- phenixbb - phenix-online.org

GUP deadline approaching for APS Beamtime at NE-CAT
by Salbego, Cyndi 27 Oct '16

27 Oct '16

NE-CAT is accepting GUP proposals for the 2017-1 run cycle. Please choose 24-ID-C or 24-ID-E as your first choice to be scheduled with NE-CAT! The 24-ID-C beamline can deliver X-rays in the range of 6 to 21 keV or ~2.1 to 0.5 Å. This covers most of the popular elemental edges for phasing. This wide energy-range also makes the beamline well suited for ultra high-resolution data collection and soft X-ray sulfur SAD phasing. The beamline is equipped with an optional kappa goniometer for optimal alignment of crystals. A Pixel Array Detector (PAD), Pilatus-6MF, installed on the 24-ID-C beamline helps measure very weak Bragg reflection intensities due to its noise-less readout technology and also provides a very fast data collection capability in shutter-less data collection mode. The 24-ID-E beamline is a fixed energy microdiffraction beamline delivering X-rays at 12.66 keV, optimized for Se-SAD experiments. It is equipped with a CCD-based ADSC Quantum 315 detector. Both beamlines are equipped with state-of-the-art instrumentation to handle advanced data collection methods. MD2 microdiffractometers installed at both beamlines provide very clean beams from 5 microns to 100 microns in diameter and have exceptional sample visualization systems capable of visualizing micron-sized crystals with extreme clarity. Deadline Friday, October 28, 2016 for: - New General User Proposals (GUPs) - New Beam Time Requests for APS run 2017-1 (1/31/2017 - 4/24/2017) on existing active proposals - Partner user proposals (PUPs) - CAT Member Proposals - APS Beamline Staff Proposals - CAT Beamline Staff Proposals The GUP system (https://beam.aps.anl.gov/pls/apsweb/gup0005.start_page) will accept proposals and beam time requests until 11:59 pm (Chicago time) on October 28, 2016. However, User Office support will not be available after 5:00 pm that day. If you feel you may need help during the submission process, please create your proposal as early as possible. For questions about the GUP system or the proposal submission process, please contact gu_program(a)aps.anl.gov<mailto:[email protected]>. For guidance on the Proposal System, see https://www1.aps.anl.gov/Users-Information/About-Proposals/Concepts-Definit…. For general inquiries, please feel free to contact the User Office (630-252-9090, apsuser(a)aps.anl.gov<mailto:[email protected]>) Cyndi Salbego Administrator, NE-CAT 630.252.0689

1 0

tNCS
by Huyton, Trevor 25 Oct '16

25 Oct '16

Dear All, I have been struggling for while with a Molecular replacement problem for a large complex(3 proteins) with 2 copies per ASU. I have a small but 100% model for one of the components but this contributes only 12% of ASU (2 molecules) a much poorer <20% model that contributes the majority 80% of the ASU Space group is P222>P212121 best MR is in P21221. I have strong tNCS as seen in native patterson and phaser chooses this top peak in MR runs: There was 1 non-origin distinct peak (i.e. over 20% of origin peak and more than 15 angstroms from the origin) Sorted by Height ---------------- Height Distance Vector 56.0% 126.4 : FRAC +0.5000 +0.5000 +0.3500 (ORTH 63.0 88.0 65.4) Molrep also uses the same tNCS vector: --- Check Patterson for pseudo-translation --- PST_limit : 0.125 of origin peak INFO: pseudo-translation was detected. Origin Patterson peak: P,P/sig : 26479.002 239.412 1 Patterson peak : p,P/sig : 13591.399 122.888 2 Patterson peak : P,P/sig : 2506.590 22.664 3 Patterson peak : P,P/sig : 1517.345 13.719 Peak 1: trans.vector /ort/ : 62.995 88.023 65.691 trans.vector /frac/: 0.500 0.500 0.352 Peak 2: trans.vector /ort/ : 0.000 0.000 55.510 trans.vector /frac/: 0.000 0.000 0.297 Peak 3: trans.vector /ort/ : 58.238 88.023 65.730 trans.vector /frac/: 0.462 0.500 0.352 INFO: translation vector of peak 1 will be used. My question is how does this affect my MR with the smaller component? Is it exactly the same vector as the larger component? Thanks Trevor

