work on the chains separately. Now, during the refinement procedure, we of course generate .ccp4 density maps for the individual chain models: phenix.maps chain_A.pdb whole_complex.mtz which produces the ccp4 file as well as, crucially, chain_A_map_coeffs.mtz. Attempting to employ that resulting .mtz file, i.e. phenix.model_vs_data chain_A.pdb whole_complex.mtz phenix.model_vs_data chain_A_refined.pdb whole_complex.mtz leads to an evocative error: Sorry_No_array_of_the_required_type: No reflection arrays available. My highest suspicion is that I need to alter maps.params in a particular way so that reflection arrays are also output to model_map_coeffs.mtz. I could also imagine that I need to be using another program entirely! Thanks in advance for whatever help you can provide; unfortunately, I can't provide any input files.

4 7

July ACA meeting in Denver early registration still open!
by Terwilliger, Thomas Charles 24 May '16

24 May '16

?Hi Phenix colleagues! Heading to Denver for ACA's Annual Meeting in July? Early registration ends May 31 (abstracts still being accepted too!) See: http://www.amercrystalassn.org/2016-meeting-homepage ?All the best, Tom T Tom Terwilliger (2016 ACA President)

1 0

Scultor model with gaps included
by Joseph Brock 24 May '16

24 May '16

Dear Phenix community, I was hoping if someone could help me with using Phaser correctly, since I can't seem to produce the desired search model. The first thing that I was wondering about is that the CLUSTAL alignment from the log file is quite different to the .aln alignment I made with phenix --> other tools --> multiple sequence alignment. Why is a sequence alignment required as input if sculptor performs it's own internally? My model sequence aligned to my target sequence in the log file has several gaps in the alignment . For e.g., MASTER ......AASFIMV...... CHAIN_A ......AKM--MF....... I would like to great a search model in which the residues aligned to gaps in the MASTER chain are included, however the resulting sculptor .pdb file has these residues removed. Shouldn't they be inserted so that the rest of the chain is in the correct register? If anyone can let me know the parameters to allow this, I would greatly appreciate it. I tried unselecting 'gap' in main-chain deletion scope and some other variations, but this didn't seem to help. I seem to get the same result even if I change the target index from 1 to 2 in the associated .aln alignment. Does anyone know why this is? Apologies if this is quite obvious, I have been reading the documentation but can't seem to figure it out. All the best, Joseph. Joseph Brock | PhD Division of Physiological Chemistry II Department of Medical Biochemistry and Biophysics Karolinska Institutet Scheeles väg 2 SE-171 77 Stockholm, Sweden

1 0

Senior Research Assistant position - MD Anderson Cancer Center
by Leonard,Paul 23 May '16

23 May '16

Dear all, This post is to bring your attention to a job opportunity for a Senior Research Assistant position at the University of Texas, MD Anderson Cancer Center (in Houston, Texas, USA). MD Anderson Cancer Center is the number one cancer center in the United States and a center of excellence for both oncology treatment and research. This is an opportunity to join a dedicated team of researchers that are working together to develop new cancer therapeutics to positively impact the lives of our patients. We are looking for a highly motivated individual with experience in molecular biology and protein production to work within our structural biology team to support research projects across the MD Anderson research community and the drug discovery pipeline of the Institute for Applied Cancer Science. The research that stems from the proteins produced has a direct impact on the lives of our patients. Salaries are competitive and based on the level of experience of the applicant. We are looking for applicants with a Bachelors or Masters degree in Biochemistry, Biotechnology, Pharmacology or a related subject. Previous experience working in a research lab environment is desired. The ideal candidate will have previous molecular biology or protein purification experience. For more information and to submit a job application please refer to the job posting… https://mdanderson.referrals.selectminds.com/jobs/sr-research-asst-genomic-… We look forward to reviewing your application. Please use the above link to submit your application, CV and cover letter. Best wishes, Paul Leonard The information contained in this e-mail message may be privileged, confidential, and/or protected from disclosure. This e-mail message may contain protected health information (PHI); dissemination of PHI should comply with applicable federal and state laws. If you are not the intended recipient, or an authorized representative of the intended recipient, any further review, disclosure, use, dissemination, distribution, or copying of this message or any attachment (or the information contained therein) is strictly prohibited. If you think that you have received this e-mail message in error, please notify the sender by return e-mail and delete all references to it and its contents from your systems.

3 2