Author(s)

• dock_and_rebuild: Tom Terwilliger

Purpose

Dock and rebuild combines the functions of processing, docking and rebuilding predicted models produced by AlphaFold, RoseTTAFold and other prediction software into a cryo EM map.

These steps can also be carried out one at a time. There are three steps in working on an AlphaFold or other predicted model with a cryo-EM structure.

The first step is to process the predicted model by trimming off all the uncertain residues in the predicted model and breaking up the remaining structure into a best guess of rigid domains with phenix.process_predicted_model .

The next step is to dock each of the domains of the processed model into the map, keeping plausible connectivity. This is done with phenix.dock_predicted_model .

The third step is to morph the predicted model onto the docked domains and then to rebuild all the parts of the predicted model using the density in the map. This is done with phenix.rebuild_predicted_model .

How dock_and_rebuild works:

The dock_and_rebuild procedure is just a way to connect all three steps in processing, docking and rebuilding a predicted model. You may want to use this procedure if you have a simple case, or if you have many models you want to process. If it does not work well, you may want to take its intermediate outputs (i.e., the docked model) and carry out the following steps individually.

The model input to dock_predicted_model is your starting predicted model file (i.e., an AlphaFold model)

The map input to dock_predicted model is normally your best sharpened or density-modified cryo-EM map. It can also be a map generated by any other procedure (including crystallography).

If you are able to mask your map, keeping only the part representing the region where this model belongs, that can be very helpful. You can also box the map around this region. If you have a map that has many chains, this masking can greatly shorted the time for docking. If you don't know where in your map the model goes at all, you can supply the entire map. If your map has symmetry this will normally be found automatically.

The three steps described above are then carried out: processing the model to obtain domains representing the accurate parts of the model (phenix.process_predicted_model), docking the domains (phenix.dock_predicted_model), and morphing and rebuilding the predicted model (phenix.rebuild_predicted_model) to yield a rebuilt version of the predicted model.

Examples

Standard run of dock_and_rebuild:

Running dock_and_rebuild is easy. From the command-line you can type:

phenix.dock_and_rebuild model=my_model.pdb \
   map_file=my_map.ccp4 \
   resolution=3

This will carry out all the steps of processing, docking and rebuilding to yield my_model_rebuilt.pdb

Possible Problems

If your map has pseudo-symmetry (like a proteasome) you might need to box one subunit or try ssm_search=False to use a more thorough search in docking.

Specific limitations and problems:

