- phenixbb - phenix-online.org

Re: [phenixbb] Phenix crashes
by Katya Heldwein 11 Sep '09

11 Sep '09

Nat, 1.4-160 works just fine. Thank you. Katya Ekaterina Heldwein, Ph.D. Assistant Professor Department of Molecular Biology and Microbiology Tufts University School of Medicine 136 Harrison Ave Boston, MA 02111 phone: 617-636-0858 fax: 617-636-0337 e-mail: katya.heldwein(a)tufts.edu phenixbb-request(a)phenix-online.org wrote: > Send phenixbb mailing list submissions to > phenixbb(a)phenix-online.org > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.phenix-online.org/mailman/listinfo/phenixbb > or, via email, send a message with subject or body 'help' to > phenixbb-request(a)phenix-online.org > > You can reach the person managing the list at > phenixbb-owner(a)phenix-online.org > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of phenixbb digest..." > > > Today's Topics: > > 1. Phenix crashes (Katya Heldwein) > 2. Re: Phenix crashes (sbiswas2(a)ncsu.edu) > 3. Re: Phenix crashes (Nathaniel Echols) > 4. Re: Phenix crashes (Nathaniel Echols) > 5. specifying column labels for input MTZ file > (Tirumala Kumar Chowdary) > 6. Re: specifying column labels for input MTZ file > (Schubert, Carsten [PRDUS]) > 7. Re: specifying column labels for input MTZ file (Pavel Afonine) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 09 Sep 2009 12:02:36 -0400 > From: Katya Heldwein <Katya.Heldwein(a)tufts.edu> > Subject: [phenixbb] Phenix crashes > To: phenixbb(a)phenix-online.org > Message-ID: <20090909120236.c2mlsf9lww00kwsk(a)webmail.tufts.edu> > Content-Type: text/plain; charset=ISO-8859-1; format="flowed" > > Hi, > > I am running phenix-1.4-159 on an Intel Mac. I get the following error: > > Bus error (Python call stack above) > This crash may be due to a problem in any imported > Python module, including modules which are not part > of the cctbx project. To disable the traps leading > to this message, define these environment variables > (e.g. assign the value 1): > BOOST_ADAPTBX_FPE_DEFAULT > BOOST_ADAPTBX_SIGNALS_DEFAULT > This will NOT solve the problem, just mask it, but > may allow you to proceed in case it is not critical. > > If I fix it by > > setenv BOOST_ADAPTBX_FPE_DEFAULT 1 > > I still get the same error. > > If I also do > > setenv BOOST_ADAPTBX_SIGNALS_DEFAULT 1 > > I don't get the error but phenix crashes nonetheless. > > How do I get around this problem? > > Thanks, > > Katya > > > > > ------------------------------ > > Message: 2 > Date: Wed, 9 Sep 2009 12:17:36 -0400 (EDT) > From: sbiswas2(a)ncsu.edu > Subject: Re: [phenixbb] Phenix crashes > To: "PHENIX user mailing list" <phenixbb(a)phenix-online.org> > Message-ID: <1476.152.1.132.71.1252513056.squirrel(a)webmail.ncsu.edu> > Content-Type: text/plain;charset=iso-8859-1 > > Hi, > This looks like a version problem, try installing the latest nightly builds. > Shya > > > >> Hi, >> >> I am running phenix-1.4-159 on an Intel Mac. I get the following error: >> >> Bus error (Python call stack above) >> This crash may be due to a problem in any imported >> Python module, including modules which are not part >> of the cctbx project. To disable the traps leading >> to this message, define these environment variables >> (e.g. assign the value 1): >> BOOST_ADAPTBX_FPE_DEFAULT >> BOOST_ADAPTBX_SIGNALS_DEFAULT >> This will NOT solve the problem, just mask it, but >> may allow you to proceed in case it is not critical. >> >> If I fix it by >> >> setenv BOOST_ADAPTBX_FPE_DEFAULT 1 >> >> I still get the