- phenixbb - phenix-online.org

Spatial query acceleration structure in cctbx?
by Russell M. Taylor II 08 Mar '21

08 Mar '21

As part of integrating the MolProbity tools more tightly with the CCTBX, I'm modifying the Probe code that will be shared by it and Reduce to use native CCTBX structures. One of the structures is a spatial map to accelerate the search for nearby atoms in a model. Before building my own (3D grid with near neighbors listed, ability to insert and remove atoms as they move), I wanted to check and see what was already available in the CCTBX. I looked at the page listing the CCTBX core objects and functions and did not see one, and searching for "spatial" and "accel" in the source tree did not turn up anything promising. Is there one already in there? If not, is this something that others would find to be a useful tool and, if so, where should it live? Otherwise, I'll make it part of Probe. Thanks, Russ Taylor --- Russell M. Taylor II, Ph.D. russ(a)reliasolve.com taylor(a)redbudlabs.com rtaylor(a)aqueti.com russ(a)outloveracism.org www.cs.unc.edu/~taylorr

1 0

PAIREF Webinar (23rd March 2021, 15:00 CET)
by Petr Kolenko 08 Mar '21

08 Mar '21

Dear colleagues, We are pleased to announce the webinar on paired refinement to be held on March 23, 2021, from 3 PM (CET) to 4 PM (CET). This protocol provides an accurate estimation of the high-resolution cutoff (https://journals.iucr.org/m/issues/2020/04/00/mf5044/). The "PAIREF webinar" will be a free virtual event for up to 300 participants. The meeting will be recorded. Please register and receive your Zoom link here: https://kipl-indico.fjfi.cvut.cz/e/pairef We will cover: 1. Introduction to paired refinement. 2. Installation of PAIREF for CCP4 and/or PHENIX users. 3. Short tutorial (files will be provided). 4. Discussion. Feel free to contact us with your data. Best regards, Petr Kolenko, Martin Maly, Kay Diederichs and Jan Dohnalek

1 0

error for "rosetta.run_tests"
by Smith Lee 06 Mar '21

06 Mar '21

Dear All, For rosetta installation for use in phenix, in the .bashrc I have: export PATH="/home/usrname/rosetta_src_2020.08.61146_bundle":$PATHexport PATH="/home/username/phenix11914122installdir/phenix-1.19.1-4122/build/bin":$PATH and I have the .bashrc file sourced. However when I run "rosetta.run_tests", I got the following error: --...... End of input processing Sorry: The RosettaScripts executable could not be located. Please set the environmental variable PHENIX_ROSETTA_PATH or add the appropriate directory to your PATH environment variable. ---- I am looking forward to getting your advice on how to solve the error issue. Smith

1 0

phenix.molprobity geo
by Paul Emsley 04 Mar '21

04 Mar '21

Hello, I'd like to compare the restraints generated by Coot to the validation provided by molprobity. When I run phenix.molprobity on my model, it gives me (amongst other things) this: ----------------------- Histogram of nonbonded interaction distances: 1.87 - 2.42: 526 2.42 - 2.96: 3217 2.96 - 3.51: 3639 3.51 - 4.05: 5026 4.05 - 4.60: 6847 Nonbonded interactions: 19255 Sorted by model distance: nonbonded pdb=" O LEU A 21 " pdb=" H GLY A 26 " model vdw 1.874 1.850 nonbonded pdb=" H ILE A 71 " pdb=" O TYR A 80 " model vdw 1.920 1.850 nonbonded pdb=" H GLY A 34 " pdb=" O GLU A 54 " model vdw 1.925 1.850 nonbonded pdb=" O ILE A 71 " pdb=" H TYR A 80 " model vdw 1.937 1.850 nonbonded pdb=" HE ARG A 40 " pdb=" HG1 THR A 76 " model vdw sym.op. 1.955 2.100 -x+3/2,-y,z+1/2 ... (remaining 19250 not shown) NOTE: a complete listing of the restraints can be obtained by requesting output of .geo file. -------------------------- I don't understand this lilst. Should I be concerned by those interactions? Which of these atom pairs are contributing to the clashscore? Perhaps the details are in the .geo file? How do I get a .geo file? I googled, I didn't find the answer. How could I have found the answer without asking here? Thanks, Paul.