Literature

Additional information

List of all available keywords

• job_title = None Job title in PHENIX GUI, not used on command line
• input_files
  • processed_model_file = None Processed model file (e.g., from phenix.process_predicted_model). If supplied, skip the process_predicted_model step and use this file. This model is expected to have one chain for each domain and actual B-values in the B-value field. It is expected that all poorly-predicted residues have been removed.
  • docked_model_file = None Docked model (e.g., output of dock_processed_model). If supplied, use this file as the docked model. (Skip process_predicted_model and docking steps This model is expected to have a single chain with gaps for parts of the model that are not accurately known from the prediction. NOTE: You still need to supply the predicted model as the input model for this procedure in addition to this docked model.
  • morphed_model_file = None Morphed model (e.g., full model morphed to match output of dock_processed_model). If supplied, skip the process_predicted_model and docking steps and use this file as the morphed model. This model is expected to have a single chain with no gaps. NOTE: You do not need to supply the predicted model as the input model for this procedure in addition to this morphed model.
  • previous_model_file = None Previous model (from a previous run or external). Must match sequence of working model exactly. Used as a source of possible model information and as a hypothesis for docking of working model. If docked_model_file is also supplied, previous_model is used only as source of model information.
  • fragments_model_file = None Fragments model (e.g., map_to_model.pdb). Used as a source of possible model information and as a hypothesis for docking of working model. If docked_model_file is also supplied, fragments_model is used only as source of model information.
  • symmetry_file = None Symmetry file (.ncs_spec format or MATRX records) with reconstruction symmetry. Used in identification of unique part of map. NOTE: symmetry file applies to map file in original position. NOTE 2: only proper symmetry (point-group, helical) is allowed
  • pae_file = None Optional input json file with matrix of inter-residue estimated errors (pae file)
  • distance_model_file = None Distance_model_file. A PDB or mmCIF file containing the model corresponding to the PAE matrix. Only needed if weight_by_ca_ca_distances is True.
  • search_model_copies = None Used internally only
  • search_model = None used internally only
  • map_model
    • full_map = None Input map file. This can be a boxed or masked map showing just the molecule to dock (best) or a full map with symmetry. If your map has symmetry be sure to set asymmetric_map = False. You can supply a symmetry file if you want. Otherwise symmetry will be automatically determined.
    • half_map = None Input half map files
    • model = None Input predicted model (e.g., AlphaFold model). Assumed to have LDDT values in B-value field (or RMSD values).
• output_files
  • output_model_prefix = None Output files with superposed models will begin with this prefix
  • pdb_out = None Used internally only
  • temp_dir = None Temporary directory. Default is dock_and_build_xx where xx creates new directory
• crystal_info
  • resolution = None High-resolution limit for main search. This can be lower resolution than the data. The search is quicker at lower resolution. If your model is poor, try 2-3 A lower resolution than your data (i.e, if your data is 2.5 A, try 5 A).
  • scattering_table = n_gaussian wk1995 it1992 *electron neutron Choice of scattering table for structure factor calculations. Standard for X-ray is n_gaussian, for cryoEM is electron.
  • wrapping = None You can specify whether the map is wrapped (can map values outside bounds to inside with cell translations).
  • asymmetric_map = None Specifies that this is an asymmetric map and no symmetry is to be supplied or found. Alternative to supplying a symmetry file or symmetry.
  • solvent_content = None Solvent fraction (content) of the cell. You can specify the fraction of the volume of this cell that is taken up by the macromolecule. Normally set automatically. Values go from 0 to 1.
  • chain_type = *PROTEIN DNA RNA Chain type
• process_predicted_model
  • remove_low_confidence_residues = True Remove low-confidence residues (based on minimum lddt or maximum_rmsd, whichever is specified)
  • split_model_by_compact_regions = True Split model into compact regions after removing low-confidence residues.
  • maximum_domains = 3 Maximum domains to obtain. You can use this to merge the closest domains at the end of splitting the model. Make it bigger (and optionally make domain_size smaller) to get more domains.
  • domain_size = 15 Approximate size of domains to be found (A units). This is the resolution that will be used to make a domain map. If you are getting too many domains, try making domain_size bigger (maximum is 70 A).
  • minimum_domain_length = 10 Minimum length of a domain to keep (reject at end if smaller).
  • maximum_fraction_close = 0.3 Maximum fraction of CA in one domain close to one in another before merging them
  • minimum_sequential_residues = 5 Minimum length of a short segment to keep (reject at end ).
  • minimum_remainder_sequence_length = 15 used to choose whether the sequence of a removed segment is written to the remainder sequence file.
  • b_value_field_is = *lddt rmsd b_value The B-factor field in predicted models can be LDDT (confidence, 0-1 or 0-100) or rmsd (A) or a B-factor
  • input_lddt_is_fractional = None You can specify if the input lddt values (in B-factor field) are fractional (0-1) or not (0-100). By default if all values are between 0 and 1 it is fractional.
  • minimum_lddt = None If low-confidence residues are removed, the cutoff is defined by minimum_lddt or maximum_rmsd, whichever is defined (you cannot define both). A minimum lddt of 0.70 corresponds to a maximum rmsd of 1.5. Minimum lddt values are fractional or not depending on the value of input_lddt_is_fractional.