same error. >> >> If I also do >> >> setenv BOOST_ADAPTBX_SIGNALS_DEFAULT 1 >> >> I don't get the error but phenix crashes nonetheless. >> >> How do I get around this problem? >> >> Thanks, >> >> Katya >> >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://www.phenix-online.org/mailman/listinfo/phenixbb >> >> > > > > ------------------------------ > > Message: 3 > Date: Wed, 9 Sep 2009 09:37:50 -0700 > From: Nathaniel Echols <NEchols(a)lbl.gov> > Subject: Re: [phenixbb] Phenix crashes > To: PHENIX user mailing list <phenixbb(a)phenix-online.org> > Message-ID: <2C512891-F9F0-40FB-AC0A-FA8C810F65AF(a)lbl.gov> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > On Sep 9, 2009, at 9:02 AM, Katya Heldwein wrote: > >> I am running phenix-1.4-159 on an Intel Mac. I get the following >> error: >> Bus error (Python call stack above) >> >> If I fix it by >> setenv BOOST_ADAPTBX_FPE_DEFAULT 1 >> I still get the same error. >> If I also do >> >> setenv BOOST_ADAPTBX_SIGNALS_DEFAULT 1 >> >> I don't get the error but phenix crashes nonetheless. >> >> How do I get around this problem? >> > > > Which programs are you running, and did you see a stack trace before > the error message? I just noticed the same thing running > phenix.refine from the same installer on my Mac, so it is probably an > undiagnosed bug. > > ------------------- > Nathaniel Echols > Lawrence Berkeley Lab > 510-486-5136 > NEchols(a)lbl.gov > > > > > > ------------------------------ > > Message: 4 > Date: Wed, 9 Sep 2009 09:46:24 -0700 > From: Nathaniel Echols <NEchols(a)lbl.gov> > Subject: Re: [phenixbb] Phenix crashes > To: PHENIX user mailing list <phenixbb(a)phenix-online.org> > Message-ID: <6207C287-B0BB-4A7B-AD8E-2290222334FE(a)lbl.gov> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > On Sep 9, 2009, at 9:17 AM, sbiswas2(a)ncsu.edu wrote: > >> Hi, >> This looks like a version problem, try installing the latest nightly >> builds. >> Shya >> > > > Actually, 1.4-159 was the latest build until ten minutes ago, but I > just checked 1.4-160 and it does not appear to have this problem, so > it's now ready to download. Sorry for the trouble. > > -Nat > > ------------------- > Nathaniel Echols > Lawrence Berkeley Lab > 510-486-5136 > NEchols(a)lbl.gov > > > > > > ------------------------------ > > Message: 5 > Date: Wed, 09 Sep 2009 14:10:27 -0400 > From: Tirumala Kumar Chowdary <Tirumala.Chowdary(a)tufts.edu> > Subject: [phenixbb] specifying column labels for input MTZ file > To: phenixbb(a)phenix-online.org > Message-ID: <20090909141027.belblmob7s4s440w(a)webmail.tufts.edu> > Content-Type: text/plain; charset=ISO-8859-1; format="flowed" > > Hi, > > I am trying to run phenix.refine with a sharp output MTZ file (column > labels H K L NUMORB FB PHIB FOM HX HY FH PHIH FP SIGFP HLA HLB HLC HLD > HL0 Fcent PHIcent FOMcent Fmap PHImap FHref PHIHref Fav SIGFav). > > Phenix.refine stopped at > > 'Multiple equally suitable arrays of observed xray data found. > > Possible choices: > sharp_sad_se_eden.mtz:FP,SIGFP > sharp_sad_se_eden.mtz:Fav,SIGFav > > Please use refinement.input.xray_data.labels' > > Can someone tell me on how to use this > 'refinement.input.xray_data.labels' and how to specify which column > labels to use. There is nothing written in the documentation about it. > > Thanks > Tirumal > > > > > > > ------------------------------ > > Message: 6 > Date: Wed, 9 Sep 2009 14:22:40 -0400 > From: "Schubert, Carsten [PRDUS]" <CSCHUBER(a)its.jnj.com> > Subject: Re: [phenixbb] specifying column labels