- phenixbb - phenix-online.org

Workshop - The Future of Microfocus Protein Crystallography - 24-25 September, 2013, Lund, Sweden
by Marjolein Thunnissen 22 May '13

22 May '13

Dear all, I would like to announce a workshop on "The Future of Microfocus Protein Crystallography" which will take place at the MAX IV User meeting on the 24th and the 25th of September, 2013, in Lund, Sweden. Recent developments within protein crystallography methods in combination with the possibilities offered by the new upcoming synchrotron sources such as the MAX IV 3 GeV storage ring make possible exciting new ways of carrying out research within structural biology. Small microfocus beamlines with a very high flux and increased coherence will make new types of experimentation possible. The scientific possibilities will be highlighted through a series of talks by experts showing the impact of the new type of X-ray sources and microfocus beamlines on research within structural biology. The new generation of microfocus beamlines will also set a high demand on instrumentation and suitable software. For example, data collection will potentially be very fast (in milliseconds) and radiation damage will allow only a limited amount of data to be collected from each sample. New technical solutions for sample handling and presentation, data processing methods and more will be needed for these types of experiments, and these will also be presented and discussed at the workshop. Confirmed speakers include David Stuart, Daniel Wacker, Simone Weynand, Jens Preben Morth, Tove Sjögren, Richard Neutze, Janet Smith, Alke Meentz, Alexei Soares, Thomas White and Clemens Schulze-Briese The workshop is part of a process to obtain an updated proposal for the possible Phase 2b beam line MicroMAX at the upcoming new 3 GeV storage ring of MAX IV in Lund. This workshop should give the user community an opportunity to explore the scientific possibilities of a new generation of microfocus beam lines, but also it will give them the chance to contribute with specific input on their own experimental demands on the beam line. The workshop is part of the MAX IV laboratory user meeting. Registration will be through the user meeting website which will open for registration soon. Further information on this workshop can be found at https://www.maxlab.lu.se/node/1609 and for the MAX IV user meeting at https://www.maxlab.lu.se/um13 . For the organisers, Richard Neutze, Gunter Schneider and Gregers Rom Andersen Marjolein Thunnissen ________________________________________________________________________ Marjolein Thunnissen Phone +46-(0)76-632 0417 Associate Professor Fax +46-(0)46-22 24692 Dept of Biochemistry and Structural Biology, Lund University http://www.mps.lu.se<http://www.mps.lu.se/> PO-Box 124 S-221 00 Lund, Sweden Scientific coordinator MX (The MAX IV Laboratory): I911 and BioMAX ________________________________________________________________________

1 0

depositing pdb files
by Mengbin Chen 21 May '13

21 May '13

Hi Phenix Users, I am going to deposit some pdb files into RCSB, which requires Luzzati plots and a bunch of other things. I don't know how to get these results from Phenix (actually the main problem is luzzati errors, Phenix does not seem to provide them), although SFcheck from CCP4i provides only some of them. I know CNS can do this by model_stats.inp, but that's too much trouble since I have complicated ligands bound. Any suggestions would be appreciated! Thank you in advance, Mengbin -- Mengbin Chen Department of Chemistry University of Pennsylvania

4 5

mr_rosetta: how to continue from recovered mr_protocols.default run
by Christian Becke 21 May '13

21 May '13

Hi, I am trying mr_rosetta on a complex. At the GROUP_OF_ROSETTA_REBUILD stage, my machine ran out of memory and the mr_protocols.default processes were killed. After adding more swap space, I restarted the mr_protocols.default runs (3 parallel jobs, one for each chain) using the scripts RUN_?/WORK_?/run_rebuild.sh, which appear to have finished correctly (i.e., there are 20 pdb files generated for each of the chains). However, I could not figure out how to restart mr_rosetta so that it picks up these models. Any suggestions? Thanks, Christian

2 1

Grid size in max_entropy maps
by Schubert, Carsten [JRDUS] 20 May '13

20 May '13

Is there a way to control the grid size in the maximum entropy maps? The current grid size is quite small, resulting in a very fine mesh. Thanks Carsten

3 5

43rd Mid-Atlantic Macromolecular Crystallography Meeting
by Charles Pemble 11 May '13

11 May '13

*43**rd** Mid-Atlantic Macromolecular Crystallography Meeting* *May 30 – June 1, 2013* *Duke University* *Durham, NC* *ANNOUNCEMENT: *We have extended the deadline for submitting abstracts to be considered for presentations until midnight Sunday, May 12. Registration and details can be found at http://www.mid-atlantic.org. The 43rd Mid-Atlantic Macromolecular Crystallography Meeting, will be held at Duke University in Durham, North Carolina. This year will feature keynote speaker Tom Terwilliger from Los Alamos National Lab, workshops on PHENIX and MolProbity, plus many talks & posters on new and exciting research. The best presentation and poster by a Graduate Student & Postdoctoral Fellow will be awarded (total of 4). We encourage you to submit your abstracts and sign up for the workshops as these are separate processes from registration. *DEADLINES (updated):* Abstract submission for presentation - May 12th Abstract submission for poster - May 27th *No deadline for registration With best wishes on behalf of the primary Organizing Committee, Charlie Pemble _____________________________ Charles W. Pemble IV, Ph.D. Duke University Medical Center 308 Research Drive LSRC, A06 Durham, NC 27708 charles.pemble(a)duke.edu We thank our current sponsors for their generous contributions: Rigaku Americas Corporation, Agilent Technologies Inc., GlaxoSmithKline, Art Robbins, Bruker, HKL Research Inc., Molecular Dimensions, Hampton Research, Labcyte, GenScript, Genentech, Emerald BioSystems, TTP LabTech, Oxford Cryosystems, PhD Posters, Duke University School of Medicine, Duke Human Vaccine Institute, and Avanti Polar Lipids Inc.

