- phenixbb - phenix-online.org

distance threshold for special positions?
by Alastair Fyfe 31 Jul '13

31 Jul '13

I'd be grateful for pointers to documentation/source regarding phenix.refine's criterion for flagging an atom's coordinates as coinciding with a special position. For shelxl I noticed a distance cutoff of 0.02 to the symmetry equivalent position seems adequate for the data I'm working with. For phenix.refine the threshold is higher but I haven't found documentation for the cutoff used. thanks, Alastair Fyfe

2 1

proteins sequence for phenix
by LISA 26 Jul '13

26 Jul '13

Dear All, Phenix will ask for the protein sequence when we create a new project. I try to solve my complex by the Autosol in phenix with proteins sequence. My complex contains 2 molecule A and 3 molecule B. How can I give the sequence in phenix? will it should be: >A .................................................................................................................. >B .............................................................................................................................. or >A .................................................................................................................. >A .................................................................................................................. >B .............................................................................................................................. >B .............................................................................................................................. >B .............................................................................................................................. Thank you. Lisa

3 2

Re: [phenixbb] On Mac two separate installations?
by Joseph Noel 26 Jul '13

26 Jul '13

Thanks Nat! I am trying out the new "Featured Enhanced Map" option. Preliminary analysis says it really helps! Also, following the protocol as outlined by Andy Karplus in his Science paper on data processing using data extending to CC1/2's near 0.2. Both together seem to really extend the resolution of my datasets and also improve refinement! ______________________________________________________________________________________ Joseph P. Noel, Ph.D. Arthur and Julie Woodrow Chair Investigator, Howard Hughes Medical Institute Professor, The Jack H. Skirball Center for Chemical Biology and Proteomics The Salk Institute for Biological Studies 10010 North Torrey Pines Road La Jolla, CA 92037 USA Phone: (858) 453-4100 extension 1442 Cell: (858) 349-4700 Fax: (858) 597-0855 E-mail: noel(a)salk.edu Publications & Citations: http://scholar.google.com/citations?user=xiL1lscAAAAJ Homepage Salk: http://www.salk.edu/faculty/noel.html Homepage HHMI: http://hhmi.org/research/investigators/noel.html ______________________________________________________________________________________

6 7

Fwd: Course on “Structure and Function of Membrane Proteins- a multidisciplinary approach”
by Nathaniel Echols 26 Jul '13

26 Jul '13

---------- Forwarded message ---------- From: Jose Artur Brito <jbrito(a)itqb.unl.pt> To: phenixbb(a)phenix-online.org Date: Fri, 26 Jul 2013 15:58:01 +0100 Subject: Course on “Structure and Function of Membrane Proteins- a multidisciplinary approach” Dear colleagues, We would like to announce the Instruct-sponsored 4-day course “Structure and Function of Membrane Proteins- a multidisciplinary approach”, to be held at ITQB, Oeiras (nearby Lisbon), Portugal, from 5 to 8 November 2013. The course will address several techniques for the structural and functional characterization of membrane proteins, with special emphasis on Macromolecular Crystallography, Mass Spectrometry, Electron Microscopy and Nuclear Magnetic Ressonance. The information provided by each technique, their applications in biological systems, major benefits and limitations will be discussed. The course is organized with lectures in the mornings and interactive tutorials in the afternoons. In addition, the selected applicants are grouped and each group works on a case study (based on 2-3 papers covering techniques of interest and a questionnaire) and gives a presentation at the end of the course. The course is aimed primarily at PhD students, young Post-Doctoral researchers and others with research activities involving structural biology of membrane proteins. Participants will be limited to 20. Candidate selection will be based on a short CV, a motivation letter from the applicant, and a recommendation letter from the supervisor. Registration deadline is September 16, please send your application to membstruct2013(a)itqb.unl.pt . More information can be found at http://www.itqb.unl.pt/membstruct2013 The organizing commission, Margarida Archer (ITQB-UNL), Carlos Cordeiro (FC-UL) and José A. Brito (ITQB-UNL) -- ************************************************ * José Artur Brito, PhD * * * * Post-Doctoral Fellow * * Membrane Protein Crystallography Lab * * Instituto de Tecnologia Química e Biológica * * Oeiras - Portugal * * * * Tel.: +351.21.446.97.61 * * Fax: +351.21.443.36.44 * * * * E-mail: jbrito(a)itqb.unl.pt * * URL: http://mx.itqb.unl.pt * ************************************************

1 0

Linux distribution question: who needs the FC3 build?
by Nathaniel Echols 25 Jul '13