2 2

Re: [phenixbb] executing Phenix in a python script on a Windows OS
by Muriel Gelin 02 Mar '21

02 Mar '21

Here is what I have: In a prompt: C:\Users\MG>C:\Users\MG\Phenix\phenix-installer-1.19.1-4122-intel-windows-x86_64\phenix_env.bat C:\Users\MG>phenix.refine Usage: phenix.refine [options] [reflection_file] [pdb_file] [parameter_file] -------------------------------------------------------------------------------- In python: source = subprocess.Popen(str(r"C:\Users\MG\Phenix\phenix-installer-1.19.1-4122-intel-windows-x86_64\phenix_env.bat"), stdin=subprocess.PIPE, stdout=subprocess.PIPE, shell=True) >>> phenix.refine Traceback (most recent call last): File "<stdin>", line 1, in <module> NameError: name 'phenix' is not defined >>> py phenix.refine File "<stdin>", line 1 py phenix.refine ^ -------------------------------------------------------------------------------- If somebody see what is the problem. I'm afraid I am stuck ... Thank you all. Muriel Le 02/03/2021 à 11:03, gelin a écrit : > Dear Bernhard, > > Thank you for your answer. > > Executing phenix_env.bat in Windows command prompt works well, since I > can then execute phenix.refine in the prompt. > > So I tried to add in my python script something like that: > source = subprocess.Popen(my_path\phenix_env.bat, > stdin=subprocess.PIPE, stdout=subprocess.PIPE, > stderr=subprocess.PIPE) > Unfortunately, it doesn't work. I suppose the prompt environment is > not modified. > > Do you know how to do that in my python script so that I can then > execute something like: > xtriage = subprocess.Popen(["phenix.xtriage", my_mtz, > "parameters.reporting.log=" + "xtriage.log")], > stdin=subprocess.PIPE, > stdout=subprocess.PIPE, stderr=subprocess.PIPE) > > Thank you for you help. > > Muriel > > Le 2021-03-01 18:36, Bernhard Rupp a écrit : >> Here is what I did: >> >> Install phenix >> >> make a batch command in your path (eg phx.bat) that executes the >> environment setup, eg. >> C:\Phenix\phenix-installer-1.19-4092-intel-windows-x86_64\phenix_env.bat >> >> Open terminal, execute that batch (modify as you like), and there you go >> >> c:\data\Dropbox\Refinements\5okl>phenix.refine >> Usage: phenix.refine [options] [reflection_file] [pdb_file] >> [parameter_file] >> .... >> >> Best, BR >> >> -----Original Message----- >> From: phenixbb-bounces(a)phenix-online.org >> <phenixbb-bounces(a)phenix-online.org> On Behalf Of Muriel Gelin >> Sent: Monday, March 1, 2021 09:08 >> To: phenixbb(a)phenix-online.org >> Subject: [phenixbb] executing Phenix in a python script on a Windows OS >> >> Dear Phenix community, >> >> I wrote a python script to automate the processing of our data with >> Phenix. I'm not a developer by profession, but a crystallographer, and >> write scripts usually under Linux. My colleagues working under Windows >> asked me to share my script. >> >> I managed to run a simple python script under windows, no problem. But >> for a script that executes Phenix, it's not so easy (for me). >> >> Under Linux, I manage to source phenix_env.csh, but under Windows what >> is the command to setup Phenix in order to simply use phenix.refine >> or phenix.xtriage in my script? >> >> All I can find is this page >> https://www.mrc-lmb.cam.ac.uk/public/xtal/doc/phenix/install-setup-run.html >> >> >> but I don't think it answers my question. >> >> Thank you in advance for your help! >> >> Muriel >> >> -- >> Dr Muriel Gelin >> >> Research Engineer >> Centre de biochimie Structurale de Montpellier Team "ABCIS: Avanced >> Biology, Chemistry, Informatics Studio" >> >> CNRS UMR 5048 - UM - INSERM U 1054 >> 29 rue de Navacelles >> 34090 MONTPELLIER Cedex - FRANCE >> http://www.cbs.cnrs.fr >> >> Tel: (33) 04 67 41 77 12 >> >> >> -- >> This message has been scanned for viruses and dangerous content by >> MailScanner, and is believed to be clean. >> >> _______________________________________________ >> phenixbb mailing list >> phenixbb(a)phenix-online.org >> http://phenix-online.org/mailman/listinfo/phenixbb >> Unsubscribe: phenixbb-leave(a)phenix-online.org > -- Dr Muriel Gelin Research Engineer Centre de biochimie Structurale de Montpellier Team "ABCIS: Avanced Biology, Chemistry, Informatics Studio" CNRS UMR 5048 - UM - INSERM U 1054 29 rue de Navacelles 34090 MONTPELLIER Cedex - FRANCE http://www.cbs.cnrs.fr Tel: (33) 04 67 41 77 12 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