1 0

Re: [phenixbb] phenix.real_space_refine
by Pavel Afonine 25 Oct '16

25 Oct '16

On 10/24/16 23:50, Pavel Afonine wrote: > I think "weight=1" may be a troublemaker.. It may be too far from > what's optimal (that program determines by default if you don't > specify any weight) and that may result in clashes that happen during > refinement. Of course, something else may cause this as well. > > Pavel > > On 10/24/16 20:07, Oleg Sobolev wrote: >> Hi Julia, >> >> In addition to Dorothee's response to your another e-mail, I would >> indeed recommend check the model geometry, in particular, bad atomic >> clashes (where 2 atoms are very close to each other). You can find >> them in the .geo file which should be created by this point or in >> log, under "Nonbonded interactions:". The worst clashes will be the >> first in the list. >> >> Best regards, >> Oleg Sobolev. >> >> On Mon, Oct 24, 2016 at 3:19 AM, Flis, Julia <julia.flis(a)charite.de >> <mailto:[email protected]>> wrote: >> >> Hello, >> >> my question is about the Phenix real space refinement. I am using >> the Phenix version phenix-1.11-2563. >> >> My command looks as follows: >> phenix.real_space_refine secondary_structure.enable=true >> Model.pdb VOL.map elbow.Model_pdb.001.cif Model.pdb_ss.eff >> resolution=3.8 weight=1 >> >> My problem is that the refinement suddenly stops during the first >> refinement cycle: >> >> >> >> Model_real_space_refined.log says: >> >> ********************** REFINEMENT MACRO_CYCLE 1 OF 5 >> ************************* >> ------------------------------------------------------------------------------- >> Update NCS operators >> ******************** >> ------------------------------------------------------------------------------- >> Update rotamer restraints >> ************************* >> ------------------------------------------------------------------------------- >> Global refinement >> ***************** >> END >> >> >> In the shell I get this : >> >> [...] >> distance: 184426 - 184921: 3.388 >> distance: 184428 - 184920: 3.342 >> distance: 184448 - 184898: 3.373 >> distance: 184449 - 184897: 3.187 >> distance: 184491 - 184860: 3.066 >> distance: 184531 - 184770: 3.203 >> distance: 184554 - 184746: 3.137 >> >> then it stops and the only files generated are >> Model_real_space_refined.log and Model_initial.geo. >> >> Could you give me an advise? I have no clue what the problem >> could be. >> >> Thank you, >> >> Julia >> >> >