  • maximum_rmsd = 1.5 If low-confidence residues are removed, the cutoff is defined by minimum_lddt or maximum_rmsd, whichever is defined (you cannot define both). A minimum lddt of 0.70 corresponds to a maximum rmsd of 1.5. Minimum lddt values are fractional or not depending on the value of input_lddt_is_fractional.
  • default_maximum_rmsd = 1.5 Default value of maximum_rmsd, used if maximum_rmsd is not set
  • subtract_minimum_b = False If set, subtract the lowest B-value from all B-values just before writing out the final files. Does not affect the cutoff for removing low- confidence residues.
  • pae_power = 1 If PAE matrix (predicted alignment error matrix) is supplied, each edge in the graph will be weighted proportional to (1/pae**pae_power). Use this to try and get the number of domains that you want (try 1, 0.5, 1.5, 2)
  • pae_cutoff = 5 If PAE matrix (predicted alignment error matrix) is supplied, graph edges will only be created for residue pairs with pae<pae_cutoff
  • pae_graph_resolution = 1 If PAE matrix (predicted alignment error matrix) is supplied, pae_graph_resolution regulates how aggressively the clustering algorithm is. Smaller values lead to larger clusters. Value should be larger than zero, and values larger than 5 are unlikely to be useful
  • weight_by_ca_ca_distance = False Adjust the edge weighting for each residue pair according to the distance between CA residues. If this is True, then distance_model can be provided, otherwise supplied model will be used. See also distance_power
  • distance_power = 1 If weight_by_ca_ca_distance is True, then edge weights will be multiplied by 1/distance**distance_power.
• search
  • dock_chains_individually = False Dock each chain (identified by chain_id field) individually. This is useful if the chains might have different orientations in the map compared to the search model, such as in a search model that is a predicted model. Normally used along with create_unique_chain_at_end=True for predicted models to put the model back together.
  • create_unique_chain_at_end = None Take all docked chains and try to create one chain that has no duplicate residue numbers and that has distances between ends of fragments consistent with the number of residues between them. If symmetry has been applied, create N copies representing that symmetry. Default is True if dock_chains_individually = True and False otherwise.
  • minimum_cc_to_keep_domain = 0.2 Do not keep domains in create_unique_chain_at_end if cc is less than minimum_cc_to_keep_domain.
  • weight_sequential_fragments_by_distance = None Try to dock a chain in a way that minimizes the distance between its first residue and the previously-docked residue with the highest residue number less than this, and similarly for the last residue and the next available placed residue. Default is True if create_unique_chain_at_end is set. Normally use only if you have a model with a single chain and you are docking pieces of that chain.
  • choose_better_of_individual_and_group_docking = None Dock entire search model (normally one only) and also by chain...pick better-fitting of the two for each chain
  • low_res_search = True Try to fit by searching at low resolution first
  • ssm_search = None Try to fit by searching for secondary structure. Default is False for dock_in_map and True for dock_and_rebuild.
  • refine_cycles = 3 rigid-body refinement cycles
  • ssm_search_min_cc = 0.30 Stop ssm search if this cc achieved
  • backup_resolution_cutoff_searches = 2 If initial fitting does not work, try up to this many times increasing resolution by backup_resolution_ratio each time
  • backup_resolution_ratio = 1.67 If initial fitting does not work, try up to backup_resolution_cutoff_searches times increasing the resolution by backup_resolution_ratio each time
  • resolution_radius_scale = 0.5 Resolution for low-res search will be resolution_radius_scale times the radius of gyration of the search model.
  • align_moments = False Try to fit by aligning moments of inertia if size of density region and molecule are similar
  • max_radius_ratio = 2. Radius of gyration of molecule and density must be within max_radius_ratio of each other
  • radius_scale = 1.5 Mask for density and atoms will be radius_scale times the radius of gyration of model
  • use_symmetry = True If search_model_copies or search_map_copies are the same for each model and greater than one and allow_symmetry is set, use symmetry in the map to place all copies after the first one.
  • skip_if_low_cc = True Skip solution before rigid-body refinement if map-model CC is less than half of min_cc.
  • rigid_body_refinement = True Run rigid-body refinement on final model
  • rigid_body_refinement_single_unit = True Run rigid-body refinement with just one unit (do not break up into chains)
  • rigid_body_refinement_split_method = *chain_id segid When splitting up molecule for rigid-body refinement (if rigid_body_refinement_single_unit=False), use either chain_id or segid to split up molecule
  • rigid_body_refinement_resolution = None Run rigid-body refinement at this resolution if specified
  • append_to_fixed_model = True Append placed search model to fixed model (if any) after search
  • min_cc = 0.4 If quick run, stop if minimum CC is achieved in local search. Also always skip if starting CC_mask is less than 1/4 min_cc.
  • run_in_boxes = True Run on sub-boxes and combine at the end
  • target_box_size = 60 Try to get boxes about this big on a side (grid units)
  • target_boxes = None Try to get this many boxes. Default is nproc unless this makes box size much smaller than target_box_size
  • box_to_run = None Run only this box
  • box_overlap_scale = 1 box overlap (overlap of boxes) will be box_overlap_scale times the density radius
  • edge_ratio = 10 box edge box_overlap times edge_ratio
  • density_radius = None Radius for density to be cut out and compared. Default is 6 times the resolution.
  • model_radius = 3 Radius for removing density near fixed_model
  • zero_value = 0 Value to set map in regions overlapping fixed model
  • density_peaks = 20 Number of NCS-related peaks of density to check
  • delta_phi = 20 Angular spacing of search
  • max_rot = None Maximum rotations to try
  • rotz_only = None Rotate only around Z