on rosetta installation for phenix
by Smith Lee 02 Mar '21

02 Mar '21

Dear All, I have tried to install Rosetta for phenix use based on the guide in https://www.phenix-online.org/documentation/reference/rosetta_install.html. After the "tar xzf..." command, I added the directory for the installed rosetta (something like "export PHENIX_ROSETTA_PATH=/your-path-to-rosetta-here/") to my .bashrc (and in fact I also have added into /bash_profile) and sourced it. For the final step to build the interface for rosetta_refine, as for my gcc version is 8.3.1, I have deleted the original site.settings in the directory ${PHENIX_ROSETTA_PATH}/main/source/tools/build/, and exactly copied the content in https://www.phenix-online.org/documentation/extras/site.settings and save it as site.settings in the directory ${PHENIX_ROSETTA_PATH}/main/source/tools/build/. Command "nproc" displays 12, then I run "rosetta.build_phenix_interface nproc=12". In the running step for the above command, I remember it asked me "whether to install "sed" (I do not what is "sed" for), I answer "y" and "enter", it seems like the computer stopped. I opened another terminal, and all commands like "ls","cd" failed to work. I restarted the computer, but I cannot log into my centos username account anymore. I restarted the computer by initiating the centos secure start system, and deleted the export directory for the rosetta from the .bashrc and .bash_profile. In this way I restarted the computer and I can log into my centos user name account as usual. But as you know, my rosetta still did not work. Thus, will you please advice what is wrong for my installation fof the rosetta (for phenix use) and how to make it workable? I am looking forward to getting your reply. Best wishes, Smith

1 0

Computational Crystallography Newsletter – Jan. 2021
by Nigel Moriarty 01 Mar '21

01 Mar '21

Folks The latest issue of the CCN is available on the website. Please consider contributing to future issues. The Computational Crystallography Newsletter (CCN) is an electronic newsletter for structural biologists, and is published online every 6 months. Feature articles, meeting announcements and reports can be submitted to me at any time for consideration. Submission of text by email or word-processing files using the CCN templates is requested. Past newsletters and a Microsoft Word template are available at www.phenix-online.org/newsletter. January 2021 <http://phenix-online.org/newsletter/CCN_2021_01.pdf> Articles - HKLviewer, a new 3D reflection data viewer for CCTBX <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=15> - Running CCTBX and PyMOL in the same Jupyter Notebook <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=26> Short Communications - PDB50: Celebrating 50 Years of the Protein Data Bank in 2021 <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=5> - Lessons from using the Cambridge Structure Database: II – Element specification X/Z <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=6> - The Importance of Being Positive: Charged ligands that bind nucleic acids <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=9> Fitting tips #20 - In-plane or out-of-plane H atom placement on the edges of aromatic rings <http://phenix-online.org/newsletter/CCN_2021_01.pdf#page=2> Cheers Nigel --- Nigel W. Moriarty Building 33R0349, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory Berkeley, CA 94720-8235 Phone : 510-486-5709 Email : NWMoriarty(a)LBL.gov Fax : 510-486-5909 Web : CCI.LBL.gov ORCID : orcid.org/0000-0001-8857-9464