for input MTZ file > To: "PHENIX user mailing list" <phenixbb(a)phenix-online.org> > Message-ID: > <204D6E1BD9ACEA40B3F76FE9C125528F035DE9FF(a)JNJUSSHGMS01.na.jnj.com> > Content-Type: text/plain; charset="us-ascii" > > Tirumal: > > refinement.input.xray_data.labels="FP,SIGFP" > > should do the trick. > > Cheers, > > Carsten > > > >> -----Original Message----- >> From: phenixbb-bounces(a)phenix-online.org [mailto:phenixbb- >> bounces(a)phenix-online.org] On Behalf Of Tirumala Kumar Chowdary >> Sent: Wednesday, September 09, 2009 2:10 PM >> To: phenixbb(a)phenix-online.org >> Subject: [phenixbb] specifying column labels for input MTZ file >> >> Hi, >> >> I am trying to run phenix.refine with a sharp output MTZ file (column >> labels H K L NUMORB FB PHIB FOM HX HY FH PHIH FP SIGFP HLA HLB HLC >> > HLD > >> HL0 Fcent PHIcent FOMcent Fmap PHImap FHref PHIHref Fav SIGFav). >> >> Phenix.refine stopped at >> >> 'Multiple equally suitable arrays of observed xray data found. >> >> Possible choices: >> sharp_sad_se_eden.mtz:FP,SIGFP >> sharp_sad_se_eden.mtz:Fav,SIGFav >> >> Please use refinement.input.xray_data.labels' >> >> Can someone tell me on how to use this >> 'refinement.input.xray_data.labels' and how to specify which column >> labels to use. There is nothing written in the documentation about it. >> >> Thanks >> Tirumal >> >> >> >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://www.phenix-online.org/mailman/listinfo/phenixbb >> > > > > > ------------------------------ > > Message: 7 > Date: Wed, 09 Sep 2009 11:24:46 -0700 > From: Pavel Afonine <PAfonine(a)lbl.gov> > Subject: Re: [phenixbb] specifying column labels for input MTZ file > To: PHENIX user mailing list <phenixbb(a)phenix-online.org> > Cc: Tirumala.Chowdary(a)tufts.edu > Message-ID: <4AA7F2EE.6080106(a)lbl.gov> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > Hi Tirumala, > > I agree, you are not the first who confused by this and an example right > in the message would help. > > First, your MTZ file contains the following data: (FP,SIGFP) and > (Fav,SIGFav) and it is your choice to select the one that you want to > use in refinement. > > Second, once decided on the data - for example it is FP, then just add > to your command line this: > > refinement.input.xray_data.labels=FP > > or, which is the same > > xray_data.labels="FP,SIGFP" > > Pavel. > > > > On 9/9/09 11:10 AM, Tirumala Kumar Chowdary wrote: > >> Hi, >> >> I am trying to run phenix.refine with a sharp output MTZ file (column >> labels H K L NUMORB FB PHIB FOM HX HY FH PHIH FP SIGFP HLA HLB HLC HLD >> HL0 Fcent PHIcent FOMcent Fmap PHImap FHref PHIHref Fav SIGFav). >> >> Phenix.refine stopped at >> >> 'Multiple equally suitable arrays of observed xray data found. >> >> Possible choices: >> sharp_sad_se_eden.mtz:FP,SIGFP >> sharp_sad_se_eden.mtz:Fav,SIGFav >> >> Please use refinement.input.xray_data.labels' >> >> Can someone tell me on how to use this >> 'refinement.input.xray_data.labels' and how to specify which column >> labels to use. There is nothing written in the documentation about it. >> >> Thanks >> Tirumal >> >> >> >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://www.phenix-online.org/mailman/listinfo/phenixbb >> >> > > > ------------------------------ > > _______________________________________________ > phenixbb mailing list > phenixbb(a)phenix-online.org > http://www.phenix-online.org/mailman/listinfo/phenixbb > > > End of phenixbb Digest, Vol 46, Issue 14 > **************************************** >