  • single_positions_to_try = 10 Number of offset positions to try in optimizing orientation. Positions along the chain are selected as centers and a local fit near each position is carried out. The resulting offsets relative to the original placement are used to optimize the overall orientation and position.
  • max_position_shift_frac = 0.05 Maximum fractional positional shift in single_positions run
  • min_relative_cc = 0.67 Minimum local CC relative to original CC to keep a local search. This is a way to reject local searches that are completely wrong.
  • sieve_fit = None Use sieve_fit fraction of single positions in fitting. If None, use all
  • ncs_copies_max = None Maximum number of matching models to write. If more than one they will be written as MODEL records in the output PDB file. You can get them individually afterwards with phenix.pdbtools placed_model.pdb keep="model 1" etc.
  • start_rot = None Three numbers rotx, rotz, rotx defining the starting rotation of the search model. Normally used along with delta_phi=1000 or max_rot=1 to generate exactly one defined rotation.
  • search_center = None Optional coordinates in search model for centering search. Note this is different from target_search_center which is the location xyz in the map to look.
  • search_center_selection = None Optional selection defining coordinates in search model for centering search.
  • target_search_center = None Optional coordinates in reference map where search_center should be approximately located after superimposing maps. Used to eliminate possible superpositions that place the search center elsewhere. Overlap scores decreased based on distance to target_search_center/density_radius.
  • model_search_position = None Optional coordinates (usually part of search model) for matching to target_search_position after transformation. These can be specified in addition to target_search_center. Can have multiple model_search_position and target_search_position pairs by specifying each multiple times in order. NOTE: Not compatible with map search
  • target_search_position = None Target positions for model_search_position after transformation.
  • search_position_radius = None Radius for comparison of target_search_position and transformed search_position values. Default is density_radius. If specified, must be a single value or the same number of values as entries in model_search_position and target_search_position
  • rot_id_n = None Number of rotation groups. Along with rot_id_group, allows defining groups of rotations to be carried out in one run. .short_caption = Number of rotation groups
  • rot_id_group = None rotation group to include. See rot_id_n.
  • map_box = True Run map_box to extract useful part of map before search
  • fix_search_position = False You can choose to not move your model center of mass to the origin by fixing the search position
  • search_box_size = None You can choose the size of the search box for local searches. Normally set by default corresponding to 3 times density_radius
  • lower_bounds = None You can select a part of your map for analysis with lower_bounds and upper_bounds.
  • upper_bounds = None You can select a part of your map for analysis with lower_bounds and upper_bounds.
  • keep_search_order = None Keep search order as input
  • remove_water = False Remove waters and other hetero atoms from input files
• build
  • run_fit_loops = True Run standard fit_loops
  • run_iterative_morph = True Run iterative morphing
  • run_trace_loops_through_density = True Run loop fitting with trace_through_density algorithm
  • run_refine = True Refine morphed model. Required for run_fit_loops or run_trace_loops_through_density
  • run_iterative_resolution_refine = True Refine morphed model with iterative resolution method
  • run_extend = True Extend ends of morphed model
  • extract_unique = True Extract unique part of map
  • use_symmetry_in_extract_unique = True Use symmetry from symmetry file (if available) when extracting unique part of map.
  • acceptable_docking_cc = 0.5 Acceptable docking CC for a chain
  • minimum_docking_cc = 0.15 Minimum docking CC for a chain
  • cc_sd_ratio = 3. Keep residues with CC at least within cc_sd_ratio of the mean CC for good residues
  • cc_sd_ratio_end = 2. Keep residues with CC at least within cc_sd_ratio of the mean CC for good residues (applies to end of fragments)
  • maximum_connectivity_deviation = 15 Maximum connectivity deviation. Reject a solution with bigger deviation than this plus 2 * resolution.
  • keep_fraction_of_best = 0.5 Acceptable CC to keep as ratio to best found. Applies if best found is at least acceptable_docking_cc.
  • keep_maximum_entries = 10 Maximum dock positions to keep
  • rmsd_for_similar_placement = None RMSD value indicating that two placements are similar. default is resolution of map
  • rigid_body_refine_cycles = 1 Refinement cycles for rigid-body refinement
  • overlap_ca_ca_distance = 3 Overlap distance for CA-CA atoms (or P-P)
  • ca_ca_distance = 3.8 CA-CA distance (or P-P)
  • allowed_fraction_overlapping = 0.10 Allowed fraction overlapping
  • maximum_combinations = 100000 Maximum combinations of placements to consider
  • proceed_with_any_symmetry = False Run even with symmetry that is not point-group or helical. Not recommended as symmetry may not work properly
  • box_cushion = 20 Size of buffer around model when boxing
  • refine_cycles = 3 Refinement cycles
  • loop_refine_cycles = 5 Refinement cycles for loops
  • residues_to_trim = 5 Residues to trim on each end of all trimmed fragments
• control
  • stop_after_dock = None Stop after docking step
  • read_files = False Read existing output files and use them if present
  • write_files = True Write output files
  • nproc = 1 Number of processors (if None, use all available)
  • ignore_symmetry_conflicts = True You can ignore the symmetry information (CRYST1) from coordinate files. This may be necessary if your model has been placed in a box with box_map for example.
  • random_seed = 171731 Random seed
  • max_dirs = 1000 Maximum number of directories (dock_and_build_xxx)
  • verbose = False Verbose output
  • quick = True Run quickly
• guiGUI-specific parameter required for output directory
  • output_dir = None