1 0

executing Phenix in a python script on a Windows OS
by Muriel Gelin 01 Mar '21

01 Mar '21

Dear Phenix community, I wrote a python script to automate the processing of our data with Phenix. I'm not a developer by profession, but a crystallographer, and write scripts usually under Linux. My colleagues working under Windows asked me to share my script. I managed to run a simple python script under windows, no problem. But for a script that executes Phenix, it's not so easy (for me). Under Linux, I manage to source phenix_env.csh, but under Windows what is the command to setup Phenix in order to simply use phenix.refine or phenix.xtriage in my script? All I can find is this page https://www.mrc-lmb.cam.ac.uk/public/xtal/doc/phenix/install-setup-run.html but I don't think it answers my question. Thank you in advance for your help! Muriel -- Dr Muriel Gelin Research Engineer Centre de biochimie Structurale de Montpellier Team "ABCIS: Avanced Biology, Chemistry, Informatics Studio" CNRS UMR 5048 - UM - INSERM U 1054 29 rue de Navacelles 34090 MONTPELLIER Cedex - FRANCE http://www.cbs.cnrs.fr Tel: (33) 04 67 41 77 12 -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 2

on rosetta installation for phenix use
by Smith Lee 28 Feb '21

28 Feb '21

Dear All, I have tried to install Rosetta for phenix use based on the guide in https://www.phenix-online.org/documentation/reference/rosetta_install.html. After the "tar xzf..." command, I added the directory for the installed rosetta (something like "export PHENIX_ROSETTA_PATH=/your-path-to-rosetta-here/") to my .bashrc (and in fact I also have added into /bash_profile) and sourced it. For the final step to build the interface for rosetta_refine, as for my gcc version is 8.3.1, I have deleted the original site.settings in the directory ${PHENIX_ROSETTA_PATH}/main/source/tools/build/, and exactly copied the content in https://www.phenix-online.org/documentation/extras/site.settings and save it as site.settings in the directory ${PHENIX_ROSETTA_PATH}/main/source/tools/build/. Command "nproc" displays 12, then I run "rosetta.build_phenix_interface nproc=12". In the running step for the above command, I remember it asked me "whether to install "sed" (I do not what is "sed" for), I answer "y" and "enter", it seems like the computer stopped. I opened another terminal, and all commands like "ls","cd" failed to work. I restarted the computer, but I cannot log into my centos username account anymore. I restarted the computer by initiating the centos secure start system, and deleted the export directory for the rosetta from the .bashrc and .bash_profile. In this way I restarted the computer and I can log into my centos user name account as usual. But as you know, my rosetta still did not work. Thus, will you please advice what is wrong for my installation fof the rosetta (for phenix use) and how to make it workable? I am looking forward to getting your reply. Best wishes, Smith

1 0

Collection of articles from ISDSB2019 now published in IUCr Journals
by John R Helliwell 26 Feb '21

26 Feb '21

Dear Colleagues, A collection of articles from the International Symposium on Diffraction Structural Biology 2019 held in Osaka is now online in IUCr Journals at https://journals.iucr.org/special_issues/2021/ISDSB2019 Several of these articles are open access. Best wishes, Atsushi Nakagawa, John Helliwell and Yuriko Yamagata

1 0