- phenixbb - phenix-online.org

Specify a chain in Phenix Autobuild
by Xiao Lei 22 Jan '16

22 Jan '16

Hi Phenixbb members, I am using Phenix autobuild for a protein-DNA complex. There are three chains for protein (F, H, I) and two chains for DNA (A and B). I know Autobuild can only build one chain at a time and I'm only going to build chain F. In the autobuild GUI, I can find an option of Chain type "Auto", "protein" , "DNA" and "RNA". Is there a place in the GUI which I can specify only building protein chain "F"? Thanks ahead.

2 1

ligand modification / combination in REEL
by andre.stiel 21 Jan '16

21 Jan '16

Hi, I have a phosphatidyl inositol ligand without an existing CIF file only smiles. When I construct the ligand from the smiles ELBOW regards the sugar as just an aromatic ring. So I see three possibilities how to end up with a proper constraints file for my ligand (that is: tails like in the smiles but with a proper sugar (chair) conformation on top): 1. Can I edit the aromatic ring in REEL in a way to push it into the desired boat/chair conformation? I did not find a command to that end although he can clearly „see“ this conformation as I know from another ligand. 2. Can I chop the sugar part from the .CIF of another ligand and somehow fuse it to my tails? 3. There is a sugar editor in REEL (which however crashes at the moment for me (Version 1-10-2155)) can I use this to construct the desired sugar and somehow fuse it to the rest… basically like option 2? I have not found a very extensive documentation on how to play such tricks with REEL. Or would I have to rebuild a complete ligand with this SCALES? Other suggestion how to get my ligand are also welcome. Thanks André Helmholtz Zentrum Muenchen Deutsches Forschungszentrum fuer Gesundheit und Umwelt (GmbH) Ingolstaedter Landstr. 1 85764 Neuherberg www.helmholtz-muenchen.de Aufsichtsratsvorsitzende: MinDir'in Baerbel Brumme-Bothe Geschaeftsfuehrer: Prof. Dr. Guenther Wess, Dr. Alfons Enhsen, Renate Schlusen (komm.) Registergericht: Amtsgericht Muenchen HRB 6466 USt-IdNr: DE 129521671

2 1

N-acetylgalactosamine lacking amide planarity restraint
by Tristan Croll 21 Jan '16

21 Jan '16

Hi, I'm refining a structure that includes an O-linked N-acetylgalactosamine (NGA) residue, and from the way it's behaving the N-acetyl amide clearly has no restraints on its planarity. It's currently twisted almost 45 degrees from planar despite having no close contacts. Cheers, Tristan

2 2

how not to refine residue X?
by Murpholino Peligro 20 Jan '16

20 Jan '16

Hi. How to tell phenix.refine to leave residue X during refinement? I already tried in the .eff >>> strategy = *individual_sites *individual_sites_real_space rigid_body \ *individual_adp group_adp tls *occupancies group_anomalous sites { individual = not (chain A and resid 97) <<< But resid 97 is being moved to another position. I am using phenix.refine_1.10.1-2155 Thanks

2 2

phenix.sort_heteroatoms produced duplicated residue number
by luzuok 13 Jan '16

13 Jan '16

Dear phenixbb, When I use phenix.sort_hetero_atoms to resort my pdb, there are duplicated residue number of water and aa in the output pdb. Is this a bug? As there are many number gaps water, how can I fix it? Best wishes! Lu -- 卢作焜南开大学新生物站A202 Lu Zuokun, Ph.D. Candidate College of Life Science, Nankai University

1 0

pdbtools model_statistics: average B-factors
by wtempel 12 Jan '16

12 Jan '16

Hello, are the mean B-factors in the "ADP statistics" table occupancy-weighted, or perhaps weighted in any other way? If so, please could you provide the formula. Thank you. Wolfram Tempel

3 2

phenix.refine with reference model
by Falk, Sebastian 09 Jan '16

09 Jan '16

Hi! I am currently building a 3.3 A structure of a large protein. I do have a reference model at much better resolution that has 58% sequence identity and 77% similarity. The structures are quite similar, there are only a few regions with insertions. However, phenix.refine does ‘accept’ the reference model and thus creates no torsion restraints. I also tried to run ProSmart in CCP4 but there the cut-off for the reference model is 75% sequence identity. I could not find any threshold for phenix.refine though. I am happy for any suggestion or tip how to include the reference model even though the sequence identity is not as high. Thank a lot. Sebastian Sebastian Falk Max-Planck-Institute for Biochemistry Structural Cell Biology Am Klopferspitz 18 D-82152 Martinsried Germany sfalk(a)biochem.mpg.de

2 2

Generate sequence files of homodimer protein or double strand DNA for phaser MR
by Alex Lee 09 Jan '16

09 Jan '16

Dear Phenixbb members, I am using Phaser MR for solving a homodimer DNA binding protein with dsDNA complex structure. I'd like to use sequence file rather then molecular weight in the component definition of ASU. As there are solved homodimer protein structures (amino acid identity 100%) on PDB, I can download seq file (fasta form) from PDB webpage, but the seq file is only for one protein chain. I also tried online tools like "make sequence from PDB file" (http://swift.cmbi.ru.nl/servers/html/soupir.html), when I put the protein dimer bound to dsDNA pdb into the online tool, the outtput pir sequence file only shows a single protein chain and dna which dose not seems like two strands, rather then just put two 23base dna together for a 46 base length single strand DNA. I am asking is there a way to generate sequence file for a homodimer and dsDNA? or I have to generate sequence file for each chain separately (there will be four sequence files in this case, two protein chains and two dna chains)? Thanks. Alex Alex

2 1

coot generate symmetry mates like pymol
by Xiao Lei 09 Jan '16

09 Jan '16

Hi Phenixbb members, 1. Is there a function in coot which can generate symmetry mates like pymol (action--> generate symmetry mates)? I know in coot there is a "Draw---> Cell&Symmetry" function, but it seems the display results could not display my crystal packing like pymol. 2. In pymol, is there a button which just display structure in one unit cell? Thanks. Xiao

1 0

unwanted N/Q/H flipping in PHENIX.REFINE
by Bernhard Loll 06 Jan '16

06 Jan '16

Dear all, I am currently refining a 1.9 A structure with PHENIX 1.10.1-2155. The problem I am facing is the following: Running the Molprobity server, it suggests me to correct a couple of N/Q/H flips. I perform the flips re-run PHENIX.REFINE with “Automatically correct N/Q/H errors” not ticked. The log file confirms the selection with nqh_flips = False. Nevertheless PHENIX.REFINE again flips these residues and the output PDB file has all previously flipped residues “re-flipped” in comparison to the input PDB file. I am very confident that the automatically flips performed by PHENIX.REFINE (REDEUCE) are wrong, since I have two metal binding sites. Why PHENIX.REFINE rotates side chains by 180 degree even though nqh_flips were set to false? Any help is appreciated. Cheers, Bernhard Dr. Bernhard Loll Freie Universitaet Berlin Fachbereich Biologie, Chemie, Pharmazie Institut fuer Chemie und Biochemie AG Strukturbiochemie Takustr. 6 D-14195 Berlin Germany Phone: +49 (0) 30 838-57348 Fax: +49 (0) 30 838-454936 Email: loll(a)chemie.fu-berlin.de Homepage: http://www.bcp.fu-berlin.de/chemie/bc/ag/agwahl/

3 3