4 4

run autosol with rough phases from shelx?
by Francis E Reyes 10 Sep '09

10 Sep '09

Hi all Is it possible to input the phs file from a shelx run into an autosol run for some phase improvement with solve/resolve?? I tried putting in the HA sites but then the resultant map is worse. Also what are acceptable skews for low resolution phasing (worse than 4A) ? I understand the docs say 0.1 but does that also apply for low res? Thanks FR --------------------------------------------- Francis Reyes M.Sc. 215 UCB University of Colorado at Boulder gpg --keyserver pgp.mit.edu --recv-keys 67BA8D5D 8AE2 F2F4 90F7 9640 28BC 686F 78FD 6669 67BA 8D5D

1 0

Phenix crashes
by Katya Heldwein 10 Sep '09

10 Sep '09

Hi, I am running phenix-1.4-159 on an Intel Mac. I get the following error: Bus error (Python call stack above) This crash may be due to a problem in any imported Python module, including modules which are not part of the cctbx project. To disable the traps leading to this message, define these environment variables (e.g. assign the value 1): BOOST_ADAPTBX_FPE_DEFAULT BOOST_ADAPTBX_SIGNALS_DEFAULT This will NOT solve the problem, just mask it, but may allow you to proceed in case it is not critical. If I fix it by setenv BOOST_ADAPTBX_FPE_DEFAULT 1 I still get the same error. If I also do setenv BOOST_ADAPTBX_SIGNALS_DEFAULT 1 I don't get the error but phenix crashes nonetheless. How do I get around this problem? Thanks, Katya

3 3

question about pick water in autobuild
by crystallogrphy 09 Sep '09

09 Sep '09

Hi, I am building a model against a 2.1A data set using phenix.autobuild. Right now Rfree is about 35%. I do not want to pick water in this stage because I see denisty at N-terminal of my model which need to build more residues. However, the program still picks water even after I say 'place_waters=False'. Does anyone know why? phenix.autobuild data=exptl_fobs_phases_freeR_flags.mtz model=AutoBuild_run_4_/overall_best-090905a.pdb seq_file=../ztb-sd.seq refinement.place_waters=False refinement.refine_with_ncs=True nproc=2

5 6

RuntimeError
by Young-Jin Cho 09 Sep '09

09 Sep '09

Hi everyone, while I was running phenix, I got the following error message. Could some one give me any tips to deal with such this problem? Thanks in advace, YoungJin Traceback (most recent call last): File "/home/yjcho2/Phenix/phenix-1.4-95/phenix/phenix/command_line/refine.py", line 19, in <module> command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/home/yjcho2/Phenix/phenix-1.4-95/phenix/phenix/refinement/command_line.py", line 68, in run log=log) File "/home/yjcho2/Phenix/phenix-1.4-95/phenix/phenix/refinement/command_line.py", line 227, in __init__ self.pdb_file_names) File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/mmtbx/utils.py", line 876, in process_pdb_files raw_records = raw_records) File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/mmtbx/utils.py", line 907, in _process_pdb_file log = self.log) File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/mmtbx/monomer_library/pdb_interpretation.py", line 2912, in __init__ log=log) File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/mmtbx/monomer_library/pdb_interpretation.py", line 1962, in __init__ self.site_symmetry_table().special_position_indices() File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/mmtbx/monomer_library/pdb_interpretation.py", line 2217, in site_symmetry_table sites_cart=self.sites_cart) File "/home/yjcho2/Phenix/phenix-1.4-95/cctbx_project/cctbx/crystal/__init__.py", line 394, in site_symmetry_table assert_min_distance_sym_equiv=self.assert_min_distance_sym_equiv()) RuntimeError: cctbx Error: site_symmetry: min_distance_sym_equiv too large. --

2 1

Re: [phenixbb] question about pick water in autobuild
by Thomas C. Terwilliger 08 Sep '09

