- phenixbb - phenix-online.org

Bad ligand parameters
by Joe Krahn 21 Oct '10

21 Oct '10

I found that residue TRS has different dihedral target angles for the three hydroxyl oxygens, which are actually all equivalent. They have a periodicity of 1, but should have a periodicity of 3. What is the best way to handle such discrepancies? Most ligand parameters are probably auto-generated based on a reference structure, and there is probably a lot of conformation bias. In this case, it seems that parameterization should have been able to detect symmetry. It would be nice if parameters could include information about whether a human has done any validation. Actually, a ligand Wiki might be nice, where people can easily put comments, even if they are not sure about how to improve the parameters. Joe Krahn

9 13

refine : a priori TLS tensor eigenvalues
by Bryan Lepore 21 Oct '10

21 Oct '10

[ phenix 1.6.4-486 ] i gather that phenix.refine will not take a priori refined TLS tensor eigenvalues - either from input or from the pdb header. is this right? -bryan

2 3

Joint X-ray/Neutron Refinement
by Louis Lazar 21 Oct '10

21 Oct '10

Hello, Sorry for reposting, I am trying to get a better response with a more detailed subject line. I am seeing an internal error while trying to conduct joint x-ray/neutron refinement, and any help with the issue below would be greatly appreciated. Thank you very much in advance: ================================ ADP refinement=============================== Traceback (most recent call last): File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/command_line/refine.py", line 11, in <module> command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/command_line.py", line 89, in run call_back_handler=call_back_handler) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/driver.py", line 1182, in run call_back_handler = call_back_handler) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/strategies.py", line 735, in refinement_machine h_params = h_params) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/refinement/adp_refinement.py", line 192, in __init__ all_params = all_params) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/refinement/adp_refinement.py", line 216, in refine_adp model.set_refine_individual_adp() File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/model.py", line 1035, in set_refine_individual_adp iselection = selection_iso.iselection()) RuntimeError: cctbx InternalError: /net/anaconda/scratch1/phenix/phenix-1.6.4-486/cctbx_project/cctbx/xray/scatterer_flags.h(417): CCTBX_ASSERT(f.use_u_iso()) failure. This error occurs during the 2nd macro cycle of refinement using this general command: phenix.refine model.pdb data_xray.hkl neutron_data.file_name=data_neutron.hkl input.xray_data.labels=FOBSx input.neutron_data.labels=FOBSn Thanks again. Regards, Louis

2 1

Stretched Maps
by Joel Weadge 21 Oct '10

21 Oct '10

Hi all,I have just finished doing molecular replacement and an initial round of refinement (with simulated annealing) on a number of different datasets. They have all be straightforward since most of them are either point mutants and/or co-crystal structures. However, two of the structures are giving me some trouble. The data appears to be of good quality and resolution (2.25 and 2.55Å). The MR proceeds as normal with good scores and then in the subsequent round of refinement the maps (2Fo-Fc and Fo-Fc) look strange. The density is stretched or flattened in one direction. Can anyone help me with what I may be overlooking?Thanks in advanceJW

5 4

occupancy refinement of a metal ion
by Christian Roth 20 Oct '10

20 Oct '10

Dear all, if I understood the manual correctly I could refine the occupancy and set the B-Factor to a constant value, or vice versa. Is there a possibility that phenix refine the B-Factor automatically to the value of the coordinating residues and adjust than the occupancy to a good value? I seems to be that the metal site is not fully occupied. I guess I have to set the B-value manually to the value of the surrounding residues and do than a refinement, right? Best regards Christian

2 1

fix rotamers question
by Peter Grey 20 Oct '10

20 Oct '10

Dear Phenix community, I would like to have some additional information regarding fix_rotamers. In particular : - How Phenix chooses which rotamers need to be fixed ? - Does Phenix really re-calculate the three maps after correcting each rotamer ? For very large structures this is very time-consuming and one can settle for calculating a new map every 10-20 residues. Perhaps this could be a user-controlled parameter ? -Can you please explain how fix_rotamers works together with ncs restraints ? Thank you in advance for shedding light on this, Peter

3 3

about low resolution refinement
by crystallogrphy 18 Oct '10

18 Oct '10

Hi, I am refining a low resolution data. According to sigma vs. resolution, my resolution is 4.7A. Because there are four identical molecular per asymetric unit, I can use positional refinement. There are about 65% alpha-helices in the structure, so I want to use secondary structure restrain. Does phenix has this restrain in the refinement? I am using Phenix-1.4 version.

4 4

Question
by Louis Lazar 18 Oct '10

18 Oct '10

Hello, I am seeing an internal error while trying to conduct joint x-ray/neutron refinement, and any help with the issue below would be greatly appreciated. Thank you very much in advance: ================================ ADP refinement =============================== Traceback (most recent call last): File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/command_line/refine.py", line 11, in <module> command_line.run(command_name="phenix.refine", args=sys.argv[1:]) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/command_line.py", line 89, in run call_back_handler=call_back_handler) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/driver.py", line 1182, in run call_back_handler = call_back_handler) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/phenix/phenix/refinement/strategies.py", line 735, in refinement_machine h_params = h_params) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/refinement/adp_refinement.py", line 192, in __init__ all_params = all_params) File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/refinement/adp_refinement.py", line 216, in refine_adp model.set_refine_individual_adp() File "/sware/phenix-1.6.4-486/linux64/phenix-1.6.4-486/cctbx_project/mmtbx/model.py", line 1035, in set_refine_individual_adp iselection = selection_iso.iselection()) RuntimeError: cctbx InternalError: /net/anaconda/scratch1/phenix/phenix-1.6.4-486/cctbx_project/cctbx/xray/scatterer_flags.h(417): CCTBX_ASSERT(f.use_u_iso()) failure. This error occurs during the 2nd macro cycle of refinement using this general command: phenix.refine model.pdb data_xray.hkl neutron_data.file_name=data_neutron.hkl input.xray_data.labels=FOBSx input.neutron_data.labels=FOBSn Thanks again. Regards, Louis

1 0

real space refinement or fix rotamers
by helene.krueger＠staff.uni-marburg.de 14 Oct '10

14 Oct '10

Hi, I want to fit bad fitting residues into electron density of my 2.0 A dataset. To do so should I use the "real space" option or the "fix bad sidechain rotamers" option? or both? Thanks Helene -- Helene Köster Philipps-Universität Marburg Institute of Pharmaceutical Chemistry AG Klebe Marbacher Weg 6 35032 Marburg, Germany Phone: +49-6421-28-25908 Mail: helene.krueger(a)staff.uni-marburg.de www.agklebe.de

2 1

How to eliminate or decrease negative electron density at ligand position
by J J 13 Oct '10

13 Oct '10

Hello everyone, I have fine electron density 2Fo-Fc around a small ligand (~20 atoms) binding to my protein (at 1sigma level, all of the ligand atoms are surround by electron density, resolution=3 angstrom). However, I also see some negative electron density Fo-Fc surrounding some of the ligand atoms. My question is should I care about these negative electron density? If I should, what should I do in order to decrease or eliminate these negative electron density? I have tried occupancy refinement. It does help to decrease the negative density. However, it also makes 2Fo-Fc weaker. Another method I tried is to use tls refinement only for the ligand. It also helped to decrease the negative electron density. But since the data resolution is only 3 angstrom, I do not know if I am even allowed to do tls refinement? Thank you all in advance. Jason University of Pittsburgh

2 1