25 Jul '13

Dear users, We are in the process of rearranging our server room and changing the way we do the nightly builds. One step of this will be retiring the bulky and ancient boxes which run Fedora 3, and standardizing on slightly more modern OSes. (Including Ubuntu-specific builds, as well as the usual Fedora/RedHat/CentOS base.) I know that some people have found that the Fedora 8 x86_64 build does *not* run properly on their systems, but the Fedora 3 build does. Could anyone who has firsthand experience with this please contact me off-list and tell me exactly which distribution and version you are running? We can't cover all possible combinations (sorry Gentoo users), but I'd like to get some idea what is still problematic. thanks, Nat

2 1

Refinement using a homolog as a reference
by Joshi, Amar (Dr.) 25 Jul '13

25 Jul '13

Hi, I am refining ligand-protein complexes at 3.2Å dataset with a human protein. My Rfree is ~0.34 but my ramachandran stats are concerning me: 85% favoured, 4.5% disallowed. The structure of a yeast homolog has been deposited at 2.4Å resolution. The yeast structure contains additional loops but is ~55% identical to the human protein. The overall conformation between the homologs is very similar. Can I use this as a reference model? Should I prune the reference model? Will different numbering schemes affect the refinement? Many thanks, Amar

4 3

Re: [phenixbb] Linux distribution question: who needs the FC3 build?
by Nathaniel Echols 24 Jul '13

24 Jul '13

On Wed, Jul 24, 2013 at 2:56 PM, Edward A. Berry <BerryE(a)upstate.edu> wrote: > Would that be the end of support for 32-bit linux? Or would you build > i686 version on a later version? (Or is it possible to run 64 bit > executable on 32- bit operating systems with some kind of compatibility > libraries and 64-bit capable hardware?) > > I have one Fc8 32 bit machine which I don't want to upgrade, but I don't > really need to run phenix on it. Just to clarify: we will continue distributing 32-bit Linux indefinitely (although probably on fewer platforms than 64-bit), and we will at least support Fedora 8 at a minimum for a while, since our most important development system is still running it. The question is really related to how ancient a distribution we need to support, and what scenarios are especially difficult for binary cross-compatibility. -Nat

1 0

calculate map from ensemble refinement
by Bard, Joel 23 Jul '13

23 Jul '13

Hi- I ran phenix.ensemble refinement which worked very nicely but crashed during map output. I think this was my fault for using a parameter file that had map_type = None (I didn't look and assumed the default was reasonable). I would like to calculate maps after the fact. Is there a way to run the map calculation on the output ensemble pdb file and reflection data? I tried phenix.maps which choked on the huge ensemble. Thanks, Joel

3 3

Group ADP refinement
by joseph Lyons 23 Jul '13

23 Jul '13

Dear phenixbb. I am currently running phenix 1.8.2-1309. My goal is to use group ADP with 2 b-factors per residue for the protein and individual b-factors for solvent. However, this does not seem to be working even though the system seems to recognise what I want to do. The refinement output gives what looks like individual b-factor refinement... ================== Extract refinement strategy and selections ================= Refinement flags and selection counts: individual_sites = True (4048 atoms) torsion_angles = False (0 atoms) rigid_body = False (0 atoms in 0 groups) individual_adp = True (iso = 127 aniso = 0) group_adp = True (3921 atoms in 967 groups) tls = False (0 atoms in 0 groups) occupancies = False (0 atoms) group_anomalous = False In troubleshooting it appears that with Group ADP with 2 b-factors per residue, the solvent B-factors are not being refined, i.e., remaining at the Wilson B that I set previously. For Group ADP with 1 b-factors per residue - everything appears to refine OK. Any help would be greatly appreciated, Regards, Joe

2 1

Re: [phenixbb] How do I turn off sidechain rotamer fitting? (Pavel Afonine)
by Joseph Noel 23 Jul '13

23 Jul '13

Dear Pavel, To clarify, in the latest nightly build, 1435, do you have to click on real space refinement to carry out side chain rotamer fitting? If you just refine xyz I assume side chain rotamer fitting is not enabled, correct? Joe Noel ______________________________________________________________________________________ Joseph P. Noel, Ph.D. Arthur and Julie Woodrow Chair Investigator, Howard Hughes Medical Institute Professor, The Jack H. Skirball Center for Chemical Biology and Proteomics The Salk Institute for Biological Studies 10010 North Torrey Pines Road La Jolla, CA 92037 USA Phone: (858) 453-4100 extension 1442 Cell: (858) 349-4700 Fax: (858) 597-0855 E-mail: noel(a)salk.edu Publications & Citations: http://scholar.google.com/citations?user=xiL1lscAAAAJ Homepage Salk: http://www.salk.edu/faculty/noel.html Homepage HHMI: http://hhmi.org/research/investigators/noel.html ______________________________________________________________________________________