08 Sep '09

Hi Qun, With your command you need to add one more keyword to get rid of all the waters: place_waters_in_combine=False I'm sorry that doesn't happen automatically if you say place_waters=False ...I will make that happen in the future. Note however that these waters should not interfere with building...as waters are always deleted prior to building model. I note also that your command does not add new residues; it only adjusts the ones that are there. To build new model add: rebuild_in_place=False All the best, -Tom T >> Hi, >> >> from what you explain, the main issue I see here is that the model building program does not treat water simply as density peaks, and so removes them (waters) if necessary to build a protein chain instead. >> >> Otherwise, it's probably a good idea in general to fill in all unmodeled >> places with some placeholders like water, or probably isolated N atoms would work even better (if I recall correctly). >> >> Pavel. >> >> >> On 9/7/09 6:18 AM, crystallogrphy wrote: >>> Hi, Pavel: >>> The problem here is that autobuild placed waters into the densities where they are the N-terminal residues. Without the waters here, autobuild will build residues, not waters, to decrease R and Rfree with less model bias. Now with water picking, autobuild does not build more residues, just water. >>> I still do not know why 'place_waters=False' cannot work. Tom has not given me the answer yet. >>> On Mon, Sep 7, 2009 at 1:45 AM, Pavel Afonine <PAfonine(a)lbl.gov <mailto:[email protected]>> wrote: >>> Hi, >>> I hope Tom gives you the answer about how to stop water picking in autobuild. >>> From my side, I'm wondering why it bothers you (I'm not saying that not working option is good)? Why don't you consider those waters as a tool for improving your map? You are free to remove any of them them later on. This can be viewed as a prototype of what ARP/wARP does, or other "density growing" techniques... In your case you just temporarily place waters where the model is still absent, and when you build those missing places just consider waters as density peaks (I hope model building programs assume waters as just density peaks and remove waters if they are on the macromolecule's way). On the other hand, model >>> incompleteness may make the map ugly even for relatively well defined places. >>> Pavel. >>> On 9/6/09 7:38 AM, crystallogrphy wrote: >>>> Hi, >>>> I am building a model against a 2.1A data set using >>>> phenix.autobuild. Right now Rfree is about 35%. I do not want to pick water in this stage because I see denisty at N-terminal of my model which need to build more residues. However, the program still picks water even after I say 'place_waters=False'. Does anyone know why? >>>> phenix.autobuild data=exptl_fobs_phases_freeR_flags.mtz >>>> model=AutoBuild_run_4_/overall_best-090905a.pdb >>>> seq_file=../ztb-sd.seq refinement.place_waters=False >>>> refinement.refine_with_ncs=True nproc=2 >>>> ------------------------------------------------------------------------ _______________________________________________ >>>> phenixbb mailing list >>>> phenixbb(a)phenix-online.org <mailto:[email protected]> http://www.phenix-online.org/mailman/listinfo/phenixbb >>

1 0

about kick map generation
by crystallogrphy 05 Sep '09

05 Sep '09

Hi, I am generating a averaged kick maps with the following script. According to the script, there should be both kick map and normal 2fofc maps. However, there is only one map files created. I am not sure it is kick map or routine 2fofc map. Does anyone knows? electron_density_maps { map_format = *xplor map_coefficients_format = *mtz phs suppress = None map { mtz_label_amplitudes = "2FOFCWT" mtz_label_phases = "PH2FOFCWT" likelihood_weighted = True obs_factor = 2 calc_factor = 1 kicked = False fill_missing_f_obs_with_weighted_f_model = True } map { mtz_label_amplitudes = "FOFCWT" mtz_label_phases = "PHFOFCWT" likelihood_weighted = True obs_factor = 1 calc_factor = 1 kicked = False fill_missing_f_obs_with_weighted_f_model = True } map { mtz_label_amplitudes = "2FOFCWT_kick" mtz_label_phases = "PH2FOFCWT_kick" likelihood_weighted = True obs_factor = 2 calc_factor = 1 kicked = True fill_missing_f_obs_with_weighted_f_model = False } map { mtz_label_amplitudes = "FOFCWT_kick" mtz_label_phases = "PHFOFCWT_kick" likelihood_weighted = True obs_factor = 1 calc_factor = 1 kicked = True fill_missing_f_obs_with_weighted_f_model = False } map { mtz_label_amplitudes = "2FOFCWT_no_fill" mtz_label_phases = "PH2FOFCWT_no_fill" likelihood_weighted = True obs_factor = 2 calc_factor = 1 kicked = False fill_missing_f_obs_with_weighted_f_model = False } map { mtz_label_amplitudes = "FOFCWT_no_fill" mtz_label_phases = "PHFOFCWT_no_fill" likelihood_weighted = True obs_factor = 1 calc_factor = 1 kicked = False fill_missing_f_obs_with_weighted_f_model = False } anomalous_difference_map { mtz_label_amplitudes = "ANOM" mtz_label_phases = "PHANOM" } grid_resolution_factor = 0.25 region = *selection cell atom_selection = None atom_selection_buffer = 3 apply_sigma_scaling = True apply_volume_scaling = False }