1 0

Submissions for next CCN newsletter
by Nigel Moriarty 07 May '13

07 May '13

Folks Calling for articles and short communications of interest to structural biologists. The deadline for submission in the June 2013 issue is 31 May, 2013 but if you can send me drafts before the 15th of May we can get started on generating proofs. The Computational Crystallography Newsletter (CCN) is an electronic newsletter for structural biologists, and is published online every 6 months. Feature articles, meeting announcements and reports can be submitted to me at any time for consideration. Submission of text by email or word-processing files using the CCN templates is requested. Past newsletters and a Microsoft Word template are available at www.phenix-online.org/newsletter. Cheers Nigel -- Nigel W. Moriarty Building 64R0246B, Physical Biosciences Division Lawrence Berkeley National Laboratory Berkeley, CA 94720-8235 Phone : 510-486-5709 Email : NWMoriarty(a)LBL.gov Fax : 510-486-5909 Web : CCI.LBL.gov

1 0

43rd Mid-Atlantic Macromolecular Crystallography Meeting
by Charles Pemble 07 May '13

07 May '13

*43**rd** Mid-Atlantic Macromolecular Crystallography Meeting* *May 30 – June 1, 2013* *Duke University* *Durham, NC* This is a reminder for the 43rd Mid-Atlantic Macromolecular Crystallography Meeting, which will be held at Duke University in Durham, North Carolina. This meeting fosters discussion and interaction among structural biologists from around the Mid-Atlantic region. Registration and details can be found at http://www.mid-atlantic.org. The deadline for registration is May 15th. This year will feature keynote speaker Tom Terwilliger from Los Alamos National Lab, workshops on PHENIX and MolProbity, plus many talks & posters on new and exciting research. Presentations will be selected from submitted abstracts and preference will be given to young researchers. The best presentation and poster by a Graduate Student & Postdoctoral Fellow will be awarded (total of 4). We encourage you to submit your abstracts and sign up for the workshops as these are separate processes from registration. *DEADLINES:* Registration - May 15th Abstract submission for presentation - May 10th Abstract submission for poster - May 27th *IMPORTANT: *A block of rooms have been reserved at the Millennium hotel as well as the Duke dormitories. The deadline for reserving a room at the Millennium is May 9th. With best wishes on behalf of the primary Organizing Committee, Charlie Pemble _____________________________ Charles W. Pemble IV, Ph.D. Duke University Medical Center 308 Research Drive LSRC, A06 Durham, NC 27708 charles.pemble(a)duke.edu We thank our current sponsors for their generous contributions: Rigaku Americas Corporation, Agilent Technologies Inc., GlaxoSmithKline, Art Robbins, Bruker, HKL Research Inc., Molecular Dimensions, Hampton Research, Labcyte, GenScript, Genentech, Emerald BioSystems, TTP LabTech, Oxford Cryosystems, PhD Posters, Duke University School of Medicine, Duke Human Vaccine Institute, and Avanti Polar Lipids Inc.

1 0

Morphing only a part of the model?
by Guenter Fritz 06 May '13

06 May '13

Dear all, I am working on a multisubunit protein complex (ca. 2000 residues). I would like to morph only a part or one subunit into the experimental electron density without morphing the rest of the protein. iIs there a way to select a subunit or a part of the model? Best regards, Guenter

2 3

Find Difference peaks and holes
by John Rose 03 May '13

03 May '13

Hi, I can't seem to find the "Find Difference peaks and holes" utility in the PHENIX 1.8.2-1309 distribution. I found it to be very useful. Can you tell me where it is hiding. Regards, John John Rose Ph.D. Associate Professor B204B, The Fred C. Davison Life Sciences Complex 120 Green Street Department of Biochemistry and Molecular Biology University of Georgia Athens, GA 30602-7229 ========================================= Phone: 706-542-1750 Fax: 706-542-3077

4 4

ReadySet & phenix.refine problem: NAG-Asn with hydrogen atoms
by Zhijie Li 30 Apr '13

30 Apr '13

Hello, I am refining my structure with hydrogen atoms on (phenix 1.8.2-1309). The protein contains two Asn-linked GlcNAc. I noticed two problems with respect to the NAG-Asn linkage in the presence of hydrogen atoms: 1) After running ReadySet (to add hydrogen to the PDB ab initio), the H1 on the NAG is pointing to the amino group of Asn, ie, the NAG seems to be interpreted as in its alpha anomer instead of beta (should be GlcNAc beta1,N-Asn). This is not really a problem as it doesn't seem to affect the refinement. 2) The H21 in Asn is correctly removed by ReadySet, leaving only H22. However, if I send this PDB to phenix.refine, the refinement will fail almost instantly complaining that H22 of the Asn has an unknown nonbonded energy type symbol. But if I simply change the atom name of H22 to H21, the refinement will proceed to completion with no problem, only leaving an H21 at the position where H22 should be. I was not sure what caused this error. So I trimmed my PDBs down to the Asn and NAG only, and fed the small PDB to ReadySet and phenix.refine (with an eff file indicating the NAG-Asn linkage) and got the same behavior: H22 on Asn - error; H21 on Asn - OK. I hope someone can look into this. Thanks in advance. Zhijie

2 3