5 7

Re: [phenixbb] Phenix "hangs" on a Mac?
by Joseph Noel 23 Jul '13

23 Jul '13

Hi Nat, Will replicate and send you the information. Its unrelated to Ramachandran restraints as it occurs intermittantly when doing just regular tasks. I can always tell early as it never seems to get past the first steps of the refinement protocol - in essence - it never starts xyz refinement. Just sits there. I abort and restart and it then goes fine. I'm running Mac OSX 10.8.4 Joe ______________________________________________________________________________________ Joseph P. Noel, Ph.D. Arthur and Julie Woodrow Chair Investigator, Howard Hughes Medical Institute Professor, The Jack H. Skirball Center for Chemical Biology and Proteomics The Salk Institute for Biological Studies 10010 North Torrey Pines Road La Jolla, CA 92037 USA Phone: (858) 453-4100 extension 1442 Cell: (858) 349-4700 Fax: (858) 597-0855 E-mail: noel(a)salk.edu Publications & Citations: http://scholar.google.com/citations?user=xiL1lscAAAAJ Homepage Salk: http://www.salk.edu/faculty/noel.html Homepage HHMI: http://hhmi.org/research/investigators/noel.html ______________________________________________________________________________________

1 0

Post-doc position for SAXS at the MAX IV Laboratory
by Marjolein Thunnissen 23 Jul '13

23 Jul '13

The MAX IV laboratory in Lund has opened a position for a Postdoctoral fellow to strengthen the biological SAXS environment at the current SAXS beam line. The position will be for two years and is embedded in the BIOSTRUCT-X EU program. Full information of the position is available at: http://admin.lu.se/o.o.i.s?id=22598&Dnr=554436&Type=E as well as who to contact for more information. Information about the MAX IV laboratory can be obtained at www.maxlab.lu.se<http://www.maxlab.lu.se> . best regards Marjolein Thunnissen ________________________________________________________________________ Marjolein Thunnissen Phone +46-(0)76-632 0417 Associate Professor Fax +46-(0)46-22 24692 Dept of Biochemistry and Structural Biology, Lund University http://www.mps.lu.se<http://www.mps.lu.se/> PO-Box 124 S-221 00 Lund, Sweden Scientific coordinator MX (The MAX IV Laboratory): I911 and BioMAX ________________________________________________________________________

1 0

Phenix "hangs" on a Mac?
by Joseph Noel 22 Jul '13

22 Jul '13

Has anyone had a problem when using Phenix refine through the GUI on a Mac wherein the program after hitting Run locally starts but then hangs without proceeding? Seems to happen to me about one out of five times I run refine and always hangs when I experiment with ramachandran restraints for only a portion of the polypeptide chain. I've tried letting things alone for several hours and nothing happens. I can abort and then often resubmit and it then runs fine (except for rama restraints). I've found this happens with both nightly builds and stable releases. I am currently running the latest nightly build 1439. ______________________________________________________________________________________ Joseph P. Noel, Ph.D. Arthur and Julie Woodrow Chair Investigator, Howard Hughes Medical Institute Professor, The Jack H. Skirball Center for Chemical Biology and Proteomics The Salk Institute for Biological Studies 10010 North Torrey Pines Road La Jolla, CA 92037 USA Phone: (858) 453-4100 extension 1442 Cell: (858) 349-4700 Fax: (858) 597-0855 E-mail: noel(a)salk.edu Publications & Citations: http://scholar.google.com/citations?user=xiL1lscAAAAJ Homepage Salk: http://www.salk.edu/faculty/noel.html Homepage HHMI: http://hhmi.org/research/investigators/noel.html ______________________________________________________________________________________

3 2

On Mac two separate installations?
by Joseph Noel 22 Jul '13

22 Jul '13

Does one have to install both the GUI and command line installers on a Mac if one wants to have the option of running using the command line (for command line only options in nightly builds) and the GUI? ______________________________________________________________________________________ Joseph P. Noel, Ph.D. Arthur and Julie Woodrow Chair Investigator, Howard Hughes Medical Institute Professor, The Jack H. Skirball Center for Chemical Biology and Proteomics The Salk Institute for Biological Studies 10010 North Torrey Pines Road La Jolla, CA 92037 USA Phone: (858) 453-4100 extension 1442 Cell: (858) 349-4700 Fax: (858) 597-0855 E-mail: noel(a)salk.edu Publications & Citations: http://scholar.google.com/citations?user=xiL1lscAAAAJ Homepage Salk: http://www.salk.edu/faculty/noel.html Homepage HHMI: http://hhmi.org/research/investigators/noel.html ______________________________________________________________________________________