2 1

assertion error with autobuild (phenix 1.4.3)
by Jan Stout 04 Sep '09

04 Sep '09

Dear, I am trying to run the Autobuild Wizard to make a iterative-build omit map. I get the following errors after running Autobuild using the input file autobuild.eff generated by the wizard itself. I am working with phenix 1.4.3. Any input will be greatly appreciated. Many thanks, Jan Stout Traceback (most recent call last): File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/command_line/autobuild.py", line 339, in <module> run_autobuild=run_autobuild(args=sys.argv[1:]) File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/wizard_command_line.py", line 598, in __init__ self.RunWizard() File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/wizard_command_line.py", line 973, in RunWizard self.runWizard.run() File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/wizard_command_line.py", line 230, in run self.Wizard.Run(info='script') File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/AutoBaseExtend.py", line 726, in Run ok=self.CollectInputs()# raises AssertionError on failure File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/AutoBaseExtend.py", line 1790, in CollectInputs getattr(self,"finish_"+str(self.application_method))() File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/wizards/AutoBuild.py", line 1074, in finish_AutoBuild_start all_files_ok=self.finish_Build_start() File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/BuildBase.py", line 382, in finish_Build_start all_files_ok=self.Build_finish_up_start() File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/BuildBase.py", line 508, in Build_finish_up_start str(self.Facts['input_data_file'])+"'") File "/usr/local/PHENIX/phenix-1.4.3/phenix-1.4-3/phenix/phenix/autosol/UserMethods.py", line 84, in Error raise AssertionError,self.ErrorLine AssertionError: Sorry, cannot find the input_data_file ''

2 1

question about phenix.refine
by crystallogrphy 04 Sep '09

04 Sep '09

Hi, I want to use phenix to refine a model right after autobuild with the following script: phenix.refine xray_data.file_name=exptl_fobs_phases_freeR_flags.mtz overall_best-090903a.pdb strategy=rigid_body+individual_sites simulated_annealing=true simulated_annealing.start_temperature=8000 sites.rigid_body="chain A" sites.rigid_body="chain B" However, the program says " F-obs: exptl_fobs_phases_freeR_flags.mtz:FP,SIGFP If previously used R-free flags are available run this command again with the name of the file containing the original flags as an additional input. If the structure was never refined before, or if the original R-free flags are unrecoverable, run this command again with the additional definition: refinement.input.xray_data.r_free_flags.generate=True when I use phenix.mtz.dump exptl_fobs_phases_freeR_flags.mtz, it indicates that it has FreeR_flag=1. Can anyone tell me why there is FreeR_flag in my data, while the refinement program does not recognize it? label #valid %valid min max type H 35619 100.00% 0.00 22.00 H: index h,k,l K 35619 100.00% 0.00 45.00 H: index h,k,l L 35619 100.00% -33.00 33.00 H: index h,k,l FP 35619 100.00% 0.00 114.22 F: amplitude SIGFP 35619 100.00% 0.15 6.13 Q: standard deviation PHIM 35619 100.00% 0.00 0.00 P: phase angle in degrees FOMM 35619 100.00% 0.00 0.00 W: weight (of some sort) FreeR_flag 35619 100.00% 0.00 1.00 I: integer FC 35619 100.00% 0.00 0.00 F: amplitude

2 1

target omit map
by Susan Tsutakawa 04 Sep '09

04 Sep '09

I am trying to generate a simulated annealing omit map of a Mg-water cluster in the active site of my protein but when I run the SA omit map, I can only see the Mg when I use the Mgwater cluster as the target pdb. When I was building the model which did not have the metal present (phases solved by MR), I observed this Mg-water cluster in the Fo-Fc maps. Geometry and distance were ideal, etc. Now that I'm at the final stages of refinement, I would like to do a SA omit map as a figure for the paper. However, if I goto the lowest sigma, I only see the Mg. I'm using coot with the weights included to view the SA omit maps. I noticed that there is very little noise at the lowest sigma and so I'm wondering if the 0 sigma is truly 0 sigma and any suggestions on what to do. Thank you in advance. Sincerely, Susan

2 1