1 0

Post for Ass. Prof. position
by Nigel Moriarty 25 Oct '16

25 Oct '16

Dear Phenix community, An *Assistant Professor position in microbiology or biochemistry* (Position # 22809) is currently open in the Department of Microbiology, University of Manitoba, Canada. Structural biology (protein X-ray crystallography) is a key strength of our Department and so applicants with such a background are encouraged to apply. Please see the ad below for details. *For further information contact the Search Committee Chair <Deborah.Court(a)umanitoba.ca <Deborah.Court(a)umanitoba.ca>>. The closing date for receipt of applications is Friday, January 6, 2017* ——— The Department of Microbiology invites applications for a full-time tenure-track position at the Assistant Professor level, commencing July 1, 2017, or on a date hing and research. Outstanding candidates in any area of Microbiology or Biochemistry will be considered, with particular emphasis on candidates who will complement or extend the department’s strengths. The successful candidate will have a Ph.D. and preferably post-doctoral experience or industry experience or other distinguishing attributes in host-microbe interactions, antibiotic resistance and drug discovery, structural biology, protein and membrane biochemistry, systems microbiology, and industrial and applied microbiology, or a related field. Duties will involve research, including the establishment of an externally funded research program, undergraduate teaching, graduate teaching and supervision, and service-related activities. The successful candidate will have a track record of high quality scholarly research leading to peer assessed publications; will either have, or demonstrate the potential to establish, an independent, innovative, scholarly, externally fundable research program; will have demonstrated strength in or strong potential for outstanding teaching contributions; and will exhibit evidence of the ability to work in a collaborative environment. Salary will be commensurate with experience and qualifications. To enhance our department and create role models for a diverse population of students, we particularly invite application from those who can support and enhance our diversity, including women, Indigenous peoples, other visible minorities, and those committed to a diverse environment. The Department currently has twelve full time tenured and tenure track faculty members and three Instructors, and offers a full range of both undergraduate and graduate programs in Microbiology and Biochemistry. The Department has a well-established and equipped research facility, including X-ray crystallography and large scale mammalian and prokaryotic cell culture facilities, as well as access to state of the art light microscopy, electron microscopy, and small angle x‑ray scattering instrumentation, and is supported by strong research links with other University of Manitoba departments including Chemistry, Biological Sciences, Physics, Biosystems Engineering, Biochemistry and Medical Genetics, and Plant Science and with the National Microbiology Laboratory of the Public Health Agency of Canada in Winnipeg. Further information about the Department can be obtained from <www.sci.umanitoba.ca/microbiology>. Winnipeg is the largest city in the Province of Manitoba. The city has a rich cultural environment, including symphony, opera, dance, theatre, and ethnic festivals and professional hockey and football. The region provides ample opportunities for outdoor recreation in all seasons. Learn more about Winnipeg at <winnipeg.ca>. The University of Manitoba is strongly committed to equity and diversity within its community and especially welcomes applications from women, members of racialized communities, Indigenous persons, persons with disabilities, persons of all sexual orientations and genders, and others who may contribute to the further diversification of ideas. All qualified candidates are encouraged to apply; however, Canadian citizens and permanent residents will be given priority. *Applications including a curriculum vitae, a description of teaching philosophy, a summary of research interests, a three page research plan and contact information for three references should be sent to <Deborah.Court(a)umanitoba.ca <Deborah.Court(a)umanitoba.ca>> (a single PDF file is preferred). Please ensure to specify position number 22809 in the application. For further information contact the Search Committee Chair at <Deborah.Court(a)umanitoba.ca <Deborah.Court(a)umanitoba.ca>>. The closing date for receipt of applications is Friday, January 6, 2017.* Application materials, including letters of reference, will be handled in accordance with the Freedom of Information and Protection of Privacy Act. Please note that curricula vitae may be provided to participating members of the search process. -------- Brian ============================== Brian Mark, MSc, PhD Associate Professor Department of Microbiology & Department of Biochemistry and Medical Genetics Mailing/Courier address: Department of Microbiology Rm 213 Buller Building University of Manitoba 45 Chancellor's Circle Winnipeg, Manitoba CANADA R3T 2N2 Phone (204) 480-1430 Fax (204) 474-7603 Web: http://home.cc.umanitoba.ca/~bmark/Welcome.html Cheers Nigel --- Nigel W. Moriarty Building 33R0349, Molecular Biophysics and Integrated Bioimaging Lawrence Berkeley National Laboratory Berkeley, CA 94720-8235 Phone : 510-486-5709 Email : NWMoriarty(a)LBL.gov Fax : 510-486-5909 Web : CCI.LBL.gov

1 0

Re: [phenixbb] XN-refinement
by Pavel Afonine 17 Oct '16

17 Oct '16

>> this is good to hear, and this demonstrates the power of using more data. The only issue here, as I mentioned before, is that in joint XN refinement we refine one single model against two data sets, while ideally it should be two models in order to account for genuine unique information that is contained in X-ray and neutron data. This will be addressed at some point. >> > Out of curiosity, could you elaborate on why it would be preferred to refine two separate models? It seems to me, admittedly not having any experience with neutron diffraction, that the ultimate goal is to model the system of the crystal, and given 2 data sets, we would want to create the single model describing the structure in the crystal that best agrees with all the available data. Are the neutron and X-ray data so different that using them for joint refinement is disadvantageous? I think I wrote that already in previous email.. Structures corresponding to two data sets are of course overall similar may be different in local details: - Different X-H(D) distances (see figure 4 here: http://journals.iucr.org/d/issues/2010/11/00/dz5209/index.html) - Different data collection temperatures: -- Different B factors; -- Different visible water structure; -- Different local disorder (that may be captured as distinct conformations at low temperature, but may be blurred at higher temperature); - Different completeness and resolution of one data set may allow features in one model corresponding to this data set that may not be supported by the other data set. For example, you may see a well resolved water with one or two D in neutron map but you may not even see any water at all in X-ray map, or the other way around. - etc etc etc. So it is advantageous to use both X-ray and neutron data sets together but these nuances need to be carefully taken care of which isn't the case in current implementations of joint XN refinement protocols. This makes a good room for future improvements. Pavel

