![](https://secure.gravatar.com/avatar/dfa407d6623b3e988a7cae7998149035.jpg?s=120&d=mm&r=g)
Thank you Nigel, Rama-Z "before" (amber energy minimization): Rama-Z (Ramachandran plot Z-score): Interpretation: bad |Rama-Z| > 3; suspicious 2 < |Rama-Z| < 3; good |Rama-Z| < 2. Scores for whole/helix/sheet/loop are scaled independently; therefore, the values are not related in a simple manner. whole: -0.32 (0.86), residues: 62 helix: 0.09 (1.50), residues: 12 sheet: None (None), residues: 0 loop : -0.27 (0.70), residues: 50 after phenix.geometry_minimization whole: -3.20 (0.87), residues: 62 helix: None (None), residues: 0 sheet: -3.03 (1.30), residues: 12 loop : -2.05 (0.72), residues: 50 repeated with cdl=False whole: -3.35 (0.90), residues: 62 helix: None (None), residues: 0 sheet: -4.51 (1.09), residues: 10 loop : -1.90 (0.75), residues: 52 pdbs and logs are tarballed here: https://bl831.als.lbl.gov/~jamesh/bugreports/phenixmin_070721.tgz On 7/8/2021 11:16 AM, Nigel Moriarty wrote:
James
This is very interesting from a different perspective but I should point out a few things.
1. The CDL, which is the default, changes the backbone bonds and angles based on phi/psi. Maybe in geometry minimisation this is causing the "whirlygig." Can you check with cdl=False?
2. In a recent pub
1. Sobolev OV, Afonine PV, Moriarty NW, Hekkelman ML, Joosten RP, Perrakis A, Adams PD: *A Global Ramachandran Score Identifies Protein Structures with Unlikely Stereochemistry.* /Structure/ 2020, *28*:1249-1258.e2. http://dx.doi.org/10.1016/j.str.2020.08.005 [PMID: 32857966] [PMCID: PMC7642142]
we argue that percent favoured is not an accurate measure of Rama health. Could also provide these numbers?
Cheers
Nigel
--- Nigel W. Moriarty Building 33R0349, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory Berkeley, CA 94720-8235 Phone : 510-486-5709 Email : [email protected] Fax : 510-486-5909 Web : CCI.LBL.gov http://CCI.LBL.gov ORCID : orcid.org/0000-0001-8857-9464 https://orcid.org/0000-0001-8857-9464
On Thu, Jul 8, 2021 at 10:28 AM James Holton
mailto:[email protected]> wrote: Thank you Pavel for your prompt response!
I agree with everything you wrote below, and that is a good point about 2nd derivatives.
However, what I'm seeing is the opposite of what you might predict. See below.
On 7/7/2021 11:27 PM, Pavel Afonine wrote:
Hi James,
thanks for email and sharing your observations!
Greetings all, and I hope this little observation helps improve things somehow.
I did not expect this result, but there it is. My MolProbity score goes from 0.7 to 1.9 after a run of phenix.geometry_minimization
I started with an AMBER-minimized model (based on 1aho), and that got me my best MolProbity score so far (0.7). But, even with hydrogens and waters removed the geometry_minimization run increases the clashscore from 0 to 3.1 and Ramachandran favored drops from 98% to 88% with one residue reaching the outlier level.
It is not a secret that 'standard geometry restraints' used in Phenix and alike (read Refmac, etc) are very simplistic. They are not aware of main chain preferential conformations (Ramachandran plot), favorable side chain rotamer conformations. They don't even have any electrostatic/attraction terms -- only anti-bumping repulsion! Standard geometry restraints won't like any NCI (non-covalent interaction) and likely will make interacting atoms break apart rather than stay close together interacting.
Yes, there's the rub: I'm not seeing "interacting atoms break apart", but rather they are being smashed together. Torsion angles are also being twisted out of allowed regions of the Ramachandran plot.
All this with the x-ray term turned off!
With this in mind any high quality (high-resolution) atomic model or the one optimized using sufficiently high-level QM is going to have a more realistic geometry than the result of geometry regularization against very simplistic restraints target. An example:
https://journals.iucr.org/d/issues/2020/12/00/lp5048/lp5048.pdf https://journals.iucr.org/d/issues/2020/12/00/lp5048/lp5048.pdf
and previous papers on the topic.
I agree, but what doesn't make sense to me is how the "simplistic restraints" of phenix.geometry_minimization would be so inconsistent with the "simplistic restraints" in phenix.molprobity ?
What I am doing here is starting with an energy-minimized model of a 1.0 A structure (1aho). It's not a fancy QM, just the ff14SB potential in AMBER. I get my best molprobity scores this way, but I need an x-ray refinement program like phenix.refine to compare these models with reality. It troubles me that the "geometry" in the x-ray refinement program all by itself messes up my molprobity score.
Just for comparison, with refmac5 in "refi type ideal" mode I see the MolProbity rise to 1.13, but Clashscore remains zero, some Ramas go from favored to allowed, but none rise to the level of outliers.
I believe this is because of the nature of minimizer used. Refmac uses 2nd derivative based one, which in a nutshell means it can move the model much less (just a bit in vicinity of a local minimum) than any program that uses gradients only (like Phenix).
good point.
So, what should I do to stabilize phenix.geometry_minimization? Crank up the non-bonded weight? Restrain to starting coordinates?
Files and logs here: https://bl831.als.lbl.gov/~jamesh/bugreports/phenixmin_070721.tgz https://bl831.als.lbl.gov/~jamesh/bugreports/phenixmin_070721.tgz
I suspect this might have something to do with library values for main-chain bonds and angles? They do seem to vary between programs. Phenix having the shortest CA-CA distance by up to 0.08 A. After running thorough minimization on a poly-A peptide I get: bond amber refmac phenix shelxl Stryer C-N 1.330 1.339 1.331 1.325 1.32 N-CA 1.462 1.482 1.455 1.454 1.47 CA-C 1.542 1.534 1.521 1.546 1.53 CA-CA 3.862 3.874 *3.794* 3.854
So, which one is "right" ?
I'd say they are all the same, within their 'sigmas' which are from memory about 0.02A: I note that 3.874 - 3.794 = 0.08 > 0.02
This brings me to my pet theory. I think what is going on is small errors like this build up a considerable amount of tension in the long main chain. For this 64-mer, the contour length of the main chain after idealization is ~5 A shorter after phenix.geometry_minimization than it is after shelxl or amber. That 5 A has to come from somewhere. Without stretching bonds or bending angles the only thing left to do is twisting torsions. A kind of "whirlygig" effect.
The question is: is the phenix CA-CA distance too short? Or is the amber CA-CA distance too long?
Shall we vote?
-James
_______________________________________________ phenixbb mailing list [email protected] mailto:[email protected] http://phenix-online.org/mailman/listinfo/phenixbb http://phenix-online.org/mailman/listinfo/phenixbb Unsubscribe: [email protected] mailto:[email protected]