2 1

mr_rosetta pause & resume
by Karolina Michalska 22 Jul '13

22 Jul '13

Hello everybody, Is there a way to pause an mr_rosetta run and resume it with a different number of processors? Thanks, Karolina

3 3

Registration open: "The Future of Microfocus Protein Crystallography"
by Marjolein Thunnissen 22 Jul '13

22 Jul '13

Dear all, I would like to remind you on a workshop on "The Future of Microfocus Protein Crystallography" which will take place at the MAX IV User meeting on the 24th and the 25th of September, 2013, in Lund, Sweden. Recent developments within protein crystallography methods in combination with the possibilities offered by the new upcoming synchrotron sources such as the MAX IV 3 GeV storage ring make possible exciting new ways of carrying out research within structural biology. Small microfocus beamlines with a very high flux and increased coherence will make new types of experimentation possible. The scientific possibilities will be highlighted through a series of talks by experts showing the impact of the new type of X-ray sources and microfocus beamlines on research within structural biology. The new generation of microfocus beamlines will also set a high demand on instrumentation and suitable software. For example, data collection will potentially be very fast (in milliseconds) and radiation damage will allow only a limited amount of data to be collected from each sample. New technical solutions for sample handling and presentation, data processing methods and more will be needed for these types of experiments, and these will also be presented and discussed at the workshop. Confirmed speakers include David Stuart, Daniel Wacker, Simone Weynand, Jens Preben Morth, Tove Sjögren, Richard Neutze, Janet Smith, Alke Meentz, Alexei Soares, Thomas White, Luca Jovine and Clemens Schulze-Briese The workshop is part of a process to obtain an updated proposal for the possible Phase 2b beam line MicroMAX at the upcoming new 3 GeV storage ring of MAX IV in Lund. This workshop should give the user community an opportunity to explore the scientific possibilities of a new generation of microfocus beam lines, but also it will give them the chance to contribute with specific input on their own experimental demands on the beam line. The workshop is part of the MAX IV laboratory user meeting, but there is no requirement to be a user of the facility and all that are interested are welcome . Registration is through the user meeting website: https://indico.maxlab.lu.se/indico/conferenceDisplay.py?confId=0 . The registration fees are 2000 SEK for academics and 700 SEK for junior scientists. Registration fees include all lunches and the conference dinner. Further information on this workshop can be found at https://www.maxlab.lu.se/node/1609 and for the MAX IV user meeting at https://www.maxlab.lu.se/um13 . For the organisers, Richard Neutze, Gunter Schneider and Gregers Rom Andersen Marjolein Thunnissen ________________________________________________________________________ Marjolein Thunnissen Phone +46-(0)76-632 0417 Associate Professor Fax +46-(0)46-22 24692 Dept of Biochemistry and Structural Biology, Lund University http://www.mps.lu.se<http://www.mps.lu.se/> PO-Box 124 S-221 00 Lund, Sweden Scientific coordinator MX (The MAX IV Laboratory): I911 and BioMAX ________________________________________________________________________

1 0

Fo-Fo map
by Xiang Li 21 Jul '13

21 Jul '13

Hi everyone, I am working on two datasets of the similar crystal design. In one of the datasets, there is an extra guest protein (might be considered as a ligand) docked in one unit cell. The two crystals have very similar unit cell size and same symmetry. I want to calculate the Fo-Fo map to see whether I could figure out where the protein is. But I got error says the symmetry of the two datasets are not the same. I have never used the "isomorphous difference map" in GUI before. Can anyone help me to figure out where I did wrong please? I have attached the mtz file that I want to compare. Btw, if the protein is not very rigidly linked with the crystal framework (~2 free residues linkage), am I supposed to see the density of the protein? Or are there any better ways for me to identify the protein? Thanks for your kind help! Sincerely, Xiang

2 2

ADP refinement of cysteinesulfonic acid
by Phillip Steindel 16 Jul '13

16 Jul '13

Hi all- I have a 1.5 Angstrom structure with two cysteines that appear to have oxidized to cysteinesulfonic acid (OCS). I replaced the cysteines in coot, then ran refine with individual and anisotropic ADPs, but the ADPs don't appear to be refining for those residues. The hydrogens are all at 24,and the non-hydrogens are all at 20. I'm running 1.8.2-1309. Thanks, Phillip Steindel Theobald Lab Brandeis University

2 1

cis peptide question
by Edward A. Berry 16 Jul '13

16 Jul '13

I have a cis-peptide in my structure. Phenix recognizes it and .geo file shows this is restrained to 0*: dihedral pdb=" CA ALA A 401 " pdb=" C ALA A 401 " pdb=" N SER A 402 " pdb=" CA SER A 402 " ideal model delta harmonic sigma weight residual 0.00 -1.58 1.58 0 5.00e+00 4.00e-02 1.00e-01 However in statistics printed with the output pdb, I have at least one dihedral that is flagged as off by about 180*: REMARK 3 DEVIATIONS FROM IDEAL VALUES. REMARK 3 RMSD MAX COUNT REMARK 3 DIHEDRAL : 12.902 168.987 3277 ^^^^^^^ Could this be my cis peptide, or do I have a really bad dihedral somewhere else?

3 4

How do I turn off sidechain rotamer fitting?
by Owen Pornillos 15 Jul '13

15 Jul '13

I'm using one of the nightlies - dev 1427. It's not doing very well in combination with NCS. Or what is the most recent nightly that does not have this feature? Many thanks, Owen

2 4

Kicked difference maps
by Ho Leung Ng 12 Jul '13

12 Jul '13

Hi, I am finding that features in kicked difference maps (mFo-DFc) have very different scaling compared to the standard difference maps. For example, a blob that appears in the standard map at 3 sigma might not appear in the kicked map until 5.5 sigma. Is this correct functioning? In contrast, features in the kicked and standard 2mFo-DFc maps are comparable in scale. Thank you, Ho Ho Leung Ng University of Hawaii at Manoa Assistant Professor, Department of Chemistry hng(a)hawaii.edu

2 1

problem with alternate conformations
by George Phillips 11 Jul '13

11 Jul '13

I am trying to adapt my old CNS scripts to to multiple conformer refinements in Phenix, i.e. up to 20 copies of each entire chain. I seem to be OK with up to three copies of the whole chain, but when I try four or more I seem to be in an infinite loop in the 'reduce' phase of a refinement. 3 copies runs in less than hour, even with torsion simulated annealing, with four even overnight the program just runs 'reduce for hours and hours'. This happens on the standard release and development version 1422. Is there some way to turn off hydrogens as a work around? Test files available on request. : ) Thanks for any help! George George N. Phillips, Jr. Ralph and Dorothy Looney Professor Department of Biochemistry and Cell Biology Rice University, MS140 6100 Main Street Houston, Texas 77005-1892 Office: +1 713.348.6951 http://www.bioc.rice.edu/

3 5

2014 Gordon Research Conference and Research Seminars on Diffraction Methods in Structural Biology
by Anastassis Perrakis 11 Jul '13

11 Jul '13

Dear all, In a bit more than a year from now, we will be running the Gordon Research Conference on Diffraction Methods in Structural Biology, this time preceded for the first time by a two-day Gordon Research Seminar, exclusively for young scientists and a few mentors. http://www.grc.org/programs.aspx?year=2014&program=diffrac http://www.grc.org/programs.aspx?year=2014&program=grs_diff We are in the process of inviting the right people to make the schedule as exciting and inviting as possible, hoping we will be able to attract a diverse, enthusiastic, and motivated crowd! At this stage, we would like to ask you for ideas for 1. Specific subjects that are emerging and you would like to see covered, to make it worth your time to join us! 2. Specific people that would be excellent speakers, that would make you attend the Research Conference! 3. Specific people that would be great mentors, that would make you attend the Research Seminars! Many thanks from the team (but please send all replied to me!) Tassos Perrakis (GRC chair), Eddie Snell (GRC vice chair), Jeff Headd (GRS chair) and Maike Bublitz (GRS assoc. chair)

1 0

parallel phenix.phaser on SGE cluster
by L. Costenaro (IBB) 11 Jul '13

11 Jul '13

Hello, I am trying to run phaser in a SGE cluster (qsub) using multiple proc (either phenix.phaser from the command line or phaser-MR from the GUI), but the jobs do not parallelize. When I run the phaser-MR locally (same executable) it does parallelize (multiple python threads). Any help , advice would be welcome. Best regards, Lionel

3 3

Location of Gaussian factors for ED calculation
by Schubert, Carsten [JRDUS] 10 Jul '13

10 Jul '13

Hi, Were in the phenix package can I find the Gaussian factors (scattering table) for calculating the isotropic ED distribution at a given radius of r. I just need that for an illustration. Even better of you could already point me to some plots. Nothing I found online so far was suitable. Thanks Carsten

2 2