3 2

constrain insertion codes to unit occupancy?
by van den Bedem, Henry 16 Oct '16

16 Oct '16

Hi: I’m refining a site where there’s two compounds, each at partial occupancy. I modeled that using alt codes and insertion codes combined, like this ATOM 6500 CA ACYS B 101B ATOM 6490 CA BXXX B 101A How can I constrain the occupancies so that they sum to unity? I tried several option, but the distinct insertions seem to refine independently. Sorry if a similar question has been posted before, but I could not find a solution searching phenixbb. Thanks! Henry

4 4

XN-refinement
by Johannes Schiebel 15 Oct '16

15 Oct '16

Hi everyone, I am currently working on an X-ray/neutron (XN) joint refinement using phenix.refine. As it should be, H/D coordinates and ADPs at exchangable sites are refined to equal values when using Phenix version 1.10.1-2155 and neutron data only. This is also stated in the paper describing the development of the method (Afonine et al. (2010) Joint X-ray and neutron refinement with phenix.refine. Acta Crystallogr D Biol Crystallogr 66, 1153-1163) as the default behavior: "Currently, phenix.refine maintains the H and D atoms at coinciding positions and constrains their ADPs to be equal to each other". However, when switching to XN-refinement using the same Phenix version, H and D atoms refine to different coordinates and ADPs, which should not be the case as it leads to unrealistic artifacts as can be seen from the deposited PDB 3X2P: ATOM 186 H AALA A 13 3.486 -18.200 -14.123 0.38 14.54 H ATOM 187 D BALA A 13 3.488 -18.195 -14.111 0.62 38.07 D In this example, the D-occupancy is likely overestimated, while the H-occupancy is underestimated because the ADPs refine to very different values, which is chemically not reasonable. Hence my question: How can I treat my data in a way that ADPs and coordinates refine to the same values at exchangeable H/D sites also for XN-refinement? Is there a specific keyword I am currently overlooking or do I have to use another Phenix version? I would be really glad to receive your feedback. Thanks in advance! Kind regards, Johannes

4 9

Unknown parameter file format
by Jan van Agthoven 12 Oct '16

12 Oct '16

Hi everyone, I used my refinement parameters in the following format in the latest phenix: custom_par.params And it returned: Sorry: Unknown file format: custom_par.params Anyone knows how to solve this? Thanks, Jan

2 1

Re: [phenixbb] Highly anisotropic data
by Pavel Afonine 07 Oct '16

07 Oct '16

Hi Kostya, phenix.resolution reports effective resolution of data set. It is based on methods described here: J. Appl. Cryst. (2015). 48, 589-597 Acta Cryst. (2013). D69, 1921-1934 As I pointed out before, a single number for highest resolution isn't very informative unless you show data completeness per resolution (in phenix.refine log file it is reported in the beginning of macro-cycles right after bulk-solvent step). Pavel On 10/7/16 00:15, Kogan, Konstantin wrote: > Dear all, > > Thank you for your comments. The maps are not that bad, and actually > from biological point of view we do see everything we want. One of the > questions is how to report the parameters for the structure, as I have > a feeling that the effective resolution is much lower than 2.64Å, > which is the current limit, and the mean B value is twice higher than > estimated Wilson B value. All together it seems that this is the data > I have, but I would like to be sure, that I have got maximum out of it. > > I attach the xtriage log file for more information, if needed. Also I > attached the example of a good map region at 1.6 sigma and a bad map > region at 1.0 sigma. > > I have also tested to refine at 2.8, 2.9, and 3.0, and I haven't seen > much difference in maps quality, but the Rwork/Rfree went down a bit. > > Isn't is seems a bit suspicious 2.64Å resolution, > Rwork/Rfree=0.28/0.31, and mean B value 114? Is there a way to > present/report effective resolution? > > Kostya > > > > > Hi Kostya, > > how complete the data set is? Missing reflections in some resolution > zones between 2.64A and inf may be sufficient to make the effective > resolution lower or much lower than 2.64A which would explain why the > map does not look like what you expect. > > Pavel > > > On 05/10/16 22:53, Randy Read wrote: >> Hi, >> >> As Christian said, the level of anisotropy is not that bad for this >> structure. In terms of what Phenix can do to handle it, first, when >> you solved it by MR, Phaser would have accounted explicitly for the >> anisotropy. In fact, Phaser’s algorithms underlie the anisotropy >> server that produced your plot! Phenix.refine will also refine the >> overall anisotropy parameters. >> >> When you have really severe anisotropy, the current algorithms may >> not account well enough for the differing accuracy of reflections in >> the weak directions. So it can sometimes be helpful to do >> anisotropic pruning of the data in the way that the anisotropy server >> implements it. But this is something to do with some caution, and I >> think you should only press on with it if the maps allow you to see >> things you couldn’t see clearly before. >> >> Best wishes, >> >> Randy Read >> >> ----- >> Randy J. Read >> Department of Haematology, University of Cambridge >> Cambridge Institute for Medical Research Tel: +44 1223 336500 >> Wellcome Trust/MRC Building Fax: +44 1223 336827 >> Hills Road E-mail: rjr27(a)cam.ac.uk >> Cambridge CB2 0XY, U.K. www-structmed.cimr.cam.ac.uk >> >>> On 5 Oct 2016, at 20:32, Christian Roth <christianroth034(a)gmail.com> >>> wrote: >>> >>> Hi Kostya, >>> >>> I have seen worse data than that, which are ususally treated quite >>> well within phenix using standard parameters. With a resolution of >>> about 2.7 Ang. I wouldn't expect to see waters and also just well >>> ordered side chains, whereas more flexible ones just give some >>> "bumps" pointing away from the main chain density. Though without a >>> picture or something else it is difficult to say if your maps are >>> really unusually bad. >>> >>> Cheers >>> >>> Christian >>> >>> Am 05.10.2016 um 07:47 schrieb Kogan, Konstantin: >>>> Dear all, >>>> >>>> I have highly anisotropic data. I was able to solve the structure >>>> by MR, and refine it with phenix.refine to Rwork/Rfree=0.28/0.31 >>>> with Resolution cutoff 2.64Å and mean B values 114, which is pretty >>>> high for such resolution. Though the overall structure makes sense, >>>> the maps are quite featureless, no water molecules, and side-chains >>>> refinement is a problem. I have tested how the data is anisotropic >>>> with Diffraction Anisotropy Server (see attached image), which >>>> shows clearly, that we don't really have data to 2.64Å in all >>>> directions. Though, there are other servers/programs that can deal >>>> specifically with anisotropic data e.g. STARANISO anisotropy server >>>> and then refine with BUSTER, I would like to know if it's possible >>>> still to use Phenix with some more advance parameters to actually >>>> address the issue of anisotropy and to get maximum out of the data. >>>> The space group is P61 2 2, cell parameters are 73, 73, 453, 90, >>>> 90, 120 and I have high multiplicity data, but no NCS. >>>> >>>> Thanks in advance for any input, >>>> >>>> Kostya >>>> -- >>>> Konstantin (Kostya) Kogan >>>> Postdoctoral researcher >>>> Pekka Lappalainen's Lab >>>> Institute of Biotechnology >>>> University of Helsinki >>>> Helsinki, Finland >>>> Mobile: +358-(0)45-8994342 >>>> >>>> >>>> >>>> _______________________________________________ >>>> phenixbb mailing list >>>> >>>> phenixbb(a)phenix-online.org >>>> http://phenix-online.org/mailman/listinfo/phenixbb >>>> >>>> Unsubscribe: >>>> phenixbb-leave(a)phenix-online.org >>> _______________________________________________ >>> phenixbb mailing list >>> phenixbb(a)phenix-online.org >>> http://phenix-online.org/mailman/listinfo/phenixbb >>> Unsubscribe: phenixbb-leave(a)phenix-online.org

1 0

Option to select array from mtz in phenix.real_space_refine?
by Oliver Clarke 06 Oct '16

06 Oct '16

Hi, I find phenix.real_space refine very effective for initial refinement of a model against a density modified map after molecular replacement (with morphing and reference restraints etc enabled). However, when I do this it seems like if there is more than one array of map coefficients in the file there is no way to select which columns to use, unlike for phenix.refine - would it be possible to add such an option? Currently I just use cad in ccp4 to make a file with the desired columns, but it would be a smoother process if the desired column labels could be specified directly at run time. Cheers